Skip to main content
SpringerLink
Log in

A compendium of sources of fracture toughness and fatigue-crack growth data for metallic alloys

  • Published:
International Journal of Fracture Aims and scope Submit manuscript

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

References

  1. R. C. Owen, Y. W. Mai, and C. L. Chow, IJF 12 (1976) 3–17.

    Google Scholar 

  2. Y. W. Mai, A. G. Atkins, and R. M. Caddell, IJF 12 (1976) 391–407.

    Google Scholar 

  3. Damage Tolerant Design Handbook, MCIC-HB-01, Metals and Ceramics Information Center, Battelle Columbus Laboratories (1973).

  4. D. L. Jones, H. Liebowitz, and J. Eftis, EFM 6 (1974) 639–652.

    Google Scholar 

  5. R. L. Moore, G. E. Nordmark, and J. G. Kaufman, EFM 4 (1972) 51–63.

    Google Scholar 

  6. Cryogenic Materials Data Handbook, AFML-TDR-64–280 (Revised 1968).

  7. J. R. Low, Jr.; in Prospects of Fracture Mechanics, Noordhoff International Publishing (1974) 35–49.

  8. J. L. Christian, C. T. Yang, and W. E. Wetzell, ASD TDT-62–258 (1964).

  9. J. G. Kaufman, J. W. Clark, and M. Holt, MEQ 13 (February 1973) 4–11.

    Google Scholar 

  10. F. A. Johnson and J. C. Radon, Journal Testing and Evaluation 4 (1976) 209–217.

    Google Scholar 

  11. C. M. Carman, D. F. Armiento, and H. Markus, JBE 87 (1965) 904–916.

    Google Scholar 

  12. J. E. Campbell, DMIC Report S-28 (1969).

  13. G. C. Sih and B. MacDonald, EFM 6 (1974) 361–386.

    Google Scholar 

  14. T. W. Orange, EFM 3 (1971) 53–69.

    Google Scholar 

  15. W. T. Matthews, Army Materials and Mechanics Research Center, Report AMMRC MS-73–6 (1973).

  16. J. G. Kaufman, Fracture Prevention and Control, ASM Materials/ Metalworking Technology Series (1974) 121–142.

  17. H. I. McHenry, Advances in Cryogenic Engineering 22, Plenum Press, New York (1977) 9–26.

    Google Scholar 

  18. Deleted.

  19. Aerospace Structural Metals Handbook, AFML-TR-68–115, 2 (Revised to 1975).

  20. F. R. Schwartzberg, R. D. Keys, and T. F. Kiefer, MEQ 9 (November 1969) 53–56.

    Google Scholar 

  21. J. G. Bjeletich, T. M. Morton, and R. E. Lewis, WJ 53 (1974) 153s-160s.

    Google Scholar 

  22. I. E. Figge and C. M. Hudson, NASA TN D-3825 (1967).

  23. A. M. Sullivan, C. N. Freed, and J. Stoop, Fracture Toughness Evaluation by R-Curve Methods, STP 527, American Society for Testing and Materials, Philadelphia (1973) 85–104.

    Google Scholar 

  24. B. L. Averbach, Fracture Prevention and Control, ASM Materials/ Metalworking Technology (1974) 97–120.

  25. E. A. Steigerwald and G. L. Hanna, TMS 242 (1968) 320–328.

    Google Scholar 

  26. Anon., MP 105 (March 1974) 41–75.

  27. R. E. Zinkham and R. J. Baughan, EFM 9 (1977) 147–154.

    Google Scholar 

  28. C. W. Ten Haagen and J. T. Berry, 4th International Conference Fracture, Waterloo, Canada, 3 (1977) 565–572.

    Google Scholar 

  29. G. T. Hahn, A. K. Mukherjee, and A. R. Rosenfield, EFM 2 (1971) 273–286.

    Google Scholar 

  30. W. W. Gerberich and V. F. Zackey, WJ 47 (1968) 378s-384s.

    Google Scholar 

  31. J. E. Campbell, MCIC Review of Metals Technology, Low-Temperature Properties of Metals (April 1, 1977).

  32. F. G. Nelson and J. G. Kaufman, Progress in Flaw Growth and Fracture Toughness Testing, STP 536, American Society for Testing and Materials, Philadelphia (1973) 350–376.

    Google Scholar 

  33. B. Mukherjee, IJF 8 (1972) 449–452.

    Google Scholar 

  34. J. C. Tafuri and R. Roberts, ASME Pressure Vessels and Piping Paper, 70-WA/PVP-5 (1970).

  35. R. A. Kelsey, R. H. Wygonik and P. Tenge, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 44–79.

    Google Scholar 

  36. J. G. Kaufman and R. A. Kelsey, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 138–158.

    Google Scholar 

  37. S. Y. Zamrik and F. M. Bahgat, JPVT 97 (1975) 284–290.

    Google Scholar 

  38. F. D. Bogar and T. W. Crooker, NRL Report 8153 (1977).

  39. H. P. Chu, JEMT 96 (1974) 261–267.

    Google Scholar 

  40. W. G. ClarkJr., EFM 1 (1968) 385–397.

    Google Scholar 

  41. R. C. Bates and W. G. ClarkJr., TASM 62 (1969) 380–389.

    Google Scholar 

  42. J. P. HickersonJr., EFM 9 (1977) 727–734.

    Google Scholar 

  43. J. J. Kibler and R. Roberts, JEI 92 (1970) 727–734.

    Google Scholar 

  44. A. R. Duffy and R. J. Eiber, Natural Gas Research and Technology Conference. [Proceedings of Session II, Paper 1 (1971)].

  45. R. P. Kambour and S. Miller, JMS 12 (1977) 2281–2290.

    Google Scholar 

  46. O. L. Deel and H. Mindlin, AFML-TR-72–196, 2 (1972).

  47. J. Mautz and V. Weiss, Cracks and Fracture, STP 601, American Society for Testing and Materials, Philadelphia (1976) 154–168.

    Google Scholar 

  48. C. M. Hudson and J. C. Newman, Jr., NASA TN D-7173 (1973).

  49. C. M. Hudson, NASA TN-D-7262 (1973).

  50. M. I. Baskes, EFM 6 (1974) 11–18.

    Google Scholar 

  51. D. Broek, EFM 6 (1974) 173–181.

    Google Scholar 

  52. W. H. Reimann and A. W. Brisbane, EFM 5 (1973) 67–78.

    Google Scholar 

  53. C. N. Freed, A. M. Sullivan, and J. Stoop, National Symposium of Fracture Mechanics, Part 2 Fracture Toughness, STP 514, American Society for Testing and Materials, Philadelphia (1972) 98–113.

    Google Scholar 

  54. R. H. Hayer and D. E. McCabe, EFM 4 (1972) 393–412.

    Google Scholar 

  55. O. Buck, J. D. Frandsen, and H. L. Marcus, EFM 7 (1975) 167–171.

    Google Scholar 

  56. R. J. Goode and R. W. JudyJr., WJ 53 (1974) 135s-143s.

    Google Scholar 

  57. R. E. Zinkham, TMS 245 (1969) 1519–1525.

    Google Scholar 

  58. R. J. Bucci and G. T. Sha, Journal Testing and Evaluation 5 (1977) 94–95.

    Google Scholar 

  59. S. Pearson, EFM 4 (1972) 9–24.

    Google Scholar 

  60. C. J. Peel, R. N. Wilson, and P.J.E. Forsyth, Metal Science Journal 6 (1972) 102–106.

    Google Scholar 

  61. C. J. Peel and P.J.E. Forsyth, Metal Science Journal 7 (1973) 121–127.

    Article  Google Scholar 

  62. L. P. Pook, EFM 3 (1971) 205–218.

    Google Scholar 

  63. M. J. May, Review of Developments in Plane Strain Fracture Toughness Testing, STP 463, American Society for Testing and Materials, Philadelphia (1970) 41–62.

    Google Scholar 

  64. J. S. Santner and M. E. Fine, MT 7A (1976) 583–593.

    Google Scholar 

  65. F. A. Johnson and J. C. Radon, IJF 8 (1972) 21–36.

    Google Scholar 

  66. P. F. Langstone, Journal of the British Interplanetary Society 25 (1972) 253–277.

    Google Scholar 

  67. N. J. Adams, Cracks and Fracture, STP 601, American Society for Testing and Materials, Philadelphia (1976) 330–345.

    Google Scholar 

  68. M. F. Light, A. R. Luxmoore, and W. T. Evans, IJF 12 (1976) 503–506.

    Google Scholar 

  69. G. Berry and R. Brook, MS 10 (1976) 286–290.

    Google Scholar 

  70. A. R. Rosenfield and A. J. McEvily, Metallurgical Aspects of Fatigue and Fracture Toughness, AGARD Report No. R-610 (1973) 23–54.

  71. C. M. Hudson, NASA TN D-2743 (1965).

  72. C. M. Hudson and H. F. Hardrath, NASA TN D-960 (1961).

  73. C. M. Hudson, NASA TN D-5390 (1969).

  74. H. H. Johnson and P. C. Paris, EFM 1 (1968) 3–45.

    Google Scholar 

  75. K. H. Schwalbe, IJF 9 (1973) 381–395.

    Google Scholar 

  76. T. Kanazawa, S. Machida, and K. Itoga, EFM 7 (1975) 445–455.

    Google Scholar 

  77. R. W. Hertzberg and W. J. Mills, Fractography — Microscopic Cracking Processes, STP 600, American Society for Testing and Materials, Philadelphia (1976) 220–234.

    Google Scholar 

  78. T. M. Morton, S. Smith, and R. M. Harrington, EM 14 (1974) 208–213.

    Google Scholar 

  79. T. W. Crooker, EFM 5 (1973) 35–43.

    Google Scholar 

  80. T. W. Crooker, JEMT 95 (1973) 150–155.

    Google Scholar 

  81. J. S. Enochs and O. F. Devereux, MT 6A (1975) 391–397.

    Google Scholar 

  82. J. E. Campbell, MCIC Review of Metals Technology, Low-Temperature Properties of Metals (December 3, 1976).

  83. R. L. Tobler and R. P. Reed, Advances in Cryogenic Engineering, 22, Plenum Press, New York (1977) 35–46.

    Google Scholar 

  84. N. L. Person and G. C. Wolfer, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 80–95.

    Google Scholar 

  85. F. Jeglic, P. Niessen, and D. J. Burns, Fatigue at Elevated Temperatures, STP 520, American Society for Testing and Materials, Philadelphia (1973) 139–147.

    Google Scholar 

  86. T. W. Crooker, F. D. Bogar, and W. R. Cares, NRL Report 8042 (1976).

  87. Deleted.

  88. J. M. Barsom, Damage Tolerance in Aircraft Structures, STP 486, American Society for Testing and Materials, Philadelphia (1971) 1–15.

    Google Scholar 

  89. S. M. El-Soudani and R. M. Pelloux, WJ 54 (1975) 144s-153s.

    Google Scholar 

  90. D. O. Harris and H. L. Dungan, EM 14 (1974) 71–81.

    Google Scholar 

  91. C. J. McMahon, JEMT 95 (1973) 142–149.

    Google Scholar 

  92. F. J. Bradshaw and C. Wheeler, IJF 5 (1969) 255–268.

    Google Scholar 

  93. W. J. Plumbridge, JMS 7 (1972) 939–962.

    Google Scholar 

  94. N. E. Frost, L. P. Pook, and K. Denton, EFM 3 (1971) 109–126.

    Google Scholar 

  95. S. Pearson, EFM 7 (1975) 235–247.

    Google Scholar 

  96. C. M. Branco, J. C. Radon, and L. E. Culver, Journal Testing and Evaluation 3 (1975) 407–413.

    Google Scholar 

  97. J. C. Radon and L. E. Culver, EM 16 (1976) 105–110.

    Google Scholar 

  98. J. M. Barsom, EFM 7 (1975) 605–618.

    Google Scholar 

  99. E. Banks, WJ 53 (1974) 299s-306s.

    Google Scholar 

  100. J. T. Taylor, P. E. Lewis, and J. W. RamseyJr., JEMT 96 (1974) 283–291.

    Google Scholar 

  101. P. T. Heald, G. M. Spink, and P. J. Worthington, MSE 10 (1972) 129–138.

    Google Scholar 

  102. J. Dufresne, IJF 12 (1976) 201–215.

    Google Scholar 

  103. A. W. Loginow and E. H. Phelps, JEI 97 (1975) 274–282.

    Google Scholar 

  104. A. W. Pense and R. D. Stout, Welding Research Council Bulletin 205, (1975).

  105. K. Ikeda, S. Yamamoto, M. Aoki, A. Kinchi, and T. Shirakura, Third International Conference on Pressure Vessel Technology, Part II, Tokyo, Japan (1977) 647–653.

  106. J. Kihara, T. Kanazawa, Y. Ando, S. Machide, and K. Ikeda, Atomic Energy Review 9 (1971) 687–786.

    Google Scholar 

  107. W. G. ClarkJr. and E. T. Wessel, Review of Developments in Plane Strain Fracture Toughness Testing, STP 463, American Society for Testing and Materials, Philadelphia (1970) 160–190.

    Google Scholar 

  108. H. D. Greenberg and W. G. ClarkJr., MEQ 9 (August 1969) 30–39.

    Google Scholar 

  109. W. A. Logsdon and J. A. Begley, EFM 9 (1977) 461–470.

    Google Scholar 

  110. C. M. Hudson, J. C. Newman, Jr., and P. E. Lewis, NASA TM X-3316 (1975).

  111. A. W. Gunderson, AFML-TR-74–133 (1974).

  112. A. K. Shoemaker and S. T. Rolfe, EFM 2 (1971) 319–339.

    Google Scholar 

  113. A. J. Bush, Impact Testing of Metals, STP 466, American Society for Testing and Materials, Philadelphia (1970) 259–280.

    Google Scholar 

  114. J. Malkin and A. S. Tetelman, EFM 3 (1971) 151–167.

    Google Scholar 

  115. Deleted.

  116. M. J. Manjoine, JBE 87 (1965) 293–298.

    Google Scholar 

  117. D. F. Mowbray, A. J. Brothers, and S. Yukawa, JBE 88 (1966) 783–791.

    Google Scholar 

  118. H. T. Corten and A. K. Shoemaker, JBE 89 (1967) 86–92.

    Google Scholar 

  119. A. L. Luttrell and H. L. Henderson, AIAA Paper 74–364, AIAA/ASME/ SAE 15th Structures, Structural Dynamics and Materials Conference (1974).

  120. A. Omsen, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 421–424.

    Google Scholar 

  121. C. K. Syn, S. Jin, and J. W. MorrisJr., MT 7A (1976) 1827–1832.

    Google Scholar 

  122. W. F. BrownJr. and J. E. Srawley, Plane Strain Crack Toughness Testing of High Strength Metallic Materials, STP 410, American Society for Testing and Materials, Philadelphia (1967).

    Google Scholar 

  123. R. P. Reed, R. L. Tobler, and R. P. Mikesell, Advances in Cryogenic Engineering, 22, Plenum Press, New York (1977) 68–79.

    Google Scholar 

  124. H. D. Greenberg, E. T. Wessel, and W. H. Pryle, EFM 1 (1970) 653–674.

    Google Scholar 

  125. G. C. Robinson, J. E. Smith, R. W. Derby, and G. D. Whitman, ASME Paper 74-Mat-5 (1974).

  126. S. Sugino and A. W. Pense, Effect of Warm Prestressing on the Fracture Toughness of Pressure Vessel Steels, Department of Metallurgy and Materials Science, Lehigh University, Office of Research (March 26, 1976).

  127. Deleted.

  128. W. A. Van Der Sluys, R. R. Seeley, J. E. Schwabe, A. L. Lowe, Jr., and P. S. Ayres, Electrical Power Research Institute, Report EPRI NP-122 (1976).

  129. K. E. Stahlkopf, R. E. Smith, W. L. Server, and R. A. Wullaert, JPVT 99 (1977) 470–476.

    Google Scholar 

  130. L. A. James, WJ 51 (1972) 506s-507s.

    Google Scholar 

  131. L. N. Succop, A. W. Pense, and R. D. Stout, WJ 49 (1970) 354s-364s.

    Google Scholar 

  132. J. M. Barsom and J. V. Pellegrino, EFM 5 (1973) 209–221.

    Google Scholar 

  133. J. M. Barsom and S. T. Rolfe, Impact Testing of Metals, STP 466, American Society for Testing and Materials, Philadelphia (1970) 281–302.

    Google Scholar 

  134. S. T. Rolfe and S. R. Novak, Review of Developments in Plane Strain Fracture Toughness Testing, STP 463, American Society for Testing and Materials, Philadelphia (1970) 124–159.

    Google Scholar 

  135. G. T. Hahn, R. G. Hoagland, and A. R. Rosenfield, Prospects of Fracture Mechanics, Noordhoff International Publishing (1974) 267–280.

  136. V. J. Gentilicore, A. W. Pense, and R. D. Stout, WJ 49 (1970) 341s-353s.

    Google Scholar 

  137. L. W. Server and A. S. Tetelman, EFM 4 (1972) 367–375.

    Google Scholar 

  138. J. R. Hawthorne and T. R. Mager, National Symposium on Fracture Mechanics, Part 2, Fracture Toughness, STP 514, American Society for Testing and Materials, Philadelphia (1972) 151–163.

    Google Scholar 

  139. T. R. Mager and F. O. Thomas, Westinghouse Electric Corp., Atomic Power Division, WCAP-7328 (Revised 1969).

  140. A. P. Glover, F. A. Johnson, and J. C. Radon, EM 17 (1977) 172–178.

    Google Scholar 

  141. D. F. Socie and S. D. Antolovich, WJ 53 (1974) 267s-271s.

    Google Scholar 

  142. Aerospace Structural Metals Handbook, AFML-TR-68–115, 1 (Revised 1975).

  143. R. R. Seeley, W. A.Van Der Sluys, and A. L. LoweJr., JPVT 99 (1977) 419–426.

    Google Scholar 

  144. Deleted.

  145. A. W. Pense and R. D. Stout, Fracture Toughness of Cryogenic Nickel Steels, Office of Research, Lehigh University (1976).

  146. N. Murayama, A. W. Pense, and R. D. Stout, Advances in Cryogenic Engineering, 22, Plenum Press, New York (1977) 68–79.

    Google Scholar 

  147. T. Sakai, H. Takashima, K. Tanaka, H. Matsumae, and H. Yajima, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 205–237.

    Google Scholar 

  148. R. L. Tobler, R. P. Mikesell, R. L. Durcholz, and R. P. Reed, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 261–287.

    Google Scholar 

  149. D. A. Sarno, J. P. Bruner, and G. E. Kampschaefer, WJ 53 (1974) 486s-494s.

    Google Scholar 

  150. D. E. McCabe, D. A. Sarno, and C. E. Fedderson, Properties of Materials for Liquefied Natural Gas Tankage, STP 579, American Society for Testing and Materials, Philadelphia (1975) 238–260.

    Google Scholar 

  151. H. I. McHenry and R. P. Reed, WJ 56 (1977) 104s-112s.

    Google Scholar 

  152. A. R. Johnson, MT 8A (1977) 891–897.

    Google Scholar 

  153. W. E. Wood, EFM 7 (1975) 219–234.

    Google Scholar 

  154. L. J. McEowen, MP 107 (March 1975) 52–53.

    Google Scholar 

  155. R. O. Ritchie, MS 11 (1977) 368–381.

    Google Scholar 

  156. R. O. Bennett and H. Mindlin, Journal Testing and Evaluation 1 (1973) 152–161.

    Google Scholar 

  157. W. W. Gerberich, MEQ 4 (November 1964) 23–42.

    Google Scholar 

  158. E. R. Parker and V. F. Zackay, EFM 5 (1973) 147–165.

    Google Scholar 

  159. E. R. Parker and V. F. Zackay, EFM 7 (1975) 371–375.

    Google Scholar 

  160. E. A. Steigerwald, Review of Developments in Plane Strain Fracture Toughness Testing, STP 463, American Society for Testing and Materials, Philadelphia (1970) 102–123.

    Google Scholar 

  161. E. A. Steigerwald, EFM 1 (1969) 473–494.

    Google Scholar 

  162. C. S. Carter, EFM 3 (1971) 1–13.

    Google Scholar 

  163. I. L. Purdy and J. Shewchuk, Journal Materials 7 (1972) 38–42.

    Google Scholar 

  164. G. T. Hahn, R. G. Hoagland, and A. R. Rosenfield, MT 7A (1976) 49–54.

    Google Scholar 

  165. S. Floreen, JEMT 99 (1977) 70–75.

    Google Scholar 

  166. B. L. Averbach, 4th International Conference Fracture, Waterloo, Canada, 1 (1977) 201–214.

    Google Scholar 

  167. E. S. Folias, Prospects of Fracture Mechanics, Noordhoff International Publishing (1974) 405–418.

  168. D. L. Holt, P. S. Khor, and M. O. Lai, EFM 6 (1974) 307–313.

    Google Scholar 

  169. M. Grounes and S. Rao, TASM 62 (1969) 902–914.

    Google Scholar 

  170. J. T. Barnby and I. S. Al-Daimalani, JMS 11 (1976) 1989–1994.

    Google Scholar 

  171. J. T. Barnby and R. Holder, MS 11 (1977) 5–10.

    Google Scholar 

  172. V. F. Zackay, W. W. Gerberich, R. Busch, and E. R. Parker, IJF 2 (1966) 638–644.

    Google Scholar 

  173. R. T. Ortiz, MP 111 (March 1977) 54.

    Google Scholar 

  174. C. M. Carman and J. M. Katlin, JBE 88 (1966) 792–800.

    Google Scholar 

  175. P. J. Worthington and P. T. Heald, International Journal Pressure Vessels and Piping 1 (1973) 17–25.

    Article  Google Scholar 

  176. G. G. Chell and P. J. Worthington, MSE 26 (1976) 95–103.

    Google Scholar 

  177. G. G. Chell and A. Davidson, MSE 24 (1976) 45–52.

    Google Scholar 

  178. E. K. Priddle, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 1249–1257.

    Google Scholar 

  179. P.R.V. Evans, N. B. Owen, and B. E. Hopkins, EFM 3 (1971) 463–473.

    Google Scholar 

  180. J. N. Robinson and C. W. Tuck, EFM 4 (1972) 377–392.

    Google Scholar 

  181. J. N. Robinson, IJF 12 (1976) 723–737.

    Google Scholar 

  182. W. G. Ferguson and M. N. Sargisson, EFM 5 (1973) 499–508.

    Google Scholar 

  183. T. V. Duggan, EFM 9 (1977) 735–747.

    Google Scholar 

  184. R. O. Ritchie and J. F. Knott, MT 5 (1974) 782–785.

    Google Scholar 

  185. J. C. Radon and C. E. Turner, EFM 1 (1969) 411–428.

    Google Scholar 

  186. W. L. Phillips, MT 4 (1973) 388–390.

    Google Scholar 

  187. L. M. Barker and W. C. Leslie, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 305–311.

    Google Scholar 

  188. J. G. Blauel, H. R. Smith, and G. Schulze, WJ 53 (1974) 211s-218s.

    Google Scholar 

  189. R. E. Jones, EFM 5 (1973) 107–117.

    Google Scholar 

  190. J. S. Pascover, M. Hill, and S. J. Matas, Fracture Toughness Testing and Its Applications, STP 381, American Society for Testing and Materials, Philadelphia (1965) 310–327.

    Google Scholar 

  191. T. W. Crooker and E. A. Lange, NRL Report 6805 (1968).

  192. G. J. Petrak, EFM 6 (1974) 725–733.

    Google Scholar 

  193. P. M. Thorby and W. G. Ferguson, MSE 22 (1976) 117–184.

    Google Scholar 

  194. Deleted.

  195. S. R. Novak, EFM 5 (1973) 727–763.

    Google Scholar 

  196. G. P. Cherepanov and H. Halmanov, EFM 6 (1974) 551–555.

    Google Scholar 

  197. G. Jolley, I. M. Kilpatrick, and R. Main, WJ 52 (1973) 543s-548s.

    Google Scholar 

  198. G. Birkbeck, A. E. Inckle, and G.W.J. Waldron, JMS 6 (1971) 319–323.

    Google Scholar 

  199. R. K. Pandey, J. D. Haridas, and S. Banerjee, EFM 6 (1974) 105–118.

    Google Scholar 

  200. G. R. Egan, EFM 5 (1973) 167–185.

    Google Scholar 

  201. D. A. Curry and J. F. Knott, MS 10 (1976) 1–6.

    Google Scholar 

  202. P.R.V. Evans, N. B. Owen, and L. N. McCartney, EFM 6 (1974) 183–193.

    Google Scholar 

  203. J. M. Hyzak and I. M. Bernstein, MT 7A (1976) 1217–1224.

    Google Scholar 

  204. A. Kochendoerfer, T. Sato, and K. E. Hagedorn, EFM 4 (1972) 665–674.

    Google Scholar 

  205. J. M. Barsom and S. T. Rolfe, EFM 2 (1971) 341–357.

    Google Scholar 

  206. S. D. Antolovich and D. Fahr, EFM 4 (1972) 133–144.

    Google Scholar 

  207. W. W. Gerberich, P. L. Hemmings, M. D. Mertz, and V. F. Zackay, TASM 61 (1968) 843–847.

    Google Scholar 

  208. L. R. Hettche and A. R. Cox, MT 3 (1972) 2327–2335.

    Google Scholar 

  209. J. A. Begley and P. R. Toolin, IJF 9 (1973) 243–253.

    Google Scholar 

  210. J. R. Barnby and I. S. Al-Daimalani, JMS 11 (1976) 1979–1988.

    Google Scholar 

  211. B. L. King and G. Wigmore, MT 7A (1976) 135–142.

    Google Scholar 

  212. J. F. Copeland, JPVT 98 (1976) 135–142.

    Google Scholar 

  213. P. H. Francis and D. L. Davidson, EFM 4 (1972) 617–635.

    Google Scholar 

  214. J. H. Devletian, J. R. Stephens, and W. R. Witzke, WJ 56 (1977) 97s-103s.

    Google Scholar 

  215. S. Jin, S. K. Hwang, and J. W. MorrisJr., MT 6A (1975) 1569–1575.

    Google Scholar 

  216. B. Z. Weiss, H. D. Steffens, and K. Seifert, WJ 51 (1972) 449s-456s.

    Google Scholar 

  217. B. Francis, MT 7A (1976) 465–468.

    Google Scholar 

  218. J. A. Kies, H. L. Smith, and H. E. Romine, MEQ 6 (November 1966) 37–47.

    Google Scholar 

  219. H. Taketani, EFM 4 (1972) 267–276.

    Google Scholar 

  220. J. A. Kies, H. L. Smith, H. E. Romine, and H. Berstein, Fracture Toughness Testing and Its Applications, STP 381, American Society for Testing and Materials, Philadelphia (1965) 328–356.

    Google Scholar 

  221. S. D. Antolovich, A. Saxena, and G. R. Chanani, MT 5 (1974) 623–632.

    Google Scholar 

  222. R. Brook and C. Musiol, MT 7A (1976) 683–687.

    Google Scholar 

  223. R. Brook and C. Musiol, MS 11 (1977) 131–135.

    Google Scholar 

  224. D. V. Thornton, EFM 2 (1970) 125–143.

    Google Scholar 

  225. S. P. Rawal and J. Gurland, MT 8A (1977) 691–698.

    Google Scholar 

  226. Anon., MP 111 (January 1977) 31–61.

  227. R. A. Clark and G. Thomas, MT 6A (1975) 969–979.

    Google Scholar 

  228. F. A. Heiser and R. W. Hertzberg, JBE 93 (1971) 211–217.

    Google Scholar 

  229. R. M. Horn, MT 6A (1975) 1525–1533.

    Google Scholar 

  230. T. J. Ladanyi, G. A. Meyers, R. M. Pilliar, and G. C. Weatherly, MT 6A (1975) 2037–2048.

    Google Scholar 

  231. C.-Y. Li, P. M. Talda, and R. P. Wei, IJF 3 (1967) 29–36.

    Google Scholar 

  232. A. J. Birkle, R. P. Wei, and G. E. Pellissier, TASM 59 (1966) 981–990.

    Google Scholar 

  233. W. A. Spitzig, TASM 61 (1968) 344–349.

    Google Scholar 

  234. R. Brook and P. S.Da Silva, IJF 12 (1976) 27–32.

    Google Scholar 

  235. P. T. Heald, T. C. Lindley, and C. E. Richards, MSE 10 (1972) 235–240.

    Google Scholar 

  236. J. M. Barsom, Pressure Vessels and Piping: Design and Analysis, A Decade of Progress, Materials and Fabrication 3 (1976) 186–207.

    Google Scholar 

  237. J. M. Barsom, Fatigue Crack Growth Under Spectrum Loads, STP 595, American Society for Testing and Materials, Philadelphia (1976) 217–235.

    Google Scholar 

  238. J. M. Barsom, JEI 93 (1971) 1190–1196.

    Google Scholar 

  239. K. N. Smith, M.El Haddad, and J. F. Martin, Journal Testing and Evaluation 5 (1977) 327–332.

    Google Scholar 

  240. R. J. Walter, NASA CR-120, 702 (1975).

  241. H. I. McHenry and A. W. Pense, Fatigue at Elevated Temperatures, STP 520, American Society for Testing and Materials, Philadelphia (1973) 345–354.

    Google Scholar 

  242. P. Shahinian, H. E. Watson, and J. R. Hawthorne, JEMT 96 (1974) 242–248.

    Google Scholar 

  243. D. F. Mowbray, W. R. Andrews, and A. J. Brothers, JEI 90 (1968) 648–655.

    Google Scholar 

  244. Y. Hara, J. Ueda, T. Okamoto, M. Ueda, and Y. Terada, 3rd International Conference on Pressure Vessel Technology, Part II, Tokyo, Japan (1977) 717–722.

  245. W. G. ClarkJr. and H. E. TroutJr., EFM 2 (1970) 107–123.

    Google Scholar 

  246. T. L. Gerber, J. D. Heald, and E. Kiss, JEMT 96 (1974) 255–260.

    Google Scholar 

  247. W. Seidl, 4th International Conference Fracture, Waterloo, Canada, 3 (1977) 601–608.

    Google Scholar 

  248. P. C. Paris, R. J. Bucci, E. T. Wessel, W. G. ClarkJr., and T. R. Mager, National Symposium on Fracture Mechanics, Part 1, Stress Analysis and Growth of Cracks, STP 513, American Society for Testing and Materials, Philadelphia (1972) 141–176.

    Google Scholar 

  249. R. J. Bucci, W. G. ClarkJr., and P. C. Paris, National Symposium on Fracture Mechanics, Part 1, Stress Analysis and Growth of Cracks, STP 513, American Society for Testing and Materials, Philadelphia (1972) 177–195.

    Google Scholar 

  250. M. Parry, H. Nordberg, and R. W. Hertzberg, WJ 51 (1972) 485s-490s.

    Google Scholar 

  251. A. M. Sullivan and T. W. Crooker, NRL Report 8004 (1976).

  252. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 75–20 (1975).

  253. C. M. Branco, J. C. Radon, and L. E. Culver, MS 10 (1976) 149–155.

    Google Scholar 

  254. P. C. Riccardella and T. R. Mager, National Symposium on Fracture Mechanics, Part 1, Stress Analysis and Growth of Cracks, STP 513, American Society for Testing and Materials, Philadelphia (1972) 260–279.

    Google Scholar 

  255. G. J. Spaeder, R. M. Brown, and W. J. Murphy, TASM 60 (1967) 418–425.

    Google Scholar 

  256. R. J. Bucci, B. N. Greene, and P. C. Paris, Progress in Flaw Growth and Fracture Toughness Testing, STP 536, American Society for Testing and Materials, Philadelphia (1973) 206–228.

    Google Scholar 

  257. R. O. Ritchie, MT 8A (1977) 1131–1140.

    Google Scholar 

  258. P. N. Thielen and M. E. Fine, MT 6A (1975) 2133–2141.

    Google Scholar 

  259. W. T. Matthews, F. I. Baratta, and G. W. Driscoll, IJF 7 (1971) 224–228.

    Google Scholar 

  260. E. P. Dahlberg, TASM 58 (1965) 46–53.

    Google Scholar 

  261. G. A. Miller, TASM 61 (1968) 442–448.

    Google Scholar 

  262. B.-Z. Weiss and M. R. Meyerson, TMS 242 (1968) 2515–2518.

    Google Scholar 

  263. B.-Z. Weiss and M. R. Meyerson, EFM 3 (1971) 475–491.

    Google Scholar 

  264. C. E. Richards and T. C. Lindley, EFM 4 (1972) 951–978.

    Google Scholar 

  265. D. H. Andreasen and F. H. Vitovec, MT 5 (1974) 1779–1783.

    Google Scholar 

  266. S. J. Hill and N. F. Boutle, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 1233–1238.

    Google Scholar 

  267. J. T. Barnby and R. Holder, IJF 12 (1976) 631–637.

    Google Scholar 

  268. S. J. Maddox, IJF 11 (1975) 221–243.

    Google Scholar 

  269. C. J. Beevers, MS 11 (1977) 362–367.

    Google Scholar 

  270. J. M. Barsom, E. J. Imhoff, and S. T. Rolfe, EFM 2 (1971) 301–317.

    Google Scholar 

  271. R. O. Ritchie, R. F. Smith, and J. F. Knott, MS 9 (1975) 485–492.

    Google Scholar 

  272. R. J. Cooke, P. E. Irving, G. S. Booth, and C. J. Beevers, EFM 7 (1975) 69–77.

    Google Scholar 

  273. P. E. Irving and L. N. McCartney, MS 11 (1977) 351–361.

    Google Scholar 

  274. G. Clark and J. F. Knott, MS 11 (1977) 345–350.

    Google Scholar 

  275. R. McLester, MS 11 (1977) 303–307.

    Google Scholar 

  276. L. Raymond, W. W. Gerberich, and C. F. Martin, TASM 58 (1965) 95–98.

    Google Scholar 

  277. T. W. Crooker and E. A. Lange, NRL Report 6944 (1969).

  278. T. W. Crooker, JEI 93 (1971) 893–896.

    Google Scholar 

  279. C. B. Harrison and G. M. Sandor, EFM 3 (1971) 403–420.

    Google Scholar 

  280. G. J. Patrak and J. P. Gallagher, JEMT 97 (1975) 206–213.

    Google Scholar 

  281. W. G. ClarkJr., and D. S. Kim, EFM 4 (1972) 499–510.

    Google Scholar 

  282. L. H. Burck and J. Weertman, MT 7A (1976) 257–264.

    Google Scholar 

  283. J. R. Griffiths, I. L. Mogford, and C. E. Richards, Metal Science Journal 5 (1971) 150–154.

    Google Scholar 

  284. D. E. Pettit and D. W. Hoeppner, EFM 5 (1973) 923–934.

    Google Scholar 

  285. M. Kinoshita, K. Kono, and K. Shingai, EFM 5 (1973) 563–584.

    Google Scholar 

  286. R. O. Ritchie and J. F. Knott, MSE 14 (1974) 7–14.

    Google Scholar 

  287. J. P. HickersonJr., and R. W. Hertzberg, MT 3 (1972) 179–189.

    Google Scholar 

  288. A. Plumbtree and V. P. Swaminathan, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 1239–1247.

    Google Scholar 

  289. L. A. James, WJ 52 (1973) 173s-179s.

    Google Scholar 

  290. O. Vosikovsky, JEMT 97 (1975) 298–304.

    Google Scholar 

  291. W. W. Gerberich and N. Moody, 4th International Conference Fracture, Waterloo, Canada, 3 (1977) 829–837.

    Google Scholar 

  292. G. T. Hahn, R. G. Hoagland, and A. R. Rosenfield, MT 3 (1972) 1189–1202.

    Google Scholar 

  293. A. M. Sullivan and T. W. Crooker, EFM 9 (1977) 159–166.

    Google Scholar 

  294. A. M. Sullivan and T. W. Crooker, NRL Report 7936 (1975).

  295. R. M. Horn, MT 6A (1975) 1525–1533.

    Google Scholar 

  296. W. G. ClarkJr., and S. J. HudakJr., Journal Testing and Evaluation 3 (1975) 454–476.

    Google Scholar 

  297. J. M. Barsom, EFM 3 (1971) 15–25.

    Google Scholar 

  298. W. A. Spitzig and R. P. Wei, EFM 1 (1970) 719–726.

    Google Scholar 

  299. C. J. Beevers, R. J. Cooke, J. F. Knott, and R. O. Ritchie, MS 9 (1975) 119–126.

    Google Scholar 

  300. S. Ikeda, T. Sakai, and M. E. Fine, JMS 12 (1977) 675–683.

    Google Scholar 

  301. R. A. Fournelle, E. A. Gray, and M. E. Fine, MT 7A (1976) 669–682.

    Google Scholar 

  302. R. C. Rice and R. I. Stephens, Progress in Flaw Growth and Fracture Toughness Testing, STP 536, American Society for Testing and Materials, Philadelphia (1973) 95–114.

    Google Scholar 

  303. F. J. Baroue and A. M. Hall, DMIC Memorandum 164 (1963).

  304. L. R. Hall and R. W. Finger, NASA CR-121,025 (1972).

  305. R. L. Tobler, R. P. Mikesell, R. L. Durcholz, C. W. Fowlkes, and R. P. Reed, Materials Research in Support of Superconducting Machinery, NBSIR 74–359 (1974) 296–423.

  306. G. G. Lessman, W. A. Logsdon, R. Kossowski, M. P. Mathur, and J. M. Wells, Materials Research in Support of Superconducting Machinery, NBSIR 74–359 (1974) 424–561.

  307. C. G. Chipperfield, IJF 12 (1976) 873–886.

    Google Scholar 

  308. W. A. Logsdon, EFM 7 (1975) 23–29.

    Google Scholar 

  309. J. M. Uchida, Boeing Commercial Airplane Division Document No. D6–23927 (1969).

  310. T. J. Bosworth and A. J. Zvanut, WJ 56 (1977) 159s-170s.

    Google Scholar 

  311. C. M. Hudson, NASA TN D-3151 (1965).

  312. T. L. Capeletti, I. E. DuPont de Nemours, Savannah River Laboratory, DP-MS-75–88 (1975) (Presented at 2nd International Conference on the Mechanical Behavior of Materials, Boston, August 16, 1976).

  313. B. Z. Weiss, H.-D. Steffens, K. Seifert, and E. S. Staskewitsch, WJ 54 (1975) 216s-225s.

    Google Scholar 

  314. H.-D. Steffens and H. Knosel, Symposium on Mechanical Behavior of Materials, Kyoto, Japan, 1 (1974) 293–305.

    Google Scholar 

  315. Deleted.

  316. R. T. Ault, R. B. Holtmann, and J. R. Myers, TASM 61 (1968) 75–84.

    Google Scholar 

  317. D. Webster, TASM 61 (1968) 816–828.

    Google Scholar 

  318. S. K. Chaudhuri and R. Brooke, IJF 12 (1973) 101–106.

    Google Scholar 

  319. G. C. Sih and A. T. Berman, IJF 9 (1973) 228–229.

    Google Scholar 

  320. C. Musiol and R. Brook, EFM 9 (1977) 379–387.

    Google Scholar 

  321. V. K. Rao, D.M.R. Taplin, and P. R. Rao, MT 6A (1975) 77–86.

    Google Scholar 

  322. C. M. Hudson, NASA TN D-2331 (1964).

  323. A. G. Pineau and R. M. Pelloux, MT 5 (1974) 1103–1112.

    Google Scholar 

  324. L. A. James, Atomic Energy Review 14 (1976) 37–86.

    Google Scholar 

  325. P. Shahinian, H. H. Smith, and H. E. Watson, Fatigue at Elevated Temperatures, STP 520, American Society for Testing and Materials, Philadelphia (1973) 387–400.

    Google Scholar 

  326. C. Bathias and R. M. Pelloux, MT 4 (1973) 1265–1273.

    Google Scholar 

  327. L. A. James, MT 5 (1974) 831–838.

    Google Scholar 

  328. L. A. James and R. L. Knecht, MT 6A (1975) 109–116.

    Google Scholar 

  329. D. T. Raske and C. F. Cheng, NT 34 (1977) 101–110.

    Google Scholar 

  330. A. W. Thompson, EFM 7 (1975) 61–68.

    Google Scholar 

  331. J. Wareing, MT 6A (1975) 1367–1377.

    Google Scholar 

  332. E. K. Priddle and C. Wiltshire, IJF 11 (1975) 697–700.

    Google Scholar 

  333. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 76–93 (1977).

  334. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 75–37 (1975).

  335. L. A. James, NT 16 (1972) 316–322.

    Google Scholar 

  336. J. Wareing, MT 6A (1975) 1367–1377.

    Google Scholar 

  337. A. C. Pickard, R. O. Ritchie, and J. F. Knott, Metals Technology 2 (1975) 253–263.

    Google Scholar 

  338. B. Mukherjee, 4th International Conference Fracture, Waterloo, Canada, 3 (1977) 609–615.

    Google Scholar 

  339. T. W. Crooker, D. F. Hasson, and G. R. Yoder, NRL Report 7910 (1975).

  340. L. A. James, NT 26 (1975) 46–53.

    Google Scholar 

  341. H. J. Rack, JEMT 97 (1975) 330–337.

    Google Scholar 

  342. Aerospace Structural Metals Handbook, AFML-TR-68–115, 3 (Revised to 1975).

  343. R. E. Curtis and W. F. Spurr, TASM 61 (1968) 115–127.

    Google Scholar 

  344. G. H. Heitman, J. E. Coyne, and R. P. Galipeau, MEQ 8 (August, 1968) 15–18.

    Google Scholar 

  345. J. C. Chesnutt, C. G. Rhodes, R. G. Berryman, F. H. Froes, and J. C. Williams, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 195–201.

    Google Scholar 

  346. M. G. Mendiratta, A. Chakrabartic, and J. A. Roberson, MT 5 (1974) 1949–1951.

    Google Scholar 

  347. J. C. Chesnutt, C. G. Rhodes, and J. C. Williams, Fractography-Microscopic Cracking Processes, STP 600, American Society for Testing and Materials, Philadelphia (1976) 99–138.

    Google Scholar 

  348. C. N. Freed, EFM 1 (1968) 175–189.

    Google Scholar 

  349. G. W. Kuhlman and F. R. Billman, MP 111 (March, 1977) 39–49.

    Google Scholar 

  350. K. R. Kondas, T. W. Crooker, and C. M. Gilmore, EFM 7 (1975) 641–647.

    Google Scholar 

  351. R. Chait, Journal Testing and Evaluation 4 (1976) 359–367.

    Google Scholar 

  352. J. B. Guernsey, V. C. Peterson, and F. H. Froes, MT 3 (1972) 339–340.

    Google Scholar 

  353. R.J.H. Wanhill, EFM 6 (1974) 681–697.

    Google Scholar 

  354. T. T. Shih and R. P. Wei, EFM 6 (1974) 19–32.

    Google Scholar 

  355. S. W. Hopkins, C. A. Rau, G. R. Leveraut, and A. Yuen, Fatigue Crack Growth Under Spectrum Loads, STP 595, American Society for Testing and Materials, Philadelphia (1976) 125–141.

    Google Scholar 

  356. G. R. Yoder, L. A. Cooley, and T. W. Crooker, NRL Report 8166 (1977).

  357. G. F. Pittinato, MT 3 (1972) 235–243.

    Google Scholar 

  358. C. M. Hudson, NASA TN D-3879 (1967).

  359. J. L. Robinson and C. J. Beevers, Metals Science Journal 7 (1973) 153–159.

    Google Scholar 

  360. A. W. Thompson, J. D. Frandsen, and J. C. Williams, MS 9 (1975) 46–48.

    Google Scholar 

  361. R. B. Scarlin, MSE 21 (1975) 139–147.

    Google Scholar 

  362. R. B. Scarlin, MT 7A (1976) 1535–1541.

    Google Scholar 

  363. Aerospace Structural Metals Handbook, AFML-TR-68–115, 4 (Revised to 1975).

  364. A. W. Thompson and H. J. Saxton, MT 4 (1973) 1599–1605.

    Google Scholar 

  365. M. I. Baskes, EFM 7 (1975) 249–251.

    Google Scholar 

  366. R. B. Scarlin, MSE 30 (1977) 55–64.

    Google Scholar 

  367. L. A. James, JEMT 96 (1974) 249–254.

    Google Scholar 

  368. A. M. Ermi, H. Nahm, and J. Moteff, MSE 30 (1977) 41–48.

    Google Scholar 

  369. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 76–43 (1976).

  370. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 77–2 (1977).

  371. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 75–80 (1975).

  372. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 76–39 (1976).

  373. A. Yuen and G. R. Leveraut, MT 7A (1976) 1443–1450.

    Google Scholar 

  374. C. A. RauJr., A. E. Gemma, and G. R. Leveraut, Fatigue at Elevated Temperatures, STP 520, American Society for Testing and Materials, Philadelphia (1973) 166–178.

    Google Scholar 

  375. J. Bartos and S. D. Antolovich, 4th International Conference Fracture, Waterloo, Canada, 2 (1977) 995–1005.

    Google Scholar 

  376. C. A. RauJr., and L. H. Burck, EFM 2 (1971) 211–222.

    Google Scholar 

  377. J. T. Barnby, E. A. Culpan, and D. M. Atherton, JMS 12 (1977) 1857–1861.

    Google Scholar 

  378. R. A. Yaske and J. Weertman, MT 5 (1974) 2033–2039.

    Google Scholar 

  379. R. Yaske and J. Weertman, MT 6A (1975) 1126–1127.

    Google Scholar 

  380. A. Saxena and S. D. Antolovich, MT 6A (1975) 1809–1828.

    Google Scholar 

  381. L. P. Pook and A. F. Greenan, EFM 5 (1973) 935–946.

    Google Scholar 

  382. H. Conrad, J. Hurd, and D. Woolard, Journal Testing and Evaluation 1 (1973) 88–99.

    Google Scholar 

  383. R. E. Cooper, Journal Testing and Evaluation 3 (1975) 87–92.

    Google Scholar 

  384. M. H. Jones, R. T. Bubsey, and W. F. BrownJr., Journal Testing and Evaluation 1 (1973) 100–109.

    Google Scholar 

  385. W. O. Shabbits, and W. A. Logsdon, Journal Testing and Evaluation 1 (1973) 110–118.

    Google Scholar 

  386. J. R. Coombe and R. P. Shogan, NAT 9 (1970) 396–401.

    Google Scholar 

  387. M. W. Perra and I. Finnie, JMS 12 (1977) 1519–1526.

    Google Scholar 

  388. T. A. Auten and J. E. Hanafee, submitted to MT (June 1976).

  389. T. J. Walker, NT 16 (1972) 509–520.

    Google Scholar 

  390. L. A. James and W. E. Anderson, EFM 1 (1969) 565–568.

    Google Scholar 

  391. L. A. James, Nuclear Applications 6 (1969) 307–312.

    Google Scholar 

  392. L. A. James, NAT 9 (1970) 260–267.

    Google Scholar 

  393. D. A. Ferrill, WJ 50 (1971) 206s, 230s, 234s.

  394. T. Ohmura, R. M. Pelloux, and N. J. Grant, EFM 5 (1973) 909–922.

    Google Scholar 

  395. S. Beitscher, EFM 8 (1976) 749–751.

    Google Scholar 

  396. N.J.I. Adams, 3rd International Conference Pressure Vessel Technology, Part II, Materials and Fabrication, Tokyo, Japan (1977) 685–694.

  397. H. D. Solomon, NT 29 (1976) 86–93.

    Google Scholar 

  398. M. Clavel, D. Fournier, and A. Pineau, MT 6A (1975) 2305–2307.

    Google Scholar 

  399. F. M. Boydon and G. Jolley MS 10 (1976) 282–285.

    Google Scholar 

  400. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 75–82 (1976).

  401. L. A. James, Hanford Engineering Development Laboratory, HEDL-TME 76–40 (1976).

Download references

Author information

Authors and Affiliations

  1. Langley Research Center, NASA, 23665, Hampton, Virginia, USA

    C. Michael Hudson & Sue K. Seward

Authors
  1. C. Michael Hudson
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sue K. Seward
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Hudson, C.M., Seward, S.K. A compendium of sources of fracture toughness and fatigue-crack growth data for metallic alloys. Int J Fract 14, R151–R184 (1978). https://doi.org/10.1007/BF00015997

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00015997

Keywords

Search

Navigation