Advertisement

Journal of Electrical Engineering & Technology

, Volume 14, Issue 1, pp 243–249 | Cite as

The Radial Magnetic Force Reduction Design for Vibration and Harmonic Impact Analysis

  • Byung-Kil Jun
  • Yong-Tae Kim
  • Byung-Jun Park
  • Gyu-Tak KimEmail author
Original Article
  • 2 Downloads

Abstract

In this paper, an improved model is designed through optimization process to reduce the radial magnetic force which is a vibration source. At this time, radial magnetic force is calculated by the magnetic flux component in the radial direction. This causes the vibration of the motor by applying a force to the stator side. It predicts whether the vibration of motor will be reduced through electromagnetic analysis and structural analysis. And the analysis results are verified by the vibration experiment.

Keywords

Motor vibration Radial magnetic force Resonance frequency Harmonic analysis 

Notes

Acknowledgements

This research was supported by Changwon National University in 2017–2018.

References

  1. 1.
    Kwon S, Lee J, Sun T, Hong J (2009) Characteristics and radial magnetic force of interior permanent magnet synchronous motor according to pole/slot combination. In: 2009 IEEE vehicle power and propulsion conference, pp 1491–1495Google Scholar
  2. 2.
    Lee W, Lee G, Jun B, Kim G (2016) Sharp design of IPM type BLDC motor for vibration reduction. Electr Mach Energy Convers Syst Soc Annual Conf J 3:161–164Google Scholar
  3. 3.
    Choi Hongsoon, Park Ilhan, Moon Wonkyu (2009) On the physical meaning of maxwell stress tensor. Trans Korean Inst Electr Eng 58(4):725–734Google Scholar
  4. 4.
    Baek S, Cho G, Kim GT (2017) The design of loss minimization of 600 W IPMSM by Quasi-Newton method. Korean Inst Electr Eng No.7 66:1053–1058Google Scholar
  5. 5.
    Jeong T, Lee K, Cho G, Kim G (2013) The design of radial magnetic force equilibrium for reduction of vibration and noise in IPM type BLDC motor. Electr Mach Energy Convers Syst Soc Annu Conf J 10:85–88Google Scholar
  6. 6.
    Yang B (2006) Vibration condition monitering and diagnostics of machines and installations. Intervision 4 25–33:374–375Google Scholar
  7. 7.
    Yang B (2002) Vibration of rotary machine. Intervision 11:65–69Google Scholar
  8. 8.
    Jang I-S et al (2014) Method for analyzing vibrations due to electromagnetic force in electric motors. IEEE Trans Magn 50(2):297–300CrossRefGoogle Scholar

Copyright information

© The Korean Institute of Electrical Engineers 2019

Authors and Affiliations

  • Byung-Kil Jun
    • 1
  • Yong-Tae Kim
    • 2
  • Byung-Jun Park
    • 3
  • Gyu-Tak Kim
    • 1
    Email author
  1. 1.Department of Electrical EngineeringChangwon National UniversityChangwon-siRepublic of Korea
  2. 2.S&T MotivBusan-siRepublic of Korea
  3. 3.Park Byung Jun Electric LabChangwon-siRepublic of Korea

Personalised recommendations