Advertisement

Fabrication and electrical properties of regenerated cellulose-loaded exfoliated graphene nanoplatelet composites

  • Joel Renaud Ngouanom GnidakouongEmail author
  • Xiaoyuan Gao
  • Abdullahil Kafy
  • Jaehwan Kim
  • Joo-Hyung KimEmail author
Original Article
First Online:
  • 10 Downloads

Abstract

Low cost and scalable manufacturing of highly doped cellulose for enhanced multifunctional applications is still an issue. In this work, eco-friendly nanocomposites were fabricated by incorporating regenerated cellulose (RC) of 10, 30, and 50 wt% into an exfoliated graphene nanoplatelets (GNPs), resulting in the intercalation of GnPs. The thermal and electrical properties of hybrid nanocomposites were investigated. The structural property was conducted through scanning electron microscope and X-ray diffraction analyses. Strong frequency-dependent dielectric response was found due to the change of the permittivity and the loss tangent of nanocomposites by different content of RC, which is associated with the polarizations behavior. Non-elastic relaxation at the GNPs–RC chains interfacial areas in an alternating field was identified as the main cause of polarization losses among others. Detailed ferroelectric measurements provided the evidence of the ideal resistive behavior of the nanocomposites, which are confirmed by the resistivity measurements along the out-of-plane direction of the nanocomposite sheets.

Keywords

Cellulose Exfoliated graphene nanoplatelets Dielectric property 
This is a preview of subscription content, log in to check access.

References

  1. 1.
    Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40(7):3941–3994Google Scholar
  2. 2.
    Zhang Y, Liu Y, Wang X, Sun Z, Ma J, Wu T et al (2014) Porous graphene oxide/carboxymethyl cellulose monoliths, with high metal ion adsorption. Carbohydr Polym 101:392–400Google Scholar
  3. 3.
    Luo H, Ao H, Li G, Li W, Xiong G, Zhu Y et al (2017) Bacterial cellulose/graphene oxide nanocomposite as a novel drug delivery system. Curr Appl Phys 17(2):249–254Google Scholar
  4. 4.
    Sadasivuni KK, Kafy A, Kim H-C, Ko H-U, Mun S, Kim J (2015) Reduced graphene oxide filled cellulose films for flexible temperature sensor application. Synth Met 206:154–161Google Scholar
  5. 5.
    Kafy A, Sadasivuni KK, Akther A, Min S-K, Kim J (2015) Cellulose/graphene nanocomposite as multifunctional electronic and solvent sensor material. Mater Lett 159:20–23Google Scholar
  6. 6.
    Kim J-H, Yun S, Ko H-U, Kim J (2013) A flexible paper transistor made with aligned single-walled carbon nanotube bonded cellulose composite. Curr Appl Phys 13(5):897–901Google Scholar
  7. 7.
    Hong G-W, Ramesh S, Kim J-H, Kim H-J, Lee H-S (2015) Synthesis and properties of cellulose-functionalized POSS-SiO2/TiO2 hybrid composites. J Nanosci Nanotechnol 15(10):8048–8054Google Scholar
  8. 8.
    Kim G-H, Ramesh S, Kim J-H, Jung D, Kim HS (2014) Cellulose-silica/gold nanomaterials for electronic applications. J Nanosci Nanotechnol 14(10):7495–7501Google Scholar
  9. 9.
    Zhang X, Liu X, Zheng W, Zhu J (2012) Regenerated cellulose/graphene nanocomposite films prepared in DMAC/LiCl solution. Carbohydr Polym 88(1):26–30Google Scholar
  10. 10.
    Luong ND, Pahimanolis N, Hippi U, Korhonen JT, Ruokolainen J, Johansson L-S et al (2011) Graphene/cellulose nanocomposite paper with high electrical and mechanical performances. J Mater Chem 21(36):13991Google Scholar
  11. 11.
    Grimes C, Mungle C, Kouzoudis D, Fang S, Eklund P (2000) The 500 MHz to 5.50 GHz complex permittivity spectra of single-wall carbon nanotube-loaded polymer composites. Chem Phys Lett 319(5):460–464Google Scholar
  12. 12.
    Shuba MV, Slepyan GY, Maksimenko SA, Hanson GW (2010) Radiofrequency field absorption by carbon nanotubes embedded in a conductive host. J Appl Phys 108(11):114302Google Scholar
  13. 13.
    Kafy A, Akther A, Zhai L, Kim HC, Kim J (2017) Porous cellulose/graphene oxide nanocomposite as flexible and renewable electrode material for supercapacitor. Synth Met 223:94–100Google Scholar
  14. 14.
    Sen I, Seki Y, Sarikanat M, Cetin L, Gurses BO, Ozdemir O et al (2015) Electroactive behavior of graphene nanoplatelets loaded cellulose composite actuators. Compos B Eng 69:369–377Google Scholar
  15. 15.
    de Moraes ACM, Andrade PF, de Faria AF, Simões MB, Salomão FCCS, Barros EB et al (2015) Fabrication of transparent and ultraviolet shielding composite films based on graphene oxide and cellulose acetate. Carbohydr Polym 123:217–227Google Scholar
  16. 16.
    Hu C, Song L, Zhang Z, Chen N, Feng Z, Qu L (2014) Tailored graphene systems for unconventional applications in energy conversion and storage devices. Energy Environ Sci 8(1):31–54Google Scholar
  17. 17.
    Gao K, Shao Z, Li J, Wang X, Peng X, Wang W et al (2013) Cellulose nanofiber–graphene all solid-state flexible supercapacitors. J Mater Chem A 1(1):63Google Scholar
  18. 18.
    Jeon GW, An J-E, Jeong YG (2012) High performance cellulose acetate propionate composites reinforced with exfoliated graphene. Compos B Eng 43(8):3412–3418Google Scholar
  19. 19.
    Huang L, Lu C, Wang F, Wang L (2014) Preparation of PVDF/graphene ferroelectric composite films by in situ reduction with hydrobromic acids and their properties. RSC Adv 4(85):45220–45229Google Scholar
  20. 20.
    Ataur Rahman M, Chung G-S (2013) Synthesis of PVDF-graphene nanocomposites and their properties. J Alloys Compd 581:724–730Google Scholar
  21. 21.
    Kafy A, Sadasivuni KK, Kim HC, Akther A, Kim J (2015) Designing flexible energy and memory storage materials using cellulose modified graphene oxide nanocomposites. Phys Chem Chem Phys 17(8):5923–5931Google Scholar
  22. 22.
    Ouyang W, Sun J, Memon J, Wang C, Geng J, Huang Y (2013) Scalable preparation of three-dimensional porous structures of reduced graphene oxide/cellulose composites and their application in supercapacitors. Carbon 62:501–509Google Scholar
  23. 23.
    Kim J, Yun S, Ounaies Z (2006) Discovery of cellulose as a smart material. Macromolecules 39(12):4202–4206Google Scholar
  24. 24.
    Sasidhar S, Thomas PS (2014) Polymer-ceramic nanocomposite dielectrics for advanced energy storage. In: Polymer composites for energy harvesting, conversion, and storage, Chapter 8, vol 1161. ACS Symposium Series, pp 165–190Google Scholar
  25. 25.
    Ray SC, Bhunia SK, Saha A, Jana NR (2015) Graphene oxide (GO)/reduced-GO and their composite with conducting polymer nanostructure thin films for non-volatile memory device. Microelectron Eng 146:48–52Google Scholar
  26. 26.
    Gross B, De Moraes R (1962) Polarization of the electret. J Chem Phys 37(4):710–713Google Scholar
  27. 27.
    Windmill JF, Zorab A, Bedwell DJ, Robert D (2008) Nanomechanical and electrical characterization of a new cellular electret sensor-actuator. Nanotechnology 19(3):035506Google Scholar
  28. 28.
    Yun G-Y, Kim J-H, Kim J (2009) Dielectric and polarization behaviour of cellulose electro-active paper (EAPap). J Phys D Appl Phys 42(8):082003Google Scholar
  29. 29.
    Tange A, Kim HS, Khaliq A, Sheeraz M, Kim IW (2018) Relaxor-type ferroelectric behavior of (1 − x)Bi0.5(Na0.78K0.22)0.5TiO3−xBi(Cu0.5Ti0.5)O3 lead-free piezoelectric ceramics. Sci Adv Mater. 10(2):262–266Google Scholar
  30. 30.
    Dimiev A, Zakhidov D, Genorio B, Oladimeji K, Crowgey B, Kempel L et al (2013) Permittivity of dielectric composite materials comprising graphene nanoribbons The effect of nanostructure. ACS Appl Mater Interfaces 5(15):7567–7573Google Scholar

Copyright information

© Korean Carbon Society 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringInha UniversityIncheonSouth Korea
  2. 2.Center for EAPap Actuator, Department of Mechanical EngineeringInha UniversityIncheonSouth Korea

Personalised recommendations

Cite article

Buy options