Advertisement

The Influence of a Continuous Mining Machine and Roof/Rib Mesh on Magnetic Proximity Detection Systems

  • Jingcheng LiEmail author
  • Jacob Carr
  • Chenming Zhou
  • Christopher C. Jobes
  • LaTasha R. Swanson
  • Jennica Bellanca
Review
  • 1 Downloads

Abstract

Magnetic proximity detection systems (PDSs) are used with continuous mining machines (CMMs) to protect miners from striking and pinning accidents. Generators are used in a PDS to create magnetic fields covering the space around a CMM. The PDS determines the proximity of a miner relative to the CMM based on the magnetic flux density detected by a miner-wearable component (MWC) and simultaneously alerts the miner and stops the motion of the CMM if the miner is within a proximity that creates a striking hazard. A stable magnetic field is essential to the accuracy of the proximity calculations performed by the PDS. This paper presents the results of a systematic study of the magnetic influence of two types of steel structures found near a CMM—the body of the CMM itself and the wire mesh used for roof and rib control. The results show that the steel of the CMM body can change the magnetic field distribution and also alter electrical parameters of a PDS by changing its generator current. The study also shows that, depending on the distance between the wire mesh and a generator, the magnetic field can also be altered.

Keywords

Magnetic distribution Proximity detection system Wire mesh 

Notes

Acknowledgments

The authors sincerely thank NIOSH technician, Mr. Jeffrey A. Yonkey. The authors are also thankful to NIOSH mechanical engineers, Mr. Peter Bissert and Mr. Joseph DuCarme, for their support and help in setting up the experimental system, and Mr. Adam Smith, Deputy Director of the Pittsburgh Mining Research Division, NIOSH, for their comments and suggestions during the course of this research.

Disclaimer

The findings and conclusions in this report are those of the authors and do not necessarily represent the official position of the National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention. Mention of any company or product does not constitute endorsement by NIOSH.

Compliance with Ethical Standards

Conflict of Interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Carr JL, Jobes CC, Li J, (2010) Development of a method to determine operator location using electromagnetic proximity detection. 2010 IEEE International Workshop on Robotic and Sensors Environments (ROSE). October 15–16, 2010. Phoenix, AZGoogle Scholar
  2. 2.
    Carr JL, Reyes MA, Matetic RJ, (2019) An analysis of mining injuries involving machinery and powered haulage from 2008 through 2017 and recommendations for future mining machine safety research. Annual Meeting of the Society of Mining Metallurgy and Exploration (SME), Denver, CO, February 24–27Google Scholar
  3. 3.
    Egbai JC (2011) Disturbing effect of a magnetic object on the absolute measurement of the magnetic field. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) 2(1):70–73MathSciNetGoogle Scholar
  4. 4.
    Jobes CC, Carr JL (2010) Development of an intelligent proximity detection system for continuous mining machine. Presentation in Proximity Warning Systems for Mining Equipment. Charleston, WV, Sept. 15, 2010, website: https://www.cdc.gov/niosh/mining/UserFiles/workshops/proximityworkshop2010/JobesCarr-NIOSH-PDWorkshop2010-508.pdf
  5. 5.
    Li J, Carr JL, Jobes CC (2012) A shell-based magnetic field model for magnetic proximity detection systems. Saf Sci 50(3):463–471CrossRefGoogle Scholar
  6. 6.
    Li J, Jobes CC, Carr JL (2013) Comparison of magnetic field distribution models for a magnetic proximity detection system. IEEE Transaction on Industry Applications (IAS), May/June 2013 49(3):1171–1176Google Scholar
  7. 7.
    Li J, Carr JL, Waynert JA, Kovalchik PG (2013) Environmental impact on the magnetic field distribution of a magnetic proximity detection system in an underground coal mine. Journal of Electromagnetic Waves and Applications (JEWA), 27(18):2416–2429Google Scholar
  8. 8.
    Li J, DuCarme J, Reyes M, Smith A (2018) Investigation of influence of a large steel plate on the magnetic field distribution of a proximity detection system. Min Eng 70(6):51–56CrossRefGoogle Scholar
  9. 9.
    Li J, Smith A, Carr J, Whisner B (2018) Influence of temperature on generator current and magnetic field of a proximity detection system. Reprints of the Annual Meeting of Society of the Mining, Metallurgy and Exploration (SME), Minneapolis MN, Feb 25–28, 2018Google Scholar
  10. 10.
    Madhaven P, Wiegmann DA, Lacson FC (2006) Automation failures on tasks easily performed by operators undermine trust in automated aids. Hum Factors 48(2) Summer 2006, pp. 241–256. Mine Safety and Health Administration, 2013, Approval & Certification Center, Proximity Detection Systems, https://arlweb.msha.gov/TECHSUPP/ACC/lists/18Prox.pdf
  11. 11.
    Metzger U, & Parasuraman R (2005) Automation in future air traffic management: effects of decision aid reliability on controller performance and mental workload. Hum Factors, 47(1), 35–49. 2005Google Scholar
  12. 12.
    Mine Safety and Health Administration, (2015) Department of Labor, Proximity Detection Systems for Continuous Mining Machines in Underground Coal Mines. Federal Register Vol. 80, No. 10. 30 CFR Part 75, MSHA-2010-0001Google Scholar
  13. 13.
    Parasuraman R, Riley V (1997) Humans and automation: use, misuse, disuse, abuse. Hum Factors 39(2):230–252Google Scholar
  14. 14.
    Schiffbauer WH (2002) Active proximity warning system for surface and underground mining applications. Mining Engineering, Dec. 01. 2002Google Scholar

Copyright information

© This is a U.S. government work and its text is not subject to copyright protection in the United States; however, its text may be subject to foreign copyright protection 2019

Authors and Affiliations

  • Jingcheng Li
    • 1
    Email author
  • Jacob Carr
    • 1
  • Chenming Zhou
    • 1
  • Christopher C. Jobes
    • 1
  • LaTasha R. Swanson
    • 1
  • Jennica Bellanca
    • 1
  1. 1.Pittsburgh Mining Research Divisionthe National Institute for Occupational Safety and HealthPittsburghUSA

Personalised recommendations