Advertisement

Usage of ZnO containing wastes in the sanitaryware bodies

  • Fazilet GungorEmail author
  • Iskender Isik
  • Ersin Gungor
  • Elif Eren Gültekin
Research
  • 14 Downloads

Abstract

Galvanized waste is characterized from a mineralogical point of view in order to investigate the effects of its utilization in sanitary ware bodies. Galvanized waste was added to a sanitary ware body recipe at 1–10% weight in place of albite and kaolin content. In an attempt to investigate the effects of its utilization on the firing temperature of the body, the bodies were sintered at the temperatures 1200 °C and 1250 °C. The physical properties, such as deformation, water absorption, and coloring parameters were investigated. The phase and microstructural development of the selected samples were characterized using XRD and SEM, respectively. Experimental studies have shown that the utilization of galvanized waste at an optimum level, in place of albite and kaolin in sanitary ware bodies sintered at 1200 °C, has similar water absorption (%), lower deformation, and higher whiteness values compared with standard sanitary ware bodies sintered at 1250 °C. It was foreseen that a 4.75% energy saving would be achieved by decreasing the firing temperature from 1250 to 1200 °C.

Keywords

Galvanized waste Energy saving ZnO Gahnite Sanitary ware Sintering 

References

  1. 1.
    Bright, M.A., Deem, N.J., Fryatt, J.: The advantages of recycling metallic zinc from the processing wastes of industrial molten zinc applications. In: The Minerals, Metals and Materials Society (ed.) 2007 TMS Annual Meeting & Exhibition, pp. 101–109, Orlando (2007)Google Scholar
  2. 2.
    Gordon, R.B., Graedel, T.E., Bertram, M., Fuse, K., Lifset, R., Rechberger, H., Spatari, S.: The characterization of technological zinc cycles. Resour Conserv Recycl. 39(2), 107–135 (2003)CrossRefGoogle Scholar
  3. 3.
    Perl, A.S.: Zinc oxide. Am Ceram Soc Bull. 80(8), 106–107 (2001)Google Scholar
  4. 4.
    Göncü, Y.: Investigation of the usage of wastes containing ZnO in crystal glazes. Master of Science Thesis, Anadolu University, Eskişehir (2006)Google Scholar
  5. 5.
    Karasu, B.: Macrostructure harmonie of various coloring oxides in soft porcelain zinc oxide crystal glazes. J Ceram Art Sci Tech Turkish Ceram Soc. 14, 33–35 (2001)Google Scholar
  6. 6.
    Karasu, B., Çakı, M., Turan, S.: The development and characterisation of zinc crystal glazes used for Amakusa-like soft porcelains. J Eur Ceram Soc. 20(12), 2225–2231 (2000)CrossRefGoogle Scholar
  7. 7.
    Karasu, B., Çakı, M., Yeşilbaş, Y.G.: The effect of albite wastes on glaze properties and microstructure of soft porcelain zinc crystal glazes. J Eur Ceram Soc. 21(8), 1131–1138 (2001)CrossRefGoogle Scholar
  8. 8.
    Karasu, B., Turan, S.: Effects of cobalt, copper, manganese and titanium oxide additions on the microstructures of zinc containing soft porcelain glazes. J Eur Ceram Soc. 22(9–10), 1447–1455 (2002)CrossRefGoogle Scholar
  9. 9.
    Öztürk, Z.B., Atay, B., Çakı, M., Ay, N.: An investigation of color development by means of the factorial design in wall tile glazes with ferrochromium fly ash. Indian J Eng Mater S. 22, 215–224 (2015)Google Scholar
  10. 10.
    Yıldız, B., Ozturk, Z.B., Kara, A.: Effects of alumina and white fused alumina addition on transparent wall and floor tile glazes. Acta Phys Pol A. 127, 1000–1004 (2015)Google Scholar
  11. 11.
    Tulyaganov, D.U., Agathopoulos, S., Fernandes, H.R., Ferreira, J.M.F.: The influence of incorporation of ZnO-containing glazes on the properties of hard porcelains. J Eur Ceram Soc. 27(2–3), 1665–1670 (2007)CrossRefGoogle Scholar
  12. 12.
    Mondal, A.: Effect of incorporation of ZnO containing glaze on the densification of porcelain. Indoceram. 48(2), 42–45 (2012)Google Scholar
  13. 13.
    Capoglu, A.: Elimination of discoloration in reformulated bone China bodies. J Eur Ceram Soc. 25(13), 3157–3164 (2005)CrossRefGoogle Scholar
  14. 14.
    Lee, S.-M., Kim, S.-K., Yoo, J.M., Kim, H.-T.: Crystallization behavior and mechanical properties of porcelain bodies containing zinc oxide additions. J Eur Ceram Soc. 25(11), 1829–1834 (2005)CrossRefGoogle Scholar
  15. 15.
    Eren, E.: Investigation of zinc oxide addition into a porcelain body. Master of Science Thesis, Anadolu University, Eskişehir (2006)Google Scholar
  16. 16.
  17. 17.
    Güngör, E., Işık, İ., Güngör, F.: A preliminary study for utilization of the galvanized wastes in the vitrified bodies. In: Karasu, B. (ed.) Proceedings of the 1st International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES’09), pp. 977–984. Ongar Electronic Print and Photocopy Center, Eskişehir (2009)Google Scholar
  18. 18.
    Conserva, L.R.D.S., Melchiades, F.G., Nastri, S., Boschi, A.O., Dondi, M., Guarini, G., Raimondo, M., Zanelli, C.: Pyroplastic deformation of porcelain stoneware tiles: wet vs. dry processing. J Eur Ceram Soc. 37(1), 333–342 (2017)CrossRefGoogle Scholar
  19. 19.
    Yekta, B.E., Marghussian, V.K.: Sintering of β. qss and gahnite glass ceramics. J Eur Ceram Soc. 19(16), 2963–2968 (1999)CrossRefGoogle Scholar
  20. 20.
    Güngör, F.: Investigation of pyroplastic deformation of whitewares: effect of crystal phases in the “CaO” based glassy matrix. Ceram Int. 44(11), 13360–13366 (2018)CrossRefGoogle Scholar
  21. 21.
    Tkalcec, E., Kurajica, S., Ivankovic, H.: Crystallization behavior and microstructure of powdered and bulk ZnO-Al2O3-SiO2 glass-ceramics. J Non-Cryst Solids. 351(2), 149–157 (2005)CrossRefGoogle Scholar
  22. 22.
    Richerson, D.W.: Modern Ceramic Engineering, Properties, Processing, and Use in Design. Taylor and Francis Group, Boca Raton, FL (2006)Google Scholar
  23. 23.
    Sharifzade, S., Clemmensen, L.H., Borggaard, C., Støier, S., Ersbøll, B.K.: Supervised feature selection for linear and non-linear regression of L*a*b* color from multispectral images of meat. Eng Appl Artif Intell. 27, 211–227 (2014)CrossRefGoogle Scholar
  24. 24.
    Tuncel, D.Y., Özel, E.: Evaluation of pyroplastic deformation in sanitaryware porcelain bodies. Ceram Int. 38(2), 1399–1407 (2012)CrossRefGoogle Scholar
  25. 25.
    Lee, W.E., Iqbal, Y.: Influence of mixing on mullite formation in porcelain. J Eur Ceram Soc. 21(14), 2583–2586 (2001)CrossRefGoogle Scholar

Copyright information

© Australian Ceramic Society 2019

Authors and Affiliations

  • Fazilet Gungor
    • 1
    Email author
  • Iskender Isik
    • 2
  • Ersin Gungor
    • 3
  • Elif Eren Gültekin
    • 4
  1. 1.Kütahya Porselen, R&D CenterKutahyaTurkey
  2. 2.Department of Ceramic EngineeringDumlupınar UniversityKutahyaTurkey
  3. 3.Hisarlar San. A.Ş.EskişehirTurkey
  4. 4.Department of Airframe and Powerplant MaintenanceSelçuk UniversityKonyaTurkey

Personalised recommendations