Advertisement

Improvement of nickel nanocomposite coatings by combining zinc-doped TiO2 nanoparticles

  • Funda Ak AzemEmail author
  • Tulay Koc Delice
Research
  • 14 Downloads

Abstract

Pure nickel and compound of nickel coatings (Ni-TiO2 and Ni-Zn/TiO2) were coated on the steel material using Watts bath with the electrodeposition conditions. Effect of the nanoparticle type and current density on the coating structure, surface morphology of the coating, hardness of the coating, and the corrosion properties of the coatings are presented. Phase and elemental analysis of the coatings were carried out by XRD and EDS techniques, respectively. SEM was used to investigate the surface morphology of the coatings, and Vickers microhardness values were measured to determine the hardness variation of the coatings. NaCl solution (3.5 wt%) was used to evaluate the corrosion properties of the coatings by the potentiodynamic polarization tests. Corrosion current density of 2.890 μA/cm2 for pure nickel coating was improved to 0.379 μA/cm2 by the coating of Zn-doped TiO2 nanoparticles at the 7A/dm2 current density. Microhardness of the Zn-doped TiO2 coating was improved compared to the pure Ni coating.

Keywords

Composite coatings Sol-gel processes Metal matrix composites Nanoparticles 

Notes

Funding information

The Scientific and Technological Research Council of Turkey (TUBITAK) and Dokuz Eylul University Department of Scientific Research Projects have supported this work with project numbers of 113R023 and 2014.KB.FEN.046, respectively.

Supplementary material

41779_2018_289_MOESM1_ESM.txt (1 kb)
ESM 1 (TXT 1 kb)

References

  1. 1.
    Sriharan, N., Muthukumarasamy, N., Senthil, T.: Preparation and characterization of Al2O3 doped TiO2 nanocomposites prepared from simple sol-gel method. Z. Phys. Chem. (2016).  https://doi.org/10.1515/zpch-2016-0774
  2. 2.
    Bełtowska-Lehman, E., Goral, A., Indyka, P.: Electrodeposition and characterization of Ni/Al2O3 nanocomposite coatings. Arch. Metall. Mater. (2011).  https://doi.org/10.2478/v10172-011-0101-1
  3. 3.
    Camargo, P.H.C., Satyanarayana, K.G., Wypych, F.: Nanocomposites: synthesis, structure, properties and new application opportunities. Mater. Res. (2009).  https://doi.org/10.1590/S1516-14392009000100002
  4. 4.
    Zygmuntowicz, J., Falkowski, P., Miazga, A., Konopka1, K.: Fabrication and characterization of ZrO2/Ni composites. J. Aust. Ceram. Soc. (2018).  https://doi.org/10.1007/s41779-018-0194-3
  5. 5.
    Kollia, C., Patta, C., Vassiliou, R., Kasselourf, V.: Ni/TiO2 composite electrocoatings. Rev. Metal. (2005).  https://doi.org/10.3989/revmetalm.2005.v41.iExtra.1030
  6. 6.
    Kartal, M., Buyukbayram, I., Alp, A., Akbulut, H.: Production of pulse electrodeposited Ni-TiC nanocomposite coatings. Mater. Today Proc. (2017).  https://doi.org/10.1016/j.matpr.2017.07.028
  7. 7.
    Fahami, A., Nasiri-Tabrizi, B., Rostami, M., Ebrahimi-Kahrizsangi, R.: Influence of surfactants on the characteristics of nickel matrix nanocomposite coatings. ISRN Electroc. (2013).  https://doi.org/10.1155/2013/486050
  8. 8.
    Ranjith, B., Kalaignan, G.P.: Ni-Co-TiO2 nanocomposite coating prepared by pulse and pulse reversal methods using acetate bath. Appl. Surf. Sci. (2010).  https://doi.org/10.1016/j.apsusc.2010.06.029
  9. 9.
    Rusu, D., Cojocaru, P., Magagnin, L., Gheorghies, C., Carac, G.: Study of Ni-TiO2 nanocomposite coating prepared by electrochemical deposition. J. Optoelectron. Adv. Mater. 12(12), 2419–2422 (2010).Google Scholar
  10. 10.
    Daniyan, A., Umoru, L., Popoola, A., Fayomi, O.: Comparative studies of microstructural, tribological and corrosion properties of Zn-TiO2 and Zn-TiO2-WO3 nano-composite coatings. Results Phys. (2017).  https://doi.org/10.1016/j.rinp.2017.08.048
  11. 11.
    Masoudi, M., Hashim, M., Kamari, H.M.: Characterization of novel Ni-Al2O3-SiC nanocomposite coatings synthesized by co-electrodeposition. Appl. Nanosci. (2014).  https://doi.org/10.1007/s13204-013-0250-9
  12. 12.
    Li, B., Zhang, W., Huan, Y., Dong, J.: Synthesis and characterization of Ni-B/Al2O3 nanocomposite coating by electrodeposition using trimethylamine borane as boron precursor. Surf. Coat. Technol. (2018).  https://doi.org/10.1016/j.surfcoat.2018.01.018
  13. 13.
    Jiang, S.W., Yang, L., Pang, J.N., Lin, H., Wang, Z.Q.: Electrodeposition of Ni-Al2O3 composite coatings with combined addition of SDS and HPB surfactants. Surf. Coat. Technol. (2016).  https://doi.org/10.1016/j.surfcoat.2015.12.028
  14. 14.
    Monteiro, O.R., Murugesan, S., Khabashesku, V.: Electroplated Ni-B films and Ni-B metal matrix diamond nanocomposite coatings. Surf. Coat. Technol. (2015).  https://doi.org/10.1016/j.surfcoat.2015.03.049
  15. 15.
    Raghav, G.R., Selvakumar, N., Jeyasubramanian, K., Thansekhar, M.R.: Corrosion analysis of copper-TiO2 nanocomposite coatings on steel using sputtering. Int. J. Innov. Res. Sci. Eng. Technol. 3(3), 1105–1110 (2014).Google Scholar
  16. 16.
    Abdel Aal, A.: Hard and corrosion resistant nanocomposite coating for Al alloy. Mater. Sci. Eng. A. (2008).  https://doi.org/10.1016/j.msea.2007.04.058
  17. 17.
    Zhou, M., Lin, W.-Y., Tacconi, N.R., Rajeshwar, K.: Metal/semiconductor electrocomposite photoelectrodes: behavior of Ni/TiO2 photoanodes and comparison of photoactivity of anatase and rutile modifications. J. Electroanal. Chem. 402, 221–224 (1996).Google Scholar
  18. 18.
    Baghery, P., Farzam, M., Mousavi, A., Hosseini, M.: Ni-TiO2 nanocomposite coating with high resistance to corrosion and wear. Surf. Coat. Technol. (2010).  https://doi.org/10.1016/j.surfcoat.2010.04.061
  19. 19.
    Gezici, L.U., Gül, B., Çavdar, U.: The mechanical and tribological characteristic of aluminium-titanium dioxide composites. Rev. Metal. (2018).  https://doi.org/10.3989/revmetalm.119
  20. 20.
    Zhang, Y., Yang, Y., Xiao, P., Zhang, X., Lu, L., Li, L.: Preparation of Ni nanoparticle-TiO2 nanotube composite by pulse electrodeposition. Mater. Lett. (2009).  https://doi.org/10.1016/j.matlet.2009.08.019
  21. 21.
    Zhang, Y., Wang, L., Liu, B., Zhai, J., Fan, H., Wang, D., Lin, Y., Xie, T.: Synthesis of Zn-doped TiO2 microspheres with enhanced photovoltaic performance and application for dye-sensitized solar cells. Electrochim. Acta. (2011).  https://doi.org/10.1016/j.electacta.2011.04.118
  22. 22.
    Reda, S.M., Khairy, M., Mousa, M.A.: Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process. Arab. J. Chem. (2017).  https://doi.org/10.1016/j.arabjc.2017.02.002
  23. 23.
    Ghaziof, S., Gao, W.: Mechanical and chemical properties of Zn-Ni-Al2O3 nanocomposite coatings. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Eng. 9(8), 997–1001 (2015).Google Scholar
  24. 24.
    Parida, G., Chaira, D., Chopkar, M., Basu, A.: Synthesis and characterization of Ni-TiO2 composite coatings by electro-co-deposition. Surf. Coat. Technol. (2011).  https://doi.org/10.1016/j.surfcoat.2011.04.102
  25. 25.
    Dardavila, M., Hamilakis, S., Loizos, Z., Kollia, C.: Ni/ZrO2 composite electrodeposition in the presence of coumarin: textural modifications and properties. J. Appl. Electrochem. (2015).  https://doi.org/10.1007/s10800-015-0804-5
  26. 26.
    Góral, A., Berent, K., Nowak, M., Kania, B.: Microstructure and properties of Ni and Ni/Al2O3 coatings electrodeposited at various current densities. Arch. Metall. Mater. (2016).  https://doi.org/10.1515/amm-2016-0001
  27. 27.
    Zhang, W., Li, B.: Influence of electrodeposition conditions on the microstructure and hardness of Ni-B/SiC nanocomposite coatings. Int. J. Electrochem. Sci. 13, (2018).  https://doi.org/10.20964/2018.04.28
  28. 28.
    Laszczyńska, A., Winiarski, J., Szczygieł, B., Szczygieł, I.: Electrodeposition and characterization of Ni-Mo-ZrO2 composite coatings. Appl. Surf. Sci. (2016).  https://doi.org/10.1016/j.apsusc.2016.02.086
  29. 29.
    Chen, X., Chen, C., Xiao, H., Cheng, F., Zhang, G., Yi, G.: Corrosion behavior of carbon nanotubes-Ni composite coating. Surf. Coat. Technol. (2005).  https://doi.org/10.1016/j.surfcoat.2004.04.055
  30. 30.
    Saha, R., Khan, T.: Effect of applied current on the electrodeposited Ni-Al2O3 composite coatings. Surf. Coat. Technol. (2010).  https://doi.org/10.1016/j.surfcoat.2010.08.035
  31. 31.
    Masoudi, M., Hashim, M., Kamari, H.M., Salit, M.S.: Fabrication and characterization of Ni-SiC-Cr nanocomposite coatings. Appl. Nanosci. (2013).  https://doi.org/10.1007/s13204-012-0136-2
  32. 32.
    Katamipour, A., Farzam, M., Danaee, I.: Effects of sonication on anticorrosive and mechanical properties of electrodeposited Ni-Zn-TiO2 nanocomposite coatings. Surf. Coat. Technol. (2014).  https://doi.org/10.1016/j.surfcoat.2014.06.043
  33. 33.
    Feng, Q., Li, T., Teng, H., Zhang, X., Zhang, Y., Liu, C., Jin, J.: Investigation on the corrosion and oxidation resistance of Ni-Al2O3 nano-composite coatings prepared by sediment co-deposition. Surf. Coat. Technol. (2008).  https://doi.org/10.1016/j.surfcoat.2008.03.001

Copyright information

© Australian Ceramic Society 2019

Authors and Affiliations

  1. 1.Department of Metallurgical and Materials EngineeringDokuz Eylul UniversityBucaTurkey
  2. 2.Department of Nanoscience and Nanoengineering, Institute of Applied Sciences and TechnologyDokuz Eylul UniversityBucaTurkey
  3. 3.The Graduate School of Natural and Applied SciencesDokuz Eylul UniversityBucaTurkey

Personalised recommendations