Advertisement

Nanofuel Droplet Evaporation Processes

  • Nwabueze G. Emekwuru
Review Article
  • 60 Downloads

Abstract

The concern about the level of toxic emissions from the use of fossil fuels in internal combustion engines is widely held. Several alternatives have been suggested to mitigate this concern including the use of biofuels in the engines, hybrid internal combustion–electric power systems and electric propulsion systems. In the last decade there has been progress with adding nano-sized particle additives to hydrocarbon fuels with the aim of improving the thermo-physical properties. The nano-sized metallic particles increase the surface-to-volume ratio of the resultant nanofuel suspensions. Reductions in the emissions levels from the combustion of these nanofuels have been reported; these improvements derive from the reductions in ignition delay, and therefore, higher burning rates arising from increases in the evaporation rates of the fuel droplets. Thus, droplet evaporation mechanisms influence the ignition time of the droplets, and consequently the ignition delay time. Optimizing these parameters can help to reduce the emissions from the internal combustion engines. The study presented here examines the up-to-date results of work carried out by various researchers on the droplet evaporation mechanisms of nanofuel droplets. The predominant processes presented as being responsible for the enhancement of the droplet evaporation rate are that the nanoparticle additives increase the droplet fuel temperature by radiative absorption, and that at high temperature values the agglomerates of the nanoparticles heat up residuals of the liquid fuel causing fuel droplet disruptions and micro-explosions. The various parameters that affect these and other nanofuel droplet evaporation mechanisms are presented. A case is made for further studies in this area.

Keywords

Atomization Droplet combustion Droplet disruption Droplet dry-out Droplet evaporation Droplet radiative absorption Energetic fuels Micro-explosion Nano-sized particles Nanofluids Nanofuels 

List of Symbols

Al

Aluminum

Al2O3

Aluminum oxide

B

Transfer number

CNP

Carbon nanoparticles

D, d

Droplet diameter, m

D0, d0

Initial droplet diameter, m

D1

Droplet diameter at the end of the heat-up phase, m

ICE

Internal combustion engine

K

Thermal conductivity, J/m s k

L

Latent heat of fuel vaporization, J/kg

MWCNT

Multiwalled carbon nanotubes

NP

Nanoparticle

P

Ambient pressure, kPa

PLR

Particle loading rate, wt%

T

Temperature, K

t

Time, s

wt%

Percentage by weight

cp

Specific heat at constant pressure, J/kg K

Greek Symbols

thu

Duration of the droplet evaporation heat-up period, s

tst

Duration of the droplet evaporation steady-state period, s

µ

Dynamic viscosity, kg/m s

λ

Evaporation constant, m2/s

λhu

Evaporation constant, m2/s

λst

Evaporation constant, m2/s

ρ

Density, kg/m3

Subscripts

st

Droplet evaporation steady-state period

hu

Droplet evaporation heat-up period

0

Initial value

s

Value at the fuel droplet surface

Ambient value

Notes

Acknowledgements

This work was supported by the University Grant Commission—UK India Education and Research Initiative CHAPNA project: UGC-UKIERI 2016-17-050.

References

  1. 1.
    Allen C, Lee T (2009) Energetic-nanoparticle enhanced combustion of liquid fuels in a rapid compression machine. In: 47th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition, p 227Google Scholar
  2. 2.
    Asibor J, Pandey K, Basu S, Emekwuru N (2018) Characterization of the spray cone angles of fuels with nanoparticle additives. In: ICLASS-2018, proceedings of the 14th triennial international conference on liquid atomization and spray systemsGoogle Scholar
  3. 3.
    Basu S, Miglani A (2016) Combustion and heat transfer characteristics of nanofluid fuel droplets: a short review. Int J Heat Mass Transf 96:482–503CrossRefGoogle Scholar
  4. 4.
    Bazyn T, Krier H, Glumac N (2006) Shock tube measurements of combustion of nano-aluminum. In: 44th AIAA aerospace sciences meeting and exhibit, p 1157Google Scholar
  5. 5.
    Chen RH, Phuoc TX, Martello D (2010) Effects of nanoparticles on nanofluid droplet evaporation. Int J Heat Mass Transf 53(19–20):3677–3682CrossRefGoogle Scholar
  6. 6.
    Chen RH, Phuoc TX, Martello D (2011) Surface tension of evaporating nanofluid droplets. Int J Heat Mass Transf 54(11–12):2459–2466CrossRefGoogle Scholar
  7. 7.
    DeLuca LT, Galfetti L, Severini F (2005) Combustion of composite solid propellants with nanosized aluminium. Combust Explos Shock Waves 41(6):680–692CrossRefGoogle Scholar
  8. 8.
    Faeth GM (1979) Current status of droplet and liquid combustion. In: Chigier NA (ed) Energy and combustion science. Pergamon, Oxford, pp 149–182CrossRefGoogle Scholar
  9. 9.
    Galfetti L, DeLuca LT, Severini F, Colombo G, Meda L, Marra G (2007) Pre and post-burning analysis of nano-aluminized solid rocket propellants. Aerosp Sci Technol 11(1):26–32CrossRefGoogle Scholar
  10. 10.
    Gan Y, Qiao L (2011) Evaporation characteristics of fuel droplets with the addition of nanoparticles under natural and forced convections. Int J Heat Mass Transf 54(23–24):4913–4922CrossRefGoogle Scholar
  11. 11.
    Gan Y, Qiao L (2012) Radiation-enhanced evaporation of ethanol fuel containing suspended metal nanoparticles. Int J Heat Mass Transf 55(21–22):5777–5782CrossRefGoogle Scholar
  12. 12.
    Gan Y, Qiao L (2012) Optical properties and radiation-enhanced evaporation of nanofluid fuels containing carbon-based nanostructures. Energy Fuels 26(7):4224–4230CrossRefGoogle Scholar
  13. 13.
    Gerken WJ, Thomas AV, Koratkar N, Oehlschlaeger MA (2014) Nanofluid pendant droplet evaporation: experiments and modeling. Int J Heat Mass Transf 74:263–268CrossRefGoogle Scholar
  14. 14.
    Godsave GAE (1953) Studies of the combustion of drops in a fuel spray—the burning of single drops of fuel. In: Symposium (international) on combustion, Elsevier, vol 4, no 1, pp 818–830CrossRefGoogle Scholar
  15. 15.
    Ivanov GV, Tepper F (1997) In: 4th International symposium on special topics in chemical propulsion, Begell House, New York, p 636Google Scholar
  16. 16.
    Javed I, Baek SW, Waheed K, Ali G, Cho SO (2013) Evaporation characteristics of kerosene droplets with dilute concentrations of ligand-protected aluminum nanoparticles at elevated temperatures. Combust Flame 160(12):2955–2963CrossRefGoogle Scholar
  17. 17.
    Javed I, Baek SW, Waheed K (2013) Evaporation characteristics of heptane droplets with the addition of aluminum nanoparticles at elevated temperatures. Combust Flame 160(1):170–183CrossRefGoogle Scholar
  18. 18.
    Javed I, Baek SW, Waheed K (2014) Effects of dense concentrations of aluminum nanoparticles on the evaporation behavior of kerosene droplet at elevated temperatures: the phenomenon of microexplosion. Exp Therm Fluid Sci 56:33–44CrossRefGoogle Scholar
  19. 19.
    Johnson C, Parr T, Hanson-Parr D, Hollins R, Fallis S, Higa K (2000) Combustion and oxidation of metal nanoparticles and composite particles. In: Proceedings of the 37th JANNAF combustion subcommittee meetingsGoogle Scholar
  20. 20.
    Kannaiyan K, Sadr R (2017) The effects of alumina nanoparticles as fuel additives on the spray characteristics of gas-to-liquid jet fuels. Exp Therm Fluid Sci 87:93–103CrossRefGoogle Scholar
  21. 21.
    Karmakar S, Som SK, Rao DCK (2018) Combustion of multi-component fuel droplets. Droplets and sprays. Springer, Singapore, pp 77–114Google Scholar
  22. 22.
    Khond VW, Kriplani VM (2016) Effect of nanofluid additives on performances and emissions of emulsified diesel and biodiesel fueled stationary CI engine: a comprehensive review. Renew Sustain Energy Rev 59:1338–1348CrossRefGoogle Scholar
  23. 23.
    Kuo KK, Luca LT (2002) Combustion of energetic materials. Begell House Publisher, DanburyGoogle Scholar
  24. 24.
    Kuo KK, Risha GA, Evans BJ, Boyer E (2003) Potential usage of energetic nano-sized powders for combustion and rocket propulsion. In: MRS proceedings, vol 800. Cambridge University Press, p AA1.1Google Scholar
  25. 25.
    Lefebvre AH, McDonell VG (2017) Atomization and sprays. CRC Press, Boca RatonCrossRefGoogle Scholar
  26. 26.
    Mench MM, Kuo KK, Yeh CL, Lu YC (1998) Comparison of thermal behavior of regular and ultra-fine aluminum powders (Alex) made from plasma explosion process. Combust Sci Technol 135(1–6):269–292CrossRefGoogle Scholar
  27. 27.
    Miglani A, Basu S (2015) Effect of particle concentration on shape deformation and secondary atomization characteristics of a burning nanotitania dispersion droplet. J Heat Transfer 137(10):102001CrossRefGoogle Scholar
  28. 28.
    Pantoya ML, Granier JJ (2005) Combustion behavior of highly energetic thermites: nano versus micron composites. Propellants Explos Pyrotech Int J Deal Sci Technol Asp Energ Mater 30(1):53–62CrossRefGoogle Scholar
  29. 29.
    Pathak B, Basu S (2016) Phenomenology of break-up modes in contact free externally heated nanoparticle laden fuel droplets. Phys Fluids 28(12):123302CrossRefGoogle Scholar
  30. 30.
    Pivkina A, Ulyanova P, Frolov Y, Zavyalov S, Schoonman J (2004) Nanomaterials for heterogeneous combustion. Propellants Explos Pyrotech Int J Deal Sci Technol Asp Energ Mater 29(1):39–48CrossRefGoogle Scholar
  31. 31.
    Rai A, Park K, Zhou L, Zachariah MR (2006) Understanding the mechanism of aluminium nanoparticle oxidation. Combust Theor Model 10(5):843–859CrossRefGoogle Scholar
  32. 32.
    Reid DL, Russo AE, Carro RV, Stephens MA, LePage AR, Spalding TC, Petersen EL, Seal S (2007) Nanoscale additives tailor energetic materials. Nano Lett 7(7):2157–2161CrossRefGoogle Scholar
  33. 33.
    Risha GA, Boyer E, Evans B, Kuo KK, Malek R (2003) Characterization of nano-sized particles for propulsion applications. In: MRS proceedings, vol 800. Cambridge University Press, p AA6.6Google Scholar
  34. 34.
    Rozenband VI, Vaganova NI (1992) A strength model of heterogeneous ignition of metal particles. Combust Explos Shock Waves 28(1):1–7CrossRefGoogle Scholar
  35. 35.
    Saxena V, Kumar N, Saxena VK (2017) A comprehensive review on combustion and stability aspects of metal nanoparticles and its additive effect on diesel and biodiesel fuelled CI engine. Renew Sustain Energy Rev 70:563–588CrossRefGoogle Scholar
  36. 36.
    Sazhin SS (2017) Modelling of fuel droplet heating and evaporation: recent results and unsolved problems. Fuel 196:69–101CrossRefGoogle Scholar
  37. 37.
    Sazhin SS, Rybdylova O, Pannala AS, Somavarapu S, Zaripov SK (2018) A new model for a drying droplet. Int J Heat Mass Transf 122:451–458CrossRefGoogle Scholar
  38. 38.
    Shaafi T, Sairam K, Gopinath A, Kumaresan G, Velraj R (2015) Effect of dispersion of various nanoadditives on the performance and emission characteristics of a CI engine fuelled with diesel, biodiesel and blends—a review. Renew Sustain Energy Rev 49:563–573CrossRefGoogle Scholar
  39. 39.
    Shin YJ, Shen YH (2007) Preparation of coal slurry with organic solvents. Chemosphere 68(2):389–393CrossRefGoogle Scholar
  40. 40.
    Tanvir S, Qiao L (2012) Surface tension of nanofluid-type fuels containing suspended nanomaterials. Nanoscale Res Lett 7(1):226CrossRefGoogle Scholar
  41. 41.
    Tanvir S, Qiao L (2016) Droplet burning rate enhancement of ethanol with the addition of graphite nanoparticles: influence of radiation absorption. Combust Flame 166:34–44CrossRefGoogle Scholar
  42. 42.
    Tanvir S, Biswas S, Qiao L (2017) Evaporation characteristics of ethanol droplets containing graphite nanoparticles under infrared radiation. Int J Heat Mass Transf 114:541–549CrossRefGoogle Scholar
  43. 43.
    Tyagi H, Phelan PE, Prasher R, Peck R, Lee T, Pacheco JR, Arentzen P (2008) Increased hot-plate ignition probability for nanoparticle-laden diesel fuel. Nano Lett 8(5):1410–1416CrossRefGoogle Scholar
  44. 44.
    Yoon J, Baek SW (2015) Droplet evaporation behavior of kerosene/nano‐aluminum fuels at high pressure environment. Int J Mater Mech Eng (IJMME) 4:44–49CrossRefGoogle Scholar

Copyright information

© Indian Institute of Science 2018

Authors and Affiliations

  1. 1.School of Mechanical, Aerospace and Automotive EngineeringCoventry UniversityCoventryUK

Personalised recommendations