Advertisement

Investigating the Effects of Copper Slag and Silica Fume on Durability, Strength, and Workability of Concrete

  • Ravanbakhsh ShirdamEmail author
  • Mahdiyeh Amini
  • Nematollah Bakhshi
Research paper
  • 1 Downloads

Abstract

Workability, strength, durability, economic considerations, and attention to sustainable development issues are some crucial factors in designing an appropriate mix. The use of copper slag as a partial replacement of cement is an effective method of pollution reduction and conservation of resources, since it reduces cement use. In addition, silica fume is used in combination with copper slag to make concrete structures more durable. The main purpose of this study was optimizing important variables of concrete mix design including cement factor, water-to-binder ratio (w/b), copper slag, and silica fume to improve concrete durability. To achieve this goal, an experimental research was carried out, based on standards, to optimize changes in the said fields. Concrete durability is determined by experiments considering electrical resistance of concrete, bulk electrical conductivity, and chloride migration coefficient. Interfacial transition zone and cement microstructure were evaluated using X-ray analysis and scanning electron microscopy. The results of this research indicated that simultaneous use of copper slag and silica fume with appropriate values of other factors (cement factor and w/b ratio) yields a more durable, workable and strengthened mix design. The optimized mix introduced a workable, durable, resistant, and economical mix design with 7% and 20% of cement replaced with silica fume and copper slag, respectively. This innovative study included simultaneous use of copper slag and silica fume as a replacement for cement.

Keywords

Copper slag Silica fume Permeability Durability Strength Workability 

References

  1. Al-Jabri KS, Taha RA, Al-Hashmi A, Al-Harthy AS (2006) Effect of copper slag and cement by-pass dust addition on mechanical properties of concrete. Constr Build Mater 20(5):322–331.  https://doi.org/10.1016/j.conbuildmat.2005.01.020 CrossRefGoogle Scholar
  2. American Society for Testing and Materials, C1760-12 (2012) Standard test method for bulk electrical conductivity of hardened concreteGoogle Scholar
  3. American Society for Testing and Materials, C 39/C39M (1999) Standard test method for compressive strength of cylindrical concrete specimensGoogle Scholar
  4. American Society for Testing and Materials, C 618-03 (2008) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concreteGoogle Scholar
  5. American Society for Testing and Materials, C143/C143M-15 (2015) Standard test method for slump of hydraulic-cement concreteGoogle Scholar
  6. American Society for Testing and Materials, C150 (2012) Standard specification for physical and chemical requirement for portland cement IIGoogle Scholar
  7. Anbarasan A, Venkatesan M (2015) Strength characteristics and durability characteristics of silicafume and metakaolin based concrete. Int J Innov Eng Technol (IJIET), 1–7. http://ijiet.com/wp-content/uploads/2015/02/1.pdf
  8. Azari MM, Mangat ES, Tu SC (1993) Chloride ingress in microsilica concrete. Cement Concr Compos 15:215–221.  https://doi.org/10.1016/0958-9465(93)90024-4 CrossRefGoogle Scholar
  9. Brindha D, Nagan S, (2010) Durability studies on copper slag admixed concrete. Asian J Civ Eng (Building and Housing) 12(5):563–578. https://www.researchgate.net/publication/268438151
  10. British Standard Institution, BS 1881-122 (2011) Method for determination of water absorptionGoogle Scholar
  11. Edwin RS, Schepper MD, Gruyaert E, Belie ND (2016) Effect of secondary copper slag as cementitious material in ultra-high performance mortar. Constr Build Mater 119:31–44.  https://doi.org/10.1016/j.conbuildmat.2016.05.007 CrossRefGoogle Scholar
  12. Gao Y, Schutter GD, Ye G, Tan Z, Wu K (2014) The ITZ microstructure, thickness and porosity in blended cementitious composite: effects of curing age, water to binder ratio and aggregate content. Compos Part B 60:1–13.  https://doi.org/10.1016/j.compositesb.2013.12.021 CrossRefGoogle Scholar
  13. Geetha S, Madhavan S (2017) High performance concrete with copper slag for marine environment. Mater Today Proc 4(2, Part A):3525–3533. https://www.sciencedirect.com/science/article/pii/S2214785317304534
  14. Kumar Mehta P, Monteiro DJM (2002) Concrete microstructure, properties, and materials. University of California Berkeley, Berkeley.  https://doi.org/10.1036/0071462899 Google Scholar
  15. Liu J, Tang K, Qiu Q, Pan D, Lei Z, Xing F (2014) Experimental investigation on pore structure characterization of concrete exposed to water and chlorides. Materials 7:6646–6659.  https://doi.org/10.3390/ma7096646 CrossRefGoogle Scholar
  16. Mohsenian H, Sohrabi MR (2011) Copper slag and pozzolan effect of Taftan in the water absorption of hardened concrete. In: The national conference in non-osmosis concrete, water storage tanks, Gilan Province. https://www.civilica.com/Paper-NCNOCWST01-NCNOCWST01_002.html
  17. Najimi M, Sobhani J, Pourkhorshidi AR (2011) Durability of copper slag contained concrete exposed to sulfate attack. Constr Build Mater 25(4):1895–1905.  https://doi.org/10.1016/j.conbuildmat.2010.11.067 CrossRefGoogle Scholar
  18. Nazer Amin S, Pavez O, Freddy R (2012) Use of copper slag in cement mortar. Rem Rev Esc Minas.  https://doi.org/10.1590/S0370-44672012000100012 Google Scholar
  19. NT Build 492 (2011) Chloride migration coefficient from non-steady-state migration experimentsGoogle Scholar
  20. Onuaguluchi O, Eren Ö (2012) Cement mixtures containing copper tailings as an additive: durability properties. Mater Res.  https://doi.org/10.1590/S1516-14392012005000129 Google Scholar
  21. Parhizkar T, Najimi M, Pourkhorshidi AR, Jafarpour F, Hillemeier B, Herr R (2010) Proposing a new approach for qualification of natural pozzolans. Trans A Civ Eng 17(6):450–456. https://www.sid.ir/En/Journal/ViewPaper.aspx?ID=186566
  22. Pilvar A, Ramezanianpour AA, Rajaie H (2018) Modified electrical conductivity test method for evaluation of concrete permeability. J Ferdowsi Civ Eng.  https://doi.org/10.12989/cac.2015.16.6.865 Google Scholar
  23. Raveendran KG, Rameshkumar V, Saravanan M, Kanmani P, Sudhakar S (2015) Performance of silica fume on strength and durability of concrete. Int J Innov Res Sci Eng Technol 4(10):2319–8753. http://www.ijirset.com/upload/2015/october/65_22_Performance
  24. Shi C, Meyer C, Behnood A (2008) Utilization of copper slag in cement and concrete. Resour Conserv Recycl 52:1115–1120.  https://doi.org/10.1016/j.resconrec.2008.06.008 CrossRefGoogle Scholar
  25. Sobhani J, Najim M, Purkhorshidi A, Ahmadi B (2012) Determine the impedance spectrum and provide electrical circuit Tuesday and binary equivalent for concrete containing natural zeolite and copper slag, concrete. In: 4th national conference on concrete, Tehran. https://www.civilica.com/Paper-NCCICI04-NCCICI04_097.html
  26. Taher Shamsy A, Otarodi S, Nazarzadeh A (2011) To investigate the feasibility of using copper slag in the production of high strength concrete to reduce the environmental impact of the disposal of industrial waste. In: The sixth national congress on civil engineering, Semnan. https://www.civilica.com/Paper-NCCE06-NCCE06_1092.html
  27. Trigo APM, Liborio JBL (2014) Doping technique in the interfacial transition zone between paste and lateritic aggregate for the production of structural concretes. Mater Res.  https://doi.org/10.1590/S1516-14392013005000169 Google Scholar
  28. Wang D, Zhou X, Meng Y, Chen Z (2017) Durability of concrete containing fly ash and silica fume against combined freezing-thawing and sulfate attack. Constr Build Mater 147:398–406. https://www.sciencedirect.com/science/article/abs/pii/S0950061817308309
  29. Yoo J, Oh B, Park S, Kim S (2010) Chloride penetration resistance properties of concrete containing mineral admixtures. In: Oh BH et al (eds) Proceeding of fracture mechanics of concrete and concrete structures assessment. Durability, monitoring and retrofitting of concrete structures. Korea Concrete Institute, Seoul, pp 1008–1016. http://framcos.org/FraMCoS-7/08-05.pdf

Copyright information

© University of Tehran 2019

Authors and Affiliations

  • Ravanbakhsh Shirdam
    • 1
    Email author
  • Mahdiyeh Amini
    • 1
  • Nematollah Bakhshi
    • 2
  1. 1.Department of Environmental EngineeringCollege of EnvironmentKarajIran
  2. 2.Mineral Industries Research CenterShahid Bahonar University of KermanKermanIran

Personalised recommendations