Advertisement

Mixed Centroid Method for Spaceborne Laser Altimeter Calibration

  • Jing ZhangEmail author
  • Jiajun Wang
  • Liu Sang
  • Yunsong Li
Article
  • 20 Downloads

Abstract

The on-orbit calibration of spaceborne laser altimeters is based on traditional geometric calibration in which the laser pointing angle error is the primary evaluation index. This study proposes a mixed centroid method for calculating the laser footprint center by using the geometric center of each energy level eliminating the abnormal energy level points, inverting the laser energy level distribution, and correcting the true footprint. Then, the mixed centroid method is compared with the traditional geometric center method and the centroid method. Simulation comparisons demonstrate that the proposed method offers high precision and low calibration cost, thereby improving the calibration accuracy of the target. The proposed method provides a reference algorithm for the ground field calibration of the next generation of high-resolution mapping satellites in China.

Keywords

Calibration Pointing angle error Geometric center method Centroid method Mixed centroid method 

Notes

Conflict of Interest

The authors declare that they have no conflict of interest.

Ethical Approval

All authors have participated in approval of the final version.

Informed Consent

This manuscript has not been submitted to, nor is under review at, another journal or other publishing venue.

Funding Information

This work is supported in part by the National Nature Science Foundation of China under Grant No. 61571345, Yangtze River Scholar Bonus Schemes and Ten Thousand Talent Program.

Compliance with Ethical Standards

All authors have participated in (a) conception and design, or analysis and interpretation of the data, and (b) drafting the article or revising it critically for important intellectual content.

References

  1. Cheng BH (2017) Satellite remote sensing digital orthophoto map (DOM) production and application. Science and technology innovation 29:139–140Google Scholar
  2. Guan B, Sun ZM, Xiaogan) et al. (2017). The relative scale of the altimeter in the satellite altimetry mode of the binary star flying formation. J Surv Mapp, 46 (1):44–52.Google Scholar
  3. Jiang Y, Fang L, Hou JH (2018) Discussion on quality assessment method of digital surface models. Jingwei world 01:72–77Google Scholar
  4. Li SN (2017) On-orbit geometric calibration of spaceborne laser geodesy altimetry system: 99-100.Google Scholar
  5. Li J, Feng L, Pang XP (2017) Comparison of two kinds of cross-calibration methods based on image and radiance transfer model for. GF–1 remote sensing image 46(7):882–890Google Scholar
  6. Liang DY (2014) Application of laser altimeter improve mapping accuracy satellite positioning. Spacecraft Engineering 23(6):17–23Google Scholar
  7. Luo Y (2019) Overview of the development and application prospects of digital elevation models. Chemical management 09:21Google Scholar
  8. Magruder L A (2001) Pointing angle and timing verification of the geoscience laser altimeter using a ground-based detection system. Texas:University of Texas:14–39.Google Scholar
  9. Niu R, Wang Y, Wang JR (2011) Prediction and simulation of uncontrolled positioning performance of aerospace dual line array camera. Journal of Surveying and Mapping Science and Technology 28(5):351–355Google Scholar
  10. Tang XM, Li GY, Gao XM (2016) Construction of satellite laser height measurement and preliminary verification of accuracy. J Surv Mapp 45(10):1182–1191Google Scholar
  11. Wang RX (2014) Thoughts on 1:10000 Transmission Photogrammetry Satellite Technology. Space return and remote sensing 35(2):1–5Google Scholar
  12. Wang LY, Yu PY (2018) Acquisition and basic application of 3D digital terrain model. Architectural skills 06:97–99Google Scholar
  13. Wang Y, Ai Y, Lv Y (2017a) Error analysis of spaceborne laser height measurement system. Surveying Science and Engineering 37(6):27–35Google Scholar
  14. Wang M, Cheng YF, Chang XL et al (2017b) High-precision on-orbit geometric calibration of high-scoring geostationary orbit satellites. J Surv Mapp 46(1):53–61Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Xidian UniversityShaanxiChina

Personalised recommendations