Advertisement

Alignment technology of heavy ion medical machine

  • Wenjun Chen
  • Yaqing Yang
  • Guozhu Cai
  • Zhiguo Cui
  • Xiaorong Zhu
  • Shaoming Wang
Original Paper
  • 9 Downloads

Abstract

Background

Heavy ion medical machine (HIMM) is built by the Institute of Modern Physics, Chinese Academy of Sciences, with a high-energy beam transport line with a height of 18 m, and its complex space mounting structure increases the difficulty of installation and alignment.

Purpose

The aim of this paper is to provide methods to install all accelerator components efficiently and to ensure that the alignment accuracies of all installed components are within the designed values.

Methods

We accomplished the fiducialization and pre-alignment of complex modules by combining the laser tracker and the alignment telescope. By analyzing various elements that affect the accuracy of alignment, a method of alignment for high-energy beam transport line was proposed based on high-precision three-dimensional control network.

Results

All components have been installed and aligned in a short time, alignment position accuracy of magnets is less than 0.1 mm, and the treatment components alignment accuracy is no more than 0.4 mm.

Conclusions

On the basis of error analysis, all alignment results are better than the required precisions, and all of these guaranteed the successful operation of HIMM.

Keywords

Heavy ion accelerator Three-dimensional control network Laser tracker Alignment Fiducialization 

References

  1. 1.
    W.J. Chen, L.Z. Ma, G.Z. Cai et al., Alignment and installation of high energy beam-line for Wuwei heavy ion medical machine. High Power Laser Part. Beams 28(8), 085101-058105 (2015). (in Chinese) Google Scholar
  2. 2.
    W.J. Chen, K.D. Man, S.M. Wang et al., Survey and alignment technology of Lanzhou heavy ion research facility. Nucl. Tech. 33(1), 65–68 (2010). (in Chinese) Google Scholar
  3. 3.
    C.H. Yu. Ph.D. thesis, Shanghai Institute of Applied Physics. CAS (2008)Google Scholar
  4. 4.
    G.Z. Cai, W.J. Chen, K.D. Man et al., Using the target accelerator magnet alignment installation positioning solution. Sci. Surv. Mapp. 25(1), 82–87 (2013). (in Chinese) ADSGoogle Scholar
  5. 5.
    G.Z. Cai, W.J. Chen, K.D. Man et al., Application of laser tracker and SA software in large particle accelerators in collimating measurement. Sci. Surv. Mapp. 38(4), 162–164 (2013). (in Chinese) Google Scholar
  6. 6.
    Y.X. Kong, Control and measurement (Wuhan University Press, Wuhan, 1996), pp. 65–66Google Scholar
  7. 7.
    D.Y. Wang, X.L. Zhang, Q. Ma et al., Procrustes method in coordinate transformation on multi-station of large-scale measurement. Opt. Precis. Eng. 22(4), 949–955 (2014).  https://doi.org/10.3788/OPE.20142204.0949. (in Chinese) CrossRefGoogle Scholar
  8. 8.
    C.H. Yu, L.X. Yin, H.W. Du et al., Alignment and survey design of Shanghai light source. High Power Laser Part. Beams. 18(7), 1167–1172 (2008). (in Chinese) Google Scholar
  9. 9.
    W.J. Chen, L.Z. Ma, G.Z. Cai et al., Survey and Alignment of synchrotron ring for Wuwei Heavy Ion Medical machine. Nucl. Phys. Rev. 33(3), 297–301 (2015). (in Chinese) Google Scholar
  10. 10.
    Y.T. Fei, Error theory and data processing (Mechanical Industry Press, Wuhan, 2010), p. 102Google Scholar

Copyright information

© Institute of High Energy Physics, Chinese Academy of Sciences; Nuclear Electronics and Nuclear Detection Society 2019

Authors and Affiliations

  1. 1.Institute of Modern PhysicsChinese Academy of SciencesLanzhouChina
  2. 2.University of Chinese Academy of SciencesBeijingChina
  3. 3.Huizhou Research Center of Ion ScienceHuizhouChina

Personalised recommendations