Distortion Optimisation through Welding Simulation
- 47 Downloads
Although they have already been in use for decades, welding processes are still some of the most mathematically complex methods that can be described. The reason for this is the localised heat input, with its very short heating and cooling periods and the related effects on the mechanical and metallurgical properties in the fusion zone. Thanks to the availability of high-power computers, numerical computer programs make it possible for the thermo-mechanical properties of welded structures to be reproduced in numerical simulations. To demonstrate the applicability of structural welding simulation for the purpose of optimising distortion, Simufact Engineering and Edag Engineering Schweiz worked together on a project aimed at calculating the problem of distortion in a special coupling jaw cross member of a heavy-duty tractor unit.
Challenges of Thermal Joining in Vehicle Construction
In vehicle construction, welding is an established joining method for body and structural parts....
KeywordsWelding Fusion Zone Weld Seam Outer Face Welding Distortion
- Wu, J.; Powell, R.; Hermetet, A.; Shue, C.; Gangel, S.: Total Noise Analysis of a Directional Drill. NoiseCon-16 Conference, Providence, 2016Google Scholar
- Pérot, F.; Freed, D.; Mann, A.: Acoustic absorption of porous materials using LBM. 19th AIAA/CEAS Aeroacoustics Conference, Berlin, 2013Google Scholar
- Brès, G.; Pérot, F.; Freed, D.: A Ffowcs Williams-Hawkings Solver for Lattice-Boltzmann Based Computational Aeroacoustics. 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, 2010Google Scholar
- Pérot, F.; Kim, M. S.; Moreau, S.; Henner, M.; Neal, D.: Direct Aeroacoustics Prediction of a Low Speed Axial Fan. 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, 2010Google Scholar
- Piellard, M.; Coutty, B.; Le Goff, V.; Vidal, V.; Pérot, F.: Direct aeroacoustics simulation of automotive engine cooling fan system: effect of upstream geometry on broadband noise. 20th AIAA/CEAS Aeroacoustics Conference, Atlanta, 2014Google Scholar
- Hallqvist, T.: The Cooling Airflow of Heavy Trucks - A Parametric Study. 2008 SAE World Congress, Detroit, 2008Google Scholar
- Bhatnagar, B.; Schlesinger, D.; Alajbegovic, A.; Beedy, J.; Horrigan, K.; Sarrazin, F.; Xu, B.: Simulation of Class 8 Truck Cooling System: Comparison to Experiment under Different Engine Operation Conditions. SAE paper 2007-01-4111Google Scholar