Advertisement

ATZoffhighway worldwide

, Volume 9, Issue 1, pp 54–57 | Cite as

Connectivity and 3-D Technologies for the Future Digital Enterprise

  • Andreas Rüdenauer
  • Julien Kipp
  • Martin Scherer
  • Bernhard Jahnke
Simulation
  • 16 Downloads

An immersive experience of virtual mobile machines, nowadays requires a 3-D room, commonly known as CAVE. Due to enormous investment costs and restrictions of the 3-D experience during group sessions, the market penetration of such technology is still limited to large corporations and few universities. As a spin-off of the Chair of Mobile Machines of Karlsruhe Institute of Technology, Rüdenauer 3D Technology provides a solution to enable immersive 3-D product experience at low costs for an accelerated digitalisation of today’s industry. In the future, mobile machines can be experienced, tested and manufactured virtually via the CrossConnected HoloDeck at real-time boundary conditions. Holodeck allows for synchronised, site independent collaboration of remote engineering teams.

Challenges of Product Development

The market success of a product can like any typical project be measured by means of the dimensions of success of the magic triangle, which describes the quality, cost and...

Keywords

Product Development Product Life Cycle Original Equipment Manufacturer Virtual Assembly Virtual Scene 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. [1]
    Christophers, M.: Entwicklung eines Vorgehensmodells für die unternehmensübergreifende, virtuelle Produktentwicklung. FAST, Karlsruher Institut für Technologie, Masterarbeit, Supervisors: Rüdenauer, A.; Geimer, M., Karlsruhe, 2014Google Scholar
  2. [2]
    Schäppi, B.: Handbuch Produktentwicklung. München, Wien: Carl Hanser, 2005Google Scholar
  3. [3]
    Fraunhofer-Institut für Systemtechnik und Innovationsforschung (ISI): Untersuchung über die Zukunft der Produktion in Deutschland. Karlsruhe: Fraunhofer ISI, 2003Google Scholar
  4. [4]
    Lu, S. C-Y.: A scientific foundation of collaborative engineering. CIRP Annals — Manufacturing Technology, Volume 49Google Scholar
  5. [5]
    Verband der Automobilindustrie: Press release about the study FAST 2025 — Massiver Wandel in der automobilen Wertschöpfungsstruktur. Online: www.vda.de/de/meldungen/news/20121114-2.html, access 12.02.2013
  6. [6]
    Fuchs, A.: “Off-highway has Different Innovation Cycles. Inteview with Robert Rank. In: ATZoffhighway, July 2015, pp. 20–25Google Scholar
  7. [7]
    Knapp, O.: Design-to-Value: Increasing Product Profitability. Stuttgarter Gespräche 2011, Stuttgart, 2011Google Scholar
  8. [8]
    Dörner, R.; et. Al.: Virtual und Augmented Reality (VR / AR): Grundlagen und Methoden der Virtuellen und Augmentierten Realität. Berlin/Heidelberg: Springer Vieweg, 2013CrossRefGoogle Scholar
  9. [9]
    Abrash M: Latency — the sine qua non of AR and VR. Online: http://blogs.valvesoftware.com/abrash/latency-the-sine-qua-non-of-ar-and-vr/, 2012, access 17.12.2015Google Scholar
  10. [10]
    Kells, D.; et al.: Virtually no limit to the exciting things VR can do.... In: raconteur.net — Sonderausgabe Raconteur, 17.12.2015: Virtual Reality, pp. 6–7, access 17.12.2015Google Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2016

Authors and Affiliations

  • Andreas Rüdenauer
    • 1
  • Julien Kipp
    • 1
  • Martin Scherer
    • 2
  • Bernhard Jahnke
    • 2
  1. 1.Rüdenauer 3D Technology GmbHKarlsruheGermany
  2. 2.Karlsruhe Institute of Technology (KIT)Germany

Personalised recommendations