Advertisement

China Foundry

, Volume 16, Issue 2, pp 126–134 | Cite as

Effects of electrode configuration on electroslag remelting process of M2 high-speed steel ingot

  • Fu-xing Yin
  • Yu Liang
  • Zhi-xia XiaoEmail author
  • Jian-hang Feng
  • Zhi-bin Xie
  • Yong-wang Mi
Research & Development
  • 22 Downloads

Abstract

The electrode configuration determines the thermophysical field during the electroslag remelting (ESR) process and affects the final microstructure of the ingot. In this work, ingot with a diameter of 400 mm was prepared with two electrode configuration modes of single power ESR process, namely one electrode (OE) and two series-connected electrodes (TSCE). Finite element simulation was employed to calculate the electromagnetic field, flow field and temperature field of the ESR system. The results show that the temperature of the slag pool and the metal pool of the TSCE process is lower and more uniform than that of the OE process. The calculated temperature distribution of the ingot could be indirectly verified from the shape of the metal pool by the experiment. The experimental results show that the depth of the metal pool in the OE ingot is about 160 mm, while the depth of the TSCE ingot is nearly 40 mm shallower than that of the OE ingot. Microstructural comparisons indicate that coarse eutectic carbides are formed in the center of the OE ingot, whereas more even eutectic carbides appear in the center of the TSCE ingot. In general, compared with the OE process, the TSCE process is preferred to remelt high speed steel ingots.

Key words

electroslag remelting metal pool shape electromagnetic field eutectic carbides high speed steel 

CLC numbers

TG142.45 

Document code

Notes

Acknowledgements

This work was financially surpported by the Foundation of Hebei Provincial Department of Education, China (Grant No. QN2018034 and QN2017051).

References

  1. [1]
    Karagöz S, Fischmeister H F. Cutting performance and microstructure of high speed steels: contributions of matrix strengthening and undissolved carbides. Metallurgical & Materials Transactions A, 1998, 29(1): 205–216.CrossRefGoogle Scholar
  2. [2]
    Boccalini M, Goldenstein H. Solidification of high speed steels. Metallurgical Reviews, 2001, 46(2): 92–115.CrossRefGoogle Scholar
  3. [3]
    Campbell J. Sixty years of casting research. Metallurgical & Materials Transactions A, 2015, 46(11): 4848–4853.CrossRefGoogle Scholar
  4. [4]
    Fezi K, Yanke J, Krane M J M. Macrosegregation during electroslag remelting of alloy 625. Metallurgical & Materials Transactions B, 2015, 46(2): 766–779.CrossRefGoogle Scholar
  5. [5]
    Giesselmann N, Rückert A, Eickhoff M, et al. Coupling of multiple numerical models to simulate electroslag remelting process for alloy 718. Transactions of the Iron & Steel Institute of Japan, 2015, 55(7): 1408–1415.CrossRefGoogle Scholar
  6. [6]
    Jeffrey Y, Kyle F, Trice R, et al. Simulation of slag-skin formation in electroslag remelting using a volume-of-fluid method. Numerical Heat Transfer, 2015, 67(3): 268–292.CrossRefGoogle Scholar
  7. [7]
    Li Baokuan, Wang Bo, Tsukihashi F. Modeling of electromagnetic field and liquid metal pool shape in an electroslag remelting process with two series-connected electrodes. Metallurgical & Materials Transactions B, 2014, 45(3): 1122–1132.CrossRefGoogle Scholar
  8. [8]
    Liu Xihai, Wang Junqing, Jia Weiguo, et al. Simulation of electro-slag re-melting process of 120t large ingot for nuclear power station and its application. China Foundry, 2011, 8(4): 413–417.Google Scholar
  9. [9]
    Dong Yanwu, Jiang Zhouhua, Liu Hui, et al. Simulation of multi-electrode ESR process for manufacturing large ingot. ISIJ International, 2012, 52(12): 2226–2234.CrossRefGoogle Scholar
  10. [10]
    Liu F B, Jiang Z H, Li H B, et al. Mathematical modelling of electroslag remelting P91 hollow ingots process with multi-electrodes. Ironmaking & Steelmaking, 2014, 41(10): 791–800.CrossRefGoogle Scholar
  11. [11]
    Ren N, Li BK, Li LM, et al. Numerical investigation on the fluid flow and heat transfer in electroslag remelting furnace with triple-electrode. Ironmaking & Steelmaking, 2016(1): 1–10.Google Scholar
  12. [12]
    Hernandez-Morales B, Mitchell A. Review of mathematical models of fluid flow, heat transfer, and mass transfer in electroslag remelting process. Ironmaking & Steelmaking, 1999, 26(6):423–438.CrossRefGoogle Scholar
  13. [13]
    Dong Yanwu, Hou Zhiwen, Jiang Zhouhua, et al. Study of a single-power two-circuit ESR process with current-carrying mold: mathematical simulation of the process and experimental verification. Metallurgical & Materials Transactions B, 2018, 49(1): 349–360.CrossRefGoogle Scholar
  14. [14]
    Kharicha A, Karimi-Sibaki E, Wu Menghuai, et al. Review on modeling and simulation of electroslag remelting. Steel Research International, 2018, 89: 1–20.CrossRefGoogle Scholar
  15. [15]
    Wang Qiang, Li Baokuan. Numerical Investigation on the effect of slag thickness on metal pool profile in electroslag remelting process. ISIJ International, 2016, 56(2): 282–287.CrossRefGoogle Scholar
  16. [16]
    Zhou Xuefeng, Fang Feng, Jiang Jianjing. Solidification microstructure of M2 high speed steel by different casting technologies. China Foundry, 2011, 8(3): 290–294.Google Scholar
  17. [17]
    Fischmeister H F, Riedl R, Karagöz S. Solidification of high-speed tool steels. Metallurgical Transactions A, 1989, 20(10): 2133–2148.CrossRefGoogle Scholar
  18. [18]
    Kurz W. Fisher D J. Fundamentals of solidification. Switzerland: Trans Tech Publications Ltd, 1998: 87–89.Google Scholar
  19. [19]
    Li Fulin, Fu Rui, Feng Di, et al. Microstructure and segregation behavior of Rene88DT alloy prepared by ESR-CDS. Rare Metal Materials & Engineering, 2016, 45(6): 1437–1442.CrossRefGoogle Scholar
  20. [20]
    Zhan Lichun, Chi Hongxiao, Ma Dangshen, et al. The as-cast microstructure of ESR-CDS M2 high speed steel. Material Engineering, 2013, 24(7): 29–34. (In Chinese)CrossRefGoogle Scholar

Copyright information

© Foundry Journal Agency and Springer Singapore 2019

Authors and Affiliations

  • Fu-xing Yin
    • 1
    • 2
    • 3
  • Yu Liang
    • 1
  • Zhi-xia Xiao
    • 1
    • 2
    • 3
    Email author
  • Jian-hang Feng
    • 1
    • 2
    • 3
  • Zhi-bin Xie
    • 4
  • Yong-wang Mi
    • 4
  1. 1.School of Materials Science and EngineeringHebei University of TechnologyTianjinChina
  2. 2.Research Institute for Energy Equipment MaterialsHebei University of TechnologyTianjinChina
  3. 3.Tianjin Key Laboratory of Materials Laminating Fabrication and Interfacial Controlling TechnologyTianjinChina
  4. 4.Heye Science and Technology Co., Ltd.HebeiChina

Personalised recommendations