Advertisement

China Foundry

, Volume 15, Issue 2, pp 110–116 | Cite as

Effects of hot top pulsed magneto-oscillation on solidification structure of steel ingot

  • Hui-cheng Li
  • Yu-xiang Liu
  • Yun-hu Zhang
  • Zhen Liu
  • Qi-jie Zhai
Research & Development
  • 39 Downloads

Abstract

Achieving a uniform structure with few defects in heavy steel ingot is of high commercial importance. In this present work, in order to verify the potential of pulsed magneto-oscillation (PMO) applied in the production of heavy ingot, an induction coil was located at the hot top of the steel ingot to develop a novel technique, named hot top pulsed magneto oscillation (HPMO). The influences of HPMO on the solidification structure, macro segregation and compactness of a cylindrical medium carbon steel ingot with the weight of 160 kg were systematically investigated by optical microscope (OM) and laser induced breakdown spectroscopy original position metal analyzer (LIBSOPA-IOO). The results show that HPMO not only causes significant grain refinement and promotes the occurrence of columnar to equiaxed transition (CET) but also can homogenize the carbon distribution and enhance the compactness of the steel ingot. Therefore, HPMO technique has the potential to be applied in the production of heavy steel ingots on an industrial scale.

Keywords

hot-top pulsed magneto oscillation (HPMO) solidified structures defects of steel ingot 

Document Code

References

  1. [1]
    Zhao Wenlong, Ma Qingxian. Technological Development of the Forged Low Pressure Rotor of Nuclear Turbine In China. Applied Mechanics and Materials. Trans Tech Publications, 2015, 703: 430–435.CrossRefGoogle Scholar
  2. [2]
    Li Dianzhong, Chen Xingqiu, Fu Paixian, et al. Inclusion flotation-driven channel segregation in solidifying steels. Nature Communications, 2014, 5:1–8.Google Scholar
  3. [3]
    Combeau H, Zaloznik M, Hans S, et al. Prediction of macrosegregation in steel ingots: Influence of the motion and the morphology of equiaxed grains. Metallurgical and Materials Transactions B, 2009, 40(3): 289–304.CrossRefGoogle Scholar
  4. [4]
    Gu J P, Beckermann C. Simulation of convection and macrosegregation in a large steel ingot. Metallurgical and Materials Transactions A, 1999, 30(5): 1357–1366.CrossRefGoogle Scholar
  5. [5]
    Smetana B, Zaludové M, Tkadleckovâ M, et al. Experimental verification of hematite ingot mould heat capacity and its direct utilisation in simulation of casting process. Journal of Thermal Analysis and Calorimetry, 2013, 112(1): 473–480.CrossRefGoogle Scholar
  6. [6]
    Heidarzadeh M, Keshmiri H. Influence of mould and insulation design on soundness of tool steel ingot by numerical simulation. Journal of Iron and Steel Research, International, 2013, 20(7): 78–83.CrossRefGoogle Scholar
  7. [7]
    Liu Xinbao, Osawa Y, Takamori S, et al. Grain refinement of AZ91 alloy by introducing ultrasonic vibration during solidification. Materials Letters, 2008, 62(17): 2872–2875.CrossRefGoogle Scholar
  8. [8]
    Watanabe T, Shiroki M, Yanagisawa A, et al. Improvement of mechanical properties of ferritic stainless steel weld metal by ultrasonic vibration. Journal of Materials Processing Technology, 2010, 210(12): 1646–1651.CrossRefGoogle Scholar
  9. [9]
    Bode O, Schwerdtfeger K, Geek H G, et al. Influence of casting parameters on void volume and centre segregation in continuously cast 100Cr6 blooms. Ironmaking & Steelmaking, 2008, 35(2): 137–145.CrossRefGoogle Scholar
  10. [10]
    Ludlow V, Normanton A, Anderson A, et al. Strategy to minimise central segregation in high carbon steel grades during billet casting. Ironmaking & Steelmaking, 2005, 32(1): 68–74.CrossRefGoogle Scholar
  11. [11]
    Ahmadein M, Wu M, Ludwig A. Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of AI-4 wt.% Cu ingot using a 5-phase model. Journal of Crystal Growth, 2015, 417: 65–74.CrossRefGoogle Scholar
  12. [12]
    Malekan M, Shabestari S G. Effect of grain refinement on the dendrite coherency point during solidification of the A319 aluminum alloy. Metallurgical and Materials Transactions A, 2009,40(13): 3196.CrossRefGoogle Scholar
  13. [13]
    Ma Jianhong, Li Jie, Gao Yulai, et al. Improving the carbon macrosegregation in high-carbon steel by an electric current pulse. Metals and Materials International, 2009,15(4): 603–608.CrossRefGoogle Scholar
  14. [14]
    Liao Xiliang, Zhai Qijie, Luo Jun, et al. Refining mechanism of the electric current pulse on the solidification structure of pure aluminum. Acta Materialia, 2007, 55(9): 3103–3109.CrossRefGoogle Scholar
  15. [15]
    Gong Yongyong, Luo Jun, Jing Jinxian, et al. Structure refinement of pure aluminum by pulse magneto-oscillation. Materials Science and Engineering: A, 2008, 497(1): 147–152.CrossRefGoogle Scholar
  16. [16]
    Li Qiushu, Song Changjiang, Li Huigai, et al. Effect of pulsed magnetic field on microstructure of 1Cr18Ni9Ti austenitic stainless steel. Materials Science and Engineering: A, 2007, 466(1): 101–105.CrossRefGoogle Scholar
  17. [17]
    Wang Bin, Yang Yuansheng, Zhou Jixue, et al. Microstructure refinement of AZ91D alloy solidified with pulsed magnetic field. Transactions of Nonferrous Metals Society of China, 2008,18(3): 536–540.CrossRefGoogle Scholar
  18. [18]
    Zhang Beijiang, Cui Jianzhong, Lu Guimin, et al. Effect of electromagnetic field on the macrosegregation of continuous casting 7075 alloy. Transactions of Nonferrous Metals Society of China, 2003,13(1): 158–161.Google Scholar
  19. [19]
    Zhang Beijiang, Cui Jianzhong, Lu Guimin, et al. Effect of frequency on the microstructure of electromagnetic field casting 7075 alloy. Acta Metallurgies Sinica, 2002, 38(2): 215–215. (In Chinese)Google Scholar
  20. [20]
    Tu Xurong, Zhou Quan, Chen Leping. Effect of low-voltage pulsed magnetic field on solidification structure and shrinkage of pure aluminum. Hot Working Technology, 2010, 39(3): 43–45. (In Chinese)Google Scholar
  21. [21]
    Yan Hongchun, He Guanhu, Zhou Benlian, et al. The influence of electric discharging current on the solidified structure of Sn-10%Pb alloy. Acta Metallurgical Sinica, 1997, 33(4): 352–358. (In Chinese)Google Scholar
  22. [22]
    Zhao Jing, Yu Jihao, Li Qiushu, et al. Structure of slowly solidified 30Cr2Ni4MoV casting with surface pulsed magneto-oscillation. Materials Science and Technology, 2015, 31(13): 1589–1594.CrossRefGoogle Scholar
  23. [23]
    Zhao Jing, Cheng Yufeng, Han Ke, et al. Numerical and experimental studies of surface-pulsed magneto-oscillation on solidification. Journal of Materials Processing Technology, 2016, 229: 286–293.CrossRefGoogle Scholar
  24. [24]
    Liang Dong, Liang Zhuyuan, Zhai Qijie, et al. Nucleation and grain formation of pure AI under Pulsed Magneto-Oscillation treatment. Materials Letters, 2014, 130: 48–50.CrossRefGoogle Scholar
  25. [25]
    Liang Dong, Liang Zhuyuan, Sun Jie, et al. Grain refinement of commercial pure AI treated by Pulsed Magneto-Oscillation on the top surface of melt. China Foundry, 2015,12(1): 48–53.MathSciNetGoogle Scholar
  26. [26]
    Qin Rongshan, Bhowmik A. Computational thermodynamics in electric current metallurgy. Materials Science and Technology, 2015, 31(13): 1560–1563.CrossRefGoogle Scholar
  27. [27]
    Qin Rongshan, Zhou Benlian. Effect of electric current pulses on grain size in castings. International Journal of Non-Equilibrium Processing (UK), 1998,11(1): 77–86.Google Scholar
  28. [28]
    Qin Rongshan. Critical assessment 8: outstanding issues in electropulsing processing. Materials Science and Technology, 2015, 31(2): 203–206.CrossRefGoogle Scholar
  29. [29]
    Wang Ping, Lu Guimin, Cui Jianzhong, Microstructure of nearby liquidus semi-continuous casting aluminum alloy A356. Acta Metallurgica Sinica. 2002, 38(4): 389–392.Google Scholar
  30. [30]
    Li Qiushu, Li Haibin, Zhai Qijie. Structure evolution and solidification behavior of austenitic stainless steel in pulsed magnetic field. Journal of Iron and Steel Research International, 2006,13(5): 69–72.CrossRefGoogle Scholar
  31. [31]
    Guo Shijie, Cui Jianzhong, Le Qichi, et al. The effect of alternating magnetic field on the process of semi-continuous casting forAZ91D billets. Material Letters 2005, 59:1841–1844.CrossRefGoogle Scholar
  32. [32]
    Hellawell A, Liu Shan, Lu Shuzu. Dendrite fragmentation and the effects of fluid flow in castings. Journal of the Minerals, Metals and Materials Society, 1997,49(3): 18–20.CrossRefGoogle Scholar
  33. [33]
    Wang Bin, Yang Yuansheng, Ma Xiaoping, et al. Simulation of electromagnetic-flow fields in Mg melt under pulsed magnetic field. Transactions of Nonferrous Metals Society of China, 2010, 20: 283–288.CrossRefGoogle Scholar
  34. [34]
    Li Yingju, Yang Yuansheng. Grain refinement of as-cast super alloy IN718 under action of low voltage pulsed magnetic field. Transactions of Nonferrous Metals Society of China, 2011,21 (6): 1277–1282.CrossRefGoogle Scholar
  35. [35]
    Edry I, Frage N, Hayun S. The effect of pulse magneto-oscillation treatment on the structure of aluminum solidified under controlled convection. Materials Letters, 2016,182:118–120.CrossRefGoogle Scholar

Copyright information

© Foundry Journal Agency and Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Hui-cheng Li
    • 1
    • 2
  • Yu-xiang Liu
    • 1
    • 2
  • Yun-hu Zhang
    • 1
    • 2
  • Zhen Liu
    • 1
    • 2
  • Qi-jie Zhai
    • 1
    • 2
    • 3
  1. 1.State Key Laboratory of Advanced Special SteelsShanghai UniversityShanghaiChina
  2. 2.School of Materials Science and EngineeringShanghai UniversityShanghaiChina
  3. 3.Materials Genome InstituteShanghai UniversityShanghaiChina

Personalised recommendations