Advertisement

A case for structural health monitoring (SHM) and civionics enhances the evaluation of the load carrying capacity of aging bridges

  • Aftab MuftiEmail author
  • Karim Helmi
Technical Note
  • 345 Downloads

Abstract

This paper discusses the reasons why civil engineers are very conservative in the design of new structures and the evaluation of existing structures. It is argued that structural health monitoring will assist in providing data that could be used to fine-tune the calibration of load and strength factors leading to more efficient and economical designs and better utilization of the strengths of existing structures. For major changes in design, construction and evaluation to be accepted, it is necessary that innovative structures be monitored for their health so that the required data bank can be developed. To assist in achieving this goal, civil engineers in Canada are developing a new discipline, which integrates civil engineering and electrophotonics under the combined term ‘civionics.’

Keywords

Civionics Conservative Data Decision Designs Efficient Evaluation Risk Safety index Structural engineers Structural health monitoring SHM 

Notes

Acknowledgements

The financial support of NSERC and SIMTReC Centre is gratefully acknowledged. The extensive and productive discussions with Dr. Baidar Bakht and Mr. Andy Horosko are incorporated in this paper’s content. Some of the ideas presented in the paper have been published.

References

  1. 1.
    Bakht B, Csagoly PF (1979) Bridge testing. Structures research report 79-SRR-10, Ministry of Transportation of Ontario, DownsviewGoogle Scholar
  2. 2.
    Bakht B, Mufti A (2017) Evaluation of one hundred and one instrumented bridges. SIMTReC, University of Manitoba, WinnipegGoogle Scholar
  3. 3.
    Bakht B, Mufti A, Helmi K (2014) Bridge weighing-in-motion study on the Paradise Island Bridge East. ISIS Canada Recourse Center, WinnipegGoogle Scholar
  4. 4.
    Canadian Bridge Design Code (2014) CAN/CSA-S6-14Google Scholar
  5. 5.
    Helmi K, Bakht B, Mufti A (2014) Accurate measurements of gross vehicle weight through bridge weigh-in-motion: a case study. J Civ Struct Health Monit 4(3):195–208CrossRefGoogle Scholar
  6. 6.
    ISIS Canada Research Network Web Site (2003) Winnipeg, Manitoba, Canada. www.isiscanada.com. Accessed Dec 2016
  7. 7.
    Lydon M, Taylor SE, Robinson D, Mufti A, Brien EJO (2016) Recent developments in bridge weigh in motion (B-WIM). J Civ Struct Health Monit 6(1):69–81CrossRefGoogle Scholar
  8. 8.
    Melchers RE (1987) Structural reliability and analysis prediction. Ellis Horwood Ltd., ChichesterGoogle Scholar
  9. 9.
    Moses F (1979) Weigh-in-motion system using instrumented bridges. J Transp Eng 105(3):233–249Google Scholar
  10. 10.
    Mufti AA (2001) Guidelines for structural health monitoring. ISIS Canada Research Network, Design Manual #2. Winnipeg, Manitoba, CanadaGoogle Scholar
  11. 11.
    Mufti AA (2003) Integration of sensing in civil engineering structures: development of the new discipline of civionics. In: Proceedings for the first international conference on structural health monitoring and intelligent infrastructure (SHMII-1), Tokyo, JapanGoogle Scholar
  12. 12.
    Ojio T, Yamada K (2002) Bridge weigh-in-motion systems using stringers of plate girder bridges. In: Third international conference on weigh-in-motion (ICWIM3), Iowa State University, AmesGoogle Scholar
  13. 13.
    Rivera E, Mufti AA, Thomson D (2004) Civionics specifications. ISIS Canada Research Network, Design Manual #6. Winnipeg, Manitoba, CanadaGoogle Scholar
  14. 14.
    Wall CJ, Christenson RE, McDonnell AMH, Jamalipour A (2009) A non-intrusive bridge weigh-in-motion system for a single span steel girder bridge using only strain measurements (No. CT-2251-3-09-5)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  1. 1.University of ManitobaWinnipegCanada
  2. 2.ISIS Canada Resource CentreWinnipegCanada

Personalised recommendations