Flexural Performance and Failure Modes of NSM CFRP-Strengthened Concrete Beams: A Parametric Study
- 47 Downloads
The flexural performance and failure modes of concrete beams, strengthened with near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strips were investigated. For this, reinforced concrete beams (150 × 250 × 1400 mm) were cast, and cured for 28 days, then strengthened with NSM CFRP strips at varying numbers (1–3), lateral spacing (50–100 mm), and embedment lengths (150–450 mm). The impact of staggering of NSM CFRP strips upon strengthening efficiency was tackled, as well. The flexural mechanical response, strain in strips at failure, and cracking and failure modes were evaluated for all concrete beams under a four-point loading test setup. The findings indicated that inserting NSM CFRP strips at a certain lateral distance from the main steel bars prevented end-cover peeling-off. Furthermore, staggering NSM CFRP strips contributed to increasing the residual flexural capacity and toughness of strengthened beams by as much as 30 and 51%, respectively, although it led to a slight reduction in their ductility. In general, the present study confirmed the findings of different literature works with regard to the effect of key repair parameters using NSM CFRP strips.
KeywordsStrengthening NSM CFRP strips Peeling off Analytical prediction Strain
The authors acknowledge the technical and financial support provided by the research deanship at Jordan University of Science and Technology (project number 153/2015) and the assistance by the technicians at the structural and materials laboratory via the Department of Civil Engineering.
Dean of Scientific Research, Jordan University of Science and Technology, P.O. Box 3030, 22110 Irbid, Jordan.
- 3.Jones R, Swamy RN, Charif A (1988) Plate separation and anchorage of reinforced concrete beams strengthened by epoxy-bonded steel plates. Struct Eng 66(5):85–94Google Scholar
- 13.American Concrete Institute (2008) Building code requirements for structural concrete and commentary (ACI-318). American Concrete Institute, Farmington HillsGoogle Scholar
- 14.ASTM International (2004) American Society for Testing and Materials International (ASTM). ASTM International, West ConshohockenGoogle Scholar
- 15.ACI Manual of Concrete Practice (2008) Standard practice for selecting proportions for normal, heavyweight, and mass concrete (ACI 211.1), Part I: Materials and general properties of concrete. ACI, DetroitGoogle Scholar
- 17.Barros J, Kotynia R (2008) Possibility and challenges of NSM for the flexural strengthening of RC structures, In: Fourth international conference on FRP composites in civil engineering (CICE 2008), Zurich, p 6Google Scholar
- 18.ACI Committee 440 (2008) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (440.2R-08). American Concrete Institute, Farmington Hills, p 76Google Scholar
- 20.Hognestad E, Hanson NW, McHenry D (1955) Concrete stress distribution in ultimate strength design. ACI J Proc 52(4):455–480Google Scholar