Durability of CFRP-Wrapped Concrete Exposed to Hydrothermal Environment
- 44 Downloads
In recent years, it has become increasingly common to strengthen concrete by wrapping carbon fibre reinforced polymer (CFRP) laminates to improve its compressive strength and ductility. However, studies on the durability of CFRP-confined concrete are relatively scarce, which could significantly hinder the application of CFRP in structural reinforcement. An experimental study was conducted to investigate the effect of exposure to natural hydrothermal environment on the confinement system of CFRP-wrapped concrete in this study. Three kinds of specimens were prepared and tested after natural exposure to the subtropical environment in South China, including 35 CFRP flat coupons, 35 epoxy adhesive flat coupons and 60 CFRP-wrapped concrete cylinders. The test parameters included the exposure duration (0, 6, 12, 18 and 30 months) for all specimens and the number of CFRP layers (0, 1, 2 and 3) for the CFRP-wrapped concrete specimens. Based on the experimental results, a compressive strength model for the CFRP-confined concrete exposed to hydrothermal environment was proposed. The results show that hydrothermal environment had a significant effect on the mechanical properties of the epoxy adhesive, but a relatively slight effect on that of the CFRP. Due to the deterioration of the CFRP, the compressive strength of CFRP-wrapped concrete gradually decreased with the increase of exposure duration. After a 30-month exposure, the compressive strength of CFRP-wrapped concrete has a decrease of approximately 10%.
KeywordsDurability Carbon fibre reinforced polymer (CFRP) Hydrothermal environment Natural exposure Confined concrete
The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (No. 11372076 and No. 11672076), the Foundation of Guangdong Provincial Department of Transportation (No. 201402027), the Science and Technology Planning Project of Guangzhou City (No. 201510010042 and No.201510010096), the Rolling Project of Colleges and Universities Engineering Center in Guangdong Province (No. 13ZK0403) and the Science and Technology Planning Project of Guangdong Province (No. 2014A010105044).
Compliance with ethical standards
Conflict of interest
The authors declare no competing financial interests.
- 1.Choi HK, Bae BI, Choi CS (2016) Lateral resistance of unreinforced masonry walls strengthened with engineered cementitious composite. Int J Civil Eng 14(6):411–424Google Scholar
- 7.Abbasnia R, Holakoo A (2012) An investigation of stress-strain behavior of FRP-confined concrete under cyclic compressive loading. Int J Civil Eng 10(3):201–209Google Scholar
- 12.Kong A, Fam A Z, Green M (2008) Freeze-thaw behavior of FRP-confined concrete under sustained load. In: 7th Int. Symp. of the Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-7), Kansas City, Missouri; November 6–9, 2005, pp 705–722Google Scholar
- 13.Erdil B, Akyuz U, Yaman IO (2008) Behaviour of CFRP reinforced low-strength concretes subjected to temperature changes and sustained loads. In 4th World Conference on Earthquake Engineering, Beijing, ChinaGoogle Scholar
- 17.Micelli F, Aiello MA, Maffezzoli A, Modarelli R (2008) Mechanical behaviour of GFRP-confined concrete after exposure tosevere conditions. In: 11DBMC Conference on Durability of Building Materials and Components, Istanbul, Turkey, pp 577–584Google Scholar
- 19.Gharachorlou A, Ramezanianpour AA (2010) Durability of concrete cylinder specimens strengthened with FRP laminates under penetration of chloride ions. Int J Civil Eng 8(4):327–336Google Scholar
- 21.Belarbi A, Myers JJ, Chandrashekhara K, Watkins SE, Bae SW (2004) Structural integrity of RC columns wrapped with FRP sheet subjected to various environmental conditions including corrosion. Research Report: RDT 04–021, Missouri Department of TransportationGoogle Scholar
- 23.GB50608-2010 (2010) Technical code for infrastructure application of FRP composites. China Metallurgical Construction Association, ChinaGoogle Scholar
- 24.ACI 440.2R-08 (2008) Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI Committee, USAGoogle Scholar
- 25.HB 305-2008 (2008) Design handbook for RC structures retrofitted with FRP and metal plates: beams and slabs. Standards Australia Limited, AustraliaGoogle Scholar
- 26.CNR-DT 200/2004 (2004) Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. Advisory Committee on Technical Recommendations for Construction, Italy;Google Scholar