Advertisement

Impact Deformation of Curved Nanocomposite Panels

  • A. Bidi
  • Gh. Liaghat
  • Gh. Rahimi
Research Paper
  • 6 Downloads

Abstract

In this study, low-velocity impact response of cylindrically curved bilayer panels is studied. A large number of parameters affect the impact dynamics, and many models have been used previously; these models can be classified as energy-balance model; spring–mass model and complete models in which the dynamic behavior of the structure is exactly modeled. In this study, a spring–mass model is used to evaluate the displacement response of curved panel. This work uses modified Hertz contact model which is linearized form of general Hertz contact law. Fourier series expansion is used to derive the governing equations of panel. In this paper, the effects of panel curvature and mass of impactor on the shell behavior under low-velocity impact are investigated. The results show that changing the panel radius of curvature will change the panel deformation. A numerical simulation analysis is used for result validation, and the results are compared to analytical model.

Keywords

Panel deformation Analytical model Hertz contact law FEM solution 

References

  1. Abrate S (1994) Impact on laminated composites. Appl Mech Rev 47:517–544CrossRefGoogle Scholar
  2. Abrate S (2001) Modeling of impacts on composite structures. Compos Struct 51:129–138CrossRefGoogle Scholar
  3. Bert CW, Birman V (1988) Parametric instability of thick, orthotropic, circular cylindrical shells. Acta Mech 71:67–76CrossRefzbMATHGoogle Scholar
  4. Bidi A, Liaghat Gh, Rahimi Gh (2015) Experimental and numerical analysis of impact on steel curved panels. J Modares Mech Eng 16:281–288Google Scholar
  5. Bilisik Kadir, Yolacan Gaye (2014) Experimental characterization of multistitched two dimensional (2D) woven E-glass/polyester composites under low velocity impact load. J Compos Mater 48(17):2145–2162.  https://doi.org/10.1177/0021998313494918 CrossRefGoogle Scholar
  6. Christoforou AP, Swanson SR (1990) Analysis of simply-supported orthotopic cylindrical shells subject to lateral impact loads. J Appl Mech 57:376–382CrossRefGoogle Scholar
  7. Dobyns AL (1980) Analysis of simply-supported orthotropic plates subjected to static and dynamic loads. AIAA paper no. 80-0680Google Scholar
  8. Gong SW, Toh SL, Shim VPW (1994) The elastic response of orthotropic laminated cylindrical shells to low-velocity impact. Compos Eng 4:241–266CrossRefGoogle Scholar
  9. Greszczuk LB (1982) Damage in composite materials due to low velocity impact. In: Impact dynamics. John Wiley, New York, pp 55–94Google Scholar
  10. Karas K (1939) Platten unter seitlichem Stoss. Zng Arch 10:237–250MathSciNetzbMATHGoogle Scholar
  11. Khalili SMR, Shokuhfar A, Malekzadeh K, Ashenai Ghasemi F (2007) Low-velocity impact response of active thin-walled hybrid composite structures embedded with SMA wires. Thin-walled structures no. 45, pp 799–808Google Scholar
  12. Lee IEH (1940) Impact of a mass striking a beam. J Appl Mech 7:129–138MathSciNetGoogle Scholar
  13. Moriwaki T (1978) Optimizing dynamic force in shock excitation testing. SME, Dearborn, pp 427–434Google Scholar
  14. Shivakumar KN, Elber W, Illg W (1985) Prediction of impact force and duration due to low-velocity impact on circular composite laminates. J Appl Mech 52:674–680CrossRefzbMATHGoogle Scholar
  15. Sierakowski RL, Chaturvedi SK (1989) Dynamic loading and characterization of fiber-reinforced composites, vol 13, issue 6. Wiley, New YorkGoogle Scholar
  16. Timoshenko S, Krieger S (1959) Theory of plates and shells, 2nd edn. Mcgraw-Hill College, New YorkzbMATHGoogle Scholar
  17. Wu H-YT, Chang FK (1989) Transient dynamic analysis of laminated composite plates subjected to transverse impact. Comput Struct 31:453–466CrossRefGoogle Scholar

Copyright information

© Shiraz University 2018

Authors and Affiliations

  1. 1.Mechanical Engineering DepartmentTarbiat Modares UniversityTehranIran

Personalised recommendations