Advertisement

The Effect of the Substitution of Silicon by Aluminum on the Properties of Lamellar Graphite Iron

  • E. AguadoEmail author
  • M. Ferrer
  • P. Larrañaga
  • D. M. Stefanescu
  • R. Suárez
Article
  • 18 Downloads

Abstract

In cast iron, silicon and aluminum are elements that promote graphite precipitation and strengthen the alloy by solid solution. In the present work, Si has been substituted by Al leading to values that easily surpass standard properties of Fe–C–Si gray cast irons, reaching a strength of 466 MPa at moderate hardness (250 HB) for an iron with 3.08% C, 3.15% Al and 0.16% Si. Sequences of heats increasing Al content were carried out. It was found that the UTS increases with the Al content, reaching a maximum at about 3% Al, after which it decreases. Graphite area measurements show a minimum at the maximum UTS, with graphite exhibiting random orientation. Carbides are avoided above 1.5% Al for very low Si content (about 0.2%) in Y2 keel blocks (25 mm thickness). Plates as thin as 2.5 mm were cast free of carbides from irons with more than 3% Al, which makes this material very desirable for thin wall castings. Additions of other elements were necessary, including 0.35% chromium, 0.55% manganese and 0.075% tin to obtain a pearlitic structure.

Keywords

aluminum alloyed gray iron high tensile strength gray iron Fe–C–Al alloy 

Notes

Acknowledgements

The authors would like to acknowledge Diputación Foral de Bizkaia for supporting this research.

References

  1. 1.
    E. Hugony, Le ghise all’aluminio. Caracteristichi, technologia e aplicazione, La Fonderia Italiana 2, 33–46 (1965)Google Scholar
  2. 2.
    E. Piwowarsky, E. Sohnchen, The effect of aluminum on cast iron. Metallwirtschaft 12, 417–421 (1933)Google Scholar
  3. 3.
    E.U. Petitbon, J.F. Wallace, Aluminum alloyed gray iron—properties at room and elevated temperatures. AFS Cast Met. Res. J. 9, 127 (1973)Google Scholar
  4. 4.
    F. Henke, Heat resistant cast iron. Giess. Prax. 5(72–81), 87–93 (1969)Google Scholar
  5. 5.
    R.P. Walson, Aluminum alloyed cast irons properties used in design. AFS Trans. 85, 51–58 (1977)Google Scholar
  6. 6.
    C. Defrancq, J. Van Eeghem, A. DeSy, Study of the inoculation of gray cast irons from the Fe–C–Al system; development of a new flake graphite cast iron with very high strength, in 36th International Foundry Congress, Belgrade, CIATF (1969)Google Scholar
  7. 7.
    C. Defrancq, J. Van Eeghem, A. DeSy, Further development of aluminum cast iron inoculated with high amounts of calcium, in 40th International Foundry Congress, Moscow, CIATF (1973)Google Scholar
  8. 8.
    J.A. Yaker, L.E. Byrnes, E.H. Petitbon, W.C. Leslie, Microstructures and strength of aluminum-containing gray and nodular irons in the temperature range 1200–1800 °F (649–982C). AFS Trans. 84, 305–320 (1976)Google Scholar
  9. 9.
    D.M. Stefanescu, F. Martinez, Compacted/vermicular graphite cast irons in the Fe–C–Al system. AFS Trans. 90, 39–46 (1982)Google Scholar
  10. 10.
    F. Martinez, D.M. Stefanescu, Properties of compacted/vermicular graphite cast irons in the Fe–C–Al system produced by ladle and in-mold treatment. AFS Trans. 91, 593–606 (1983)Google Scholar
  11. 11.
    D.M. Stefanescu, F. Martinez, Compacted graphite cast irons in the iron–carbon–aluminum system, U.S. Patent no. 4,501,612 (1985)Google Scholar
  12. 12.
    H.M. Muhmond, H. Fredriksson, Graphite growth control analysis in high Al cast iron. Int. J. Cast Met. Res. 29(5), 272–278 (2016)CrossRefGoogle Scholar
  13. 13.
    F. Mampaey, aluminum cast irons: solidification, feeding and oxygen activities, in AFS Transaction vol. 69, Paper 05-149 (2005)Google Scholar
  14. 14.
    A. Shayesteh-Zeraati, H. Naser-Zoshki, A.R. Kiani-Rashid, Microstructural and mechanical properties (hardness) investigations of Al-alloyed ductile cast iron. J. Alloys Compd. 500, 129–133 (2010)CrossRefGoogle Scholar
  15. 15.
    A. Shayesteh-Zeraati, H’ Naser-Zoshki, A.R. Kiani-Rashid, M.R. Yousef-Sani, The effect of aluminium content on morphology, size, volume fraction, and number of graphite nodules in ductile cast iron, in Proceedings of IMechE, Part L: Journal of Materials: Design and Applications, vol. 224, pp. 117–122 (2010)Google Scholar
  16. 16.
    F. Neumann, The influence of additional elements on the physico-chemical behavior of carbon in carbon saturated molten iron, in Recent Research on Cast Iron, ed. by H.D. Merchant (Gordon and Breach, NY, 1968), pp. 659–705Google Scholar
  17. 17.
    D.M. Stefanescu, J. Lacaze, Thermodynamics principles as applied to cast iron, in ASM Handbook, Cast Iron Science and Technology, ed. by D.M. Stefanescu (ASM Int., Materials Park, Ohio, 2017), pp. 31–45Google Scholar
  18. 18.
    E. Aguado, M. Ferrer, P. Larrañaga, D.M. Stefanescu, R. Suárez, The effect of the substitution of silicon by aluminum on the mechanical properties of gray iron, in 73rd World Foundry Congress, Krakow, Poland (2018)Google Scholar

Copyright information

© American Foundry Society 2019

Authors and Affiliations

  • E. Aguado
    • 1
    Email author
  • M. Ferrer
    • 1
  • P. Larrañaga
    • 1
  • D. M. Stefanescu
    • 2
    • 3
  • R. Suárez
    • 4
  1. 1.Área Ingeniería, I+D y Procesos MetalúrgicosIK4-AzterlanDurangoSpain
  2. 2.The Ohio State UniversityColumbusUSA
  3. 3.The University of AlabamaTuscaloosaUSA
  4. 4.Veigalan EstudioDurangoSpain

Personalised recommendations