Feasibility of US Foundry Supply Chain Consumables for Three-Dimensional Sand Printing
- 10 Downloads
The purpose of this study was to assess the performance characteristics of commercially available US foundry consumables for use in three-dimensional sand printers. The silica sands selected were 57 grain fineness number (GFN) and 70 GFN. These sands were a high-purity round grain silica and had low trace contaminates, to reduce any possible influence from contaminates. The furan resin system was selected since it is the most widely utilized resin system for 3D printed sand in the USA. The furan resin system was from a domestic US foundry supplier. The printed samples were traditional tensile specimen and rectangle samples for the determination of density. The samples were examined for the following properties: tensile strength, loss on ignition, density, scratch hardness, and permeability. The results of this investigation confirmed that the tested domestic resin system and silica sands matched the original equipment manufacturer performance properties.
Keywordsthree-dimensional printed sand silica furan tensile strength scratch hardness printed density
This paper is small portion of the master thesis topic “Sand distribution effect on three dimensional printed sand properties” completed on May 2018 at University of Northern Iowa. For additional data, tables, and discussion, access the full thesis at https://scholarworks.uni.edu/etd/534.
- 1.K. Nyembwe, M. Mashila, P. Van Tonder, D. De Beer, E. Gonya, Physical properties of sand parts produced using a Voxeljet VX1000 three-dimensional printer. S. Afr. J. Ind. Eng. 27(3), 136–142 (2016)Google Scholar
- 2.D. Snelling, H. Blount, C. Foram, K. Ramsburg, A. Wentzel, C. Williams, A. Duschitz, The effects of 3D printed molds on metal castings, in Solid Freedom Fabrication Symposium. Austin, TX (2014)Google Scholar
- 5.American Foundry Society, AFS Mold and Core Test Handbook, 4th edn. (American Foundry Society, Schaumburg, 2015)Google Scholar