Advertisement

Journal of Sustainable Metallurgy

, Volume 3, Issue 4, pp 669–670 | Cite as

Preface for Thematic Section: Molten Slags, Fluxes, and Salts for Sustainable Processing

Thematic Section: Molten Slags, Fluxes, and Salts for Sustainable Processing
  • 54 Downloads
Part of the following topical collections:
  1. Molten Slags, Fluxes, and Salts for Sustainable Processing
The thematic section Molten Slags, Fluxes, and Salts for Sustainable Processing contains new peer-reviewed papers by authors who presented on the same topic in the 10th International Conference on Molten Slags, Fluxes and Salts, in Seattle, WA, USA, May 22–25, 2016. The technical topics at the conference covered many areas of molten slags, fluxes, and salts that are pertinent to Sustainable Metallurgy, such as thermodynamics and interfacial properties, phase diagrams, structural studies, erosion and corrosion, recycling, transport phenomena, and process optimizations. This thematic section contains 8 papers: 3 are in the area of recycling materials for other products, 3 in the area of metals recovery, 1 in the area of steelmaking, and 1 in the area of environmental impact. In all these applications, melts comprising molten salts, fluxes, and oxide systems (slags) play a very important role in determining the viability of the application. The list of technologically important areas...

References

  1. 1.
    Ouchi T, Kim H, Spatocco BL, Sadoway DR (2016) Calcium-based multi-element chemistry for grid-scale electrochemical energy storage. Nat Commun 7Google Scholar
  2. 2.
    Doughty DH, Butler PC, Akhil AA, Clark NH, Boyes JD (2010) Batteries for large-scale stationary electrical energy storage. Electrochem Soc Interface 19(3):49–53CrossRefGoogle Scholar
  3. 3.
    Luo X, Wang J, Dooner M, Clarke J (2015) Overview of current development in electrical energy storage technologies and the application potential in power system operation. Appl Energy 137:511–536CrossRefGoogle Scholar
  4. 4.
    Liu X, Fechler N, Antonietti M (2013) Salt melt synthesis of ceramics, semiconductors and carbon nanostructures. Chem Soc Rev 42(21):8237–8265CrossRefGoogle Scholar
  5. 5.
    Henderson GS, Calas G, Stebbins JF (2006) The structure of silicate glasses and melts. Elements 2(5):269–273CrossRefGoogle Scholar
  6. 6.
    Guan X, Pal UB, Jiang Y, Su S (2016) Clean metals production by solid oxide membrane electrolysis process. J Sustain Metall 2(2):152–166CrossRefGoogle Scholar
  7. 7.
    Su S, Pal U, Guan X (2016) Zero-direct-carbon-emission aluminum production by solid oxide membrane-based electrolysis process. In Advances in molten slags, fluxes, and salts: proceedings of the 10th international conference on molten slags, fluxes and salts 2016. Springer, Cham, 781–790Google Scholar
  8. 8.
    Guan X, Pal UB, Powell AC (2014) Energy-efficient and environmentally friendly solid oxide membrane electrolysis process for magnesium oxide reduction: experiment and modeling. Metall Mater Trans E 1(2):132–144Google Scholar
  9. 9.
    Chen GZ, Fray DJ, Farthing TW (2000) Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature 407(6802):361CrossRefGoogle Scholar
  10. 10.
    Zou X, Lu X, Li C, Zhou Z (2010) A direct electrochemical route from oxides to Ti–Si intermetallics. Electrochim Acta 55(18):5173–5179CrossRefGoogle Scholar
  11. 11.
    Takeda O, Okabe TH, Umetsu Y (2006) Recovery of neodymium from a mixture of magnet scrap and other scrap. J Alloys Compd 408:387–390CrossRefGoogle Scholar
  12. 12.
    Murase K, Shinozaki K, Hirashima Y, Machida KI, Adachi GY (1993) Rare earth separation using a chemical vapour transport process mediated by vapour complexes of the LnCl3-AlCl3 system. J Alloys Compd 198(1–2):31–38CrossRefGoogle Scholar
  13. 13.
    Xiao Y, Reuter MA, Boin UDO (2005) Aluminium recycling and environmental issues of salt slag treatment. J Environ Sci Health 40(10):1861–1875CrossRefGoogle Scholar
  14. 14.
    Guan X, Zink PA, Pal UB, Powell AC (2013) Recycling of magnesium alloy employing refining and solid oxide membrane (SOM) electrolysis. Metall Mater Trans B 44(2):261–271CrossRefGoogle Scholar
  15. 15.
    Li L, Cheng G, Hu B, Wang CS, Qian G (2017) Effect of Cr2O3 on the properties of stainless steel refining slags and desulfurization. Metall Res Technol 114(1):114CrossRefGoogle Scholar
  16. 16.
    Utton CA, Swanton SW, Schofield J, Hand RJ, Clacher A, Hyatt NC (2012) Chemical durability of vitrified wasteforms: effects of pH and solution composition. Mineral Mag 76(8):2919–2930CrossRefGoogle Scholar
  17. 17.
    Bingham PA, Hyatt NC, Hand RJ, Wilding CR (2008) Glass development for vitrification of wet intermediate level waste (WILW) from decommissionning of the Hinkley point ‘A’ site. MRS Online Proc Libr Arch 1124Google Scholar
  18. 18.
    Donald IW, Metcalfe BL, Taylor RJ (1997) The immobilization of high level radioactive wastes using ceramics and glasses. J Mater Sci 32(22):5851–5887CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2017

Authors and Affiliations

  1. 1.Boston UniversityBostonUSA

Personalised recommendations