Advertisement

Numerical Simulation of Dusty Air Flow and Particle Deposition Inside Permeable Alveolar Duct

  • Jyoti Kori
  • Pratibha
Original Paper
  • 17 Downloads

Abstract

There were huge inconsistencies in deposition between ducts of a particular generation and inside every alveolated duct, signifying that limited particle concentration can be much bigger than the mean acinar concentration. A large number of particles are unsuccessful to way out during expiration. Therefore, to study the effect of inhaled particles of nano size inside alveolar region of human lung we used Navier–Stokes equation by including Darcy term together with Newton equation of motion. Finite difference technique has been used to solve the governing equation, which assumed to take axial symmetry under laminar pulsatile flow condition, so that the problem efficiently becomes two dimensional. Computational work is done on MATLAB R2016 by user defined code and effect of porosity, Darcy number and Reynolds number are analysed to study the flow condition inside alveolar region. Results show that porosity is an active factor for deposition of nanoparticles and the fraction of particles trapped in the alveolus increases by decreasing the Darcy number.

Keywords

Alveolar region Deposition Permeability Pulsatile flow Nanoparticle 

Notes

Acknowledgements

The author, Jyoti Kori, is thankful to Ministry of Human Resource Development India (Grant Code: MHR-02-23-200-44) for providing fund and support while writing this manuscript.

Compliance with Ethical Standards

Conflict of interest

The authors declare that they have conflict of interest.

References

  1. 1.
    Balashazy, I., Hofmann, W., Farkas, A., Madas, B.G.: Three-dimensional model for aerosol transport and deposition in expanding and contracting alveoli. Inhal. Toxicol. 20, 611–621 (2008)CrossRefGoogle Scholar
  2. 2.
    Chuang, H., Hsiao, T., Wang, S., Tsay, S., Lin, N.: Characterization of particulate matter profiling and alveolar deposition from biomass burning in Northern Thailand: the 7-SEAS study. Aerosol Air Qual. Res. 16, 2897–2906 (2016)CrossRefGoogle Scholar
  3. 3.
    Cheng, P.: Heat transfer in geothermal systems. Adv. Heat Transf. 14, 1–105 (1979)CrossRefGoogle Scholar
  4. 4.
    DeGroot, C., Straatman, A.: A porous media model of alveolar duct flow in the human lung. J. Porous Media. 21, 405–422 (2018)CrossRefGoogle Scholar
  5. 5.
    Ergun, S.: Fluid flow through packed columns. Chem. Eng. Prog. 48, 89–94 (1949)Google Scholar
  6. 6.
    Heyder, J.: Deposition of inhaled particles in the human respiratory tract and consequences for regional targeting in respiratory drug delivery. Proc. Am. Thorac. Soc. 1, 315–320 (2004)CrossRefGoogle Scholar
  7. 7.
    Haber, S., Yitzhak, D., Tsuda, A.: Gravitational deposition in a rhythmically expanding and contracting alveolus. J. Appl. Physiol. 95, 657–671 (2013)CrossRefGoogle Scholar
  8. 8.
    Ismail, Z., Abdullah, I., Mustapha, N., Amin, N.: A power-law model of blood flow through a tapered overlapping stenosed artery. Appl. Math. Comput. 195, 669–680 (2007)MathSciNetzbMATHGoogle Scholar
  9. 9.
    Kapur, J.N.: Mathematical Models in Biology and Medicine. East-West Press, Pvt. Ltd., New Delhi (1985)zbMATHGoogle Scholar
  10. 10.
    Khanafer, K., Cook, K., Marafie, A.: The role of porous media in modeling fluid flow within hollow fiber membranes of the total artificial lung. J. Porous Media 15, 113–122 (2012)CrossRefGoogle Scholar
  11. 11.
    Kori, J., Pratibha, : Numerical simulation of mucus clearance inside lung airways. J. Appl. Fluid Mech. 11, 1163–1171 (2018)Google Scholar
  12. 12.
    Kuwahara, F., Sano, Y., Liu, J., Nakayama, A.: A porous media approach for bifurcating flow and mass transfer in a human lung. J. Heat Transf. 131, 101013-5 (2009)CrossRefGoogle Scholar
  13. 13.
    Koullapis, P.G., Kassinos, S.C., Bivolarova, M.P., Melikov, A.K.: Particle deposition in a realistic geometry of the human conducting airways: effects of inlet velocity profile, inhalation flow rate and electrostatic charge. J. Biomech. 49(11), 2201–2212 (2016)CrossRefGoogle Scholar
  14. 14.
    Li, D., Xu, Q., Liu, Y., Libao, Y., Jun, J.: Numerical simulation of particles deposition in a human upper airway. Adv. Mech. Eng. (2014).  https://doi.org/10.1155/2014/207938
  15. 15.
    Mandal, P.K.: An unsteady analysis of non-Newtonian blood flow through tapered arteries with a stenosis. Int. J. Non-linear Mech. 40, 151–164 (2005)CrossRefGoogle Scholar
  16. 16.
    Omlor, A.J., Nguyen, J., Bals, R., Dinh, Q.T.: Nanotechnology in respiratory medicine. Respir. Res. 16, 64 (2015)CrossRefGoogle Scholar
  17. 17.
    Owen, M.R., Lewis, M.A.: The mechanics of lung tissue under high-frequency ventilation. SIAM J. Appl. Math. 61, 1731–1761 (2001)MathSciNetCrossRefGoogle Scholar
  18. 18.
    Qiao, H., Liu, W., Gu, H., Wang, D., Wang, Y.: The transport and deposition of nanoparticles in respiratory system by inhalation. J. Nanomaterials 1–8 (2015).  https://doi.org/10.1155/2015/394507
  19. 19.
    Smith, S., Cheng, U.S., Yeh, H.C.: Deposition of ultra fine particles in human tracheobronchial airways of adults and children. Aerosol Sci. Technol. 35, 697–709 (2010)CrossRefGoogle Scholar
  20. 20.
    Saini, A., Katiyar, V.K., Pratibha, : Numerical simulation of gas flow through a biofilter in lung tissues. World J. Model. Simul. 11, 33–42 (2015)Google Scholar
  21. 21.
    Saini, A., Katiyar, V.K., Pratibha, : Two-dimensional model of nanoparticle deposition in the alveolar ducts of the human lung. Appl. Appl. Math. 12, 305–318 (2017)MathSciNetzbMATHGoogle Scholar
  22. 22.
    Shang, Y.D., Inthavong, K., Tu, J.Y.: Detailed micro-particle deposition patterns in the human nasal cavity influenced by the breathing zone. Comput. Fluids 114, 141–150 (2015)MathSciNetCrossRefGoogle Scholar
  23. 23.
    Sleeth, D.K., Balthaser, S.A., Collingwood, S., Larson, R.R.: Estimation of the human extrathoracic deposition fraction of inhaled particles using a polyurethane foam collection substrate in an IOM Sampler. Int. J. Environ. Res. Public Health. 13, 292 (2016)CrossRefGoogle Scholar
  24. 24.
    Seraa, T., Uesugib, K., Yagib, N., Yokotac, H.: Numerical simulation of air flow and microparticle deposition in a synchrotron micro-CT-based pulmonary acinus model. Comput. Methods Biomech. Biomed. Eng. 18, 1427–1435 (2013)CrossRefGoogle Scholar
  25. 25.
    Sturm, R., Hofmann, W.: A theoretical approach to the deposition and clearance of fibers with variable size in the human respiratory tract. J. Hazard. Mater. 170, 210–218 (2009)CrossRefGoogle Scholar
  26. 26.
    Sturm, R.: Theoretical deposition of carcinogenic particle aggregates in the upper respiratory tract. Ann. Transl. Med. 1, 25 (2013)Google Scholar
  27. 27.
    Sturm, R.: A computer model for the simulation of nanoparticle deposition in the alveolar structures of the human lungs. Ann. Transl. Med. 3, 281 (2015)Google Scholar
  28. 28.
    Tian, L., Shang, Y., Chen, R., Bai, R., Chen, C., Inthavong, K., Tu, J.: A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop. Part. Fibre Toxicol. 14, 24 (2017)CrossRefGoogle Scholar
  29. 29.
    Vafai, K., Tien, C.L.: Boundary and inertia effects on convective mass transfer in porous media. Int. J. Heat Mass Transf. 25, 1183–1190 (1982)CrossRefGoogle Scholar
  30. 30.
    Vafai, K., Tien, C.L.: Boundary and inertia effects on flow and heat transfer in porous media. Int. J. Heat Mass Transf. 24, 195–203 (1981)CrossRefGoogle Scholar
  31. 31.
    Vafai, K.: Convective flow and heat transfer in variable-porosity media. J. Fluid Mech. 47, 233–259 (1984)CrossRefGoogle Scholar

Copyright information

© Springer Nature India Private Limited 2019

Authors and Affiliations

  1. 1.Department of MathematicsIndian Institute of Technology RoorkeeRoorkeeIndia

Personalised recommendations