Advertisement

Modeling Earth Systems and Environment

, Volume 5, Issue 1, pp 159–173 | Cite as

Calibration of seepage analysis sections based on observation well monitoring data: a case study on Darian dam abutments–Kermanshah province, Iran

  • Kamal GanjalipourEmail author
  • Seyed Mahmod Fatemi Aghda
Original Article
  • 26 Downloads

Abstract

Water seepage, after impounding, is among the main problems encountered in dam construction projects. Assessment and prediction of the amount of seepage water can be useful in preventing such incidents. Darian dam has been constructed on Sirvan River in Kermanshah province in west of Iran. This dam, which is currently in impounding state, was built for flooding control and electricity generation purposes. No seepage problem was observed in this dam, but the water level recorded in observation wells in right and left abutments indicated a significant difference with water levels predicted through designing step by numerical analysis using software of SEEP/W. In this study, iso-piezometric map of dam area and its abutments was produced using data obtained from 27 observation wells. Using this map, the actual phreatic line (underground water level) along the seepage analysis sections at design time was extracted. Then, the actual curve of water level was compared with the curve of water level obtained from the SEEP/W. Using the actual curve of underground water and geological features, rock masses in the seepage analysis sections were divided into hydrogeological sub-units. The main objective of the study was to overlap the computed phreatic line and actual underground water level on the basis of observation wells by changing the permeability of the hydrogeological sub-units in the software of SEEP/W, and to compare the permeability of the units relative to each other in real situation and design time. In this regard, in the right abutment, the permeability of all units was expressed as a proportion of permeability of unit Li (k/kli). Similarly, in the left abutment the ratio k/klml was calculated for all units. This relative expression allow calibrating of seepage analysis section by using the data from underground water level, even when the amount of seepage in rock masses is not known.

Keywords

Observation well Seepage analysis Underground water level Permeability 

References

  1. Aghanabati SA (2006) Geology of Iran: Geological Survey of Iran, p 586 (in Persian)Google Scholar
  2. Aubertin M, Bussière B, Aachib M, Chapuis RP, Crespo R (1996) Unemodélisation numériquedes écoulements non saturésdans les couverturesmulticouches en sols. Hydrogéologie 96(1):3–13Google Scholar
  3. Cedergren HR (1989) Seepage, drainage, and flow nets, 3rd edn. Wiley, New York, p 465Google Scholar
  4. Chapuis RP, Aubertin M (2002) A simplified method to estimate saturated and unsaturated seepage through dikes under steady-state conditions. Can Geotech J 38:1321–1328CrossRefGoogle Scholar
  5. Chuanfang KE, Yong H (2010) Study on anti-seepage effect of Xiongjiagang earth-rock dam based on cut-off wall schemes. Sci Innov Acad Front Online J 134(4):548–552Google Scholar
  6. Cook PG (2003) A guide to regional groundwater flow in fractured rock aquifers. CSIRO Land and Water, Seaview Press, Henley Beach, South Australia, p 108Google Scholar
  7. Dunnicliff J, Green GE (1988) Geotechnical instrumentation for monitoring field performance. Wiley, New YorkGoogle Scholar
  8. Fell R, MacGregor P, Stapledon D (1992) Geotechnical engineering of embankment dams. A.A. BALKEMA, Rotterdam, 684 ppGoogle Scholar
  9. Jie L (1990) Review and prospect of development of seepage control technique for earth Dams and earth-Rockfill Dams [J]. Yellow River 1:8Google Scholar
  10. Johansson S, Dahlin T (1996) Seepage monitoring in an earth embankment dam by repeated resistivity measurements. Euro J Eng Geophys 1:229–247CrossRefGoogle Scholar
  11. GEO-SLOPE., 2007. Seepage modeling with SEEP/W. GEO-SLOPE International Ltd. Calgary, 263–280Google Scholar
  12. Kamanbedast AB, Norbakhsh A, Aghamajidi R (2010) Seepage Analysis of earth dams with using SEEP/W Software Case study: Karkheh dam. World Acad Sci Eng Technol, 69, 1272–1277Google Scholar
  13. Krahn J (2004) Seepage modeling with SEEP/W: an engineering methodology. GEO-SLOPE International Ltd. Calgary, 207Google Scholar
  14. Liu GR, Quek SS (2003) Finite element method. A practical course. Butterworth-Heinemann, BurlingtonGoogle Scholar
  15. Mahab Ghods Consulting Engineers (2008) Engineering geology report on Darian dam. Tehran, Iran, 100 (in Persian)Google Scholar
  16. Mancebo Piqueras J, Perez S. E., and Menendez-Pidal. I (2012) Water seepage beneath dams on soluble evaporite deposits: a laboratory and field study (Caspe Dam, Spain). Bull Eng Geol Env 71(2):201–213CrossRefGoogle Scholar
  17. NazariGiglou A, Zeraatparvar A (2012) Seepage estimation through earth dams. J Basic Appl Sci Res 2(8):7861–7865Google Scholar
  18. Papagiannakis AT, Fredlund DG (1984) A steady state model for flow in saturated-unsaturated soils. Can Geotech J 21:419–430CrossRefGoogle Scholar
  19. Richards LA (1931) Capillary conduction of liquids through porous mediums. Phys (New York), 1:318–333Google Scholar
  20. Sadrekarimi J, Kiyani M, Fakhri B, Vahdatirad MJ, Barari A (2011) Seepage analysis of upper Gotvanddam concerning gypsum karstification (2D and 3D approaches). Front Architecture Civil Eng China 5(1):71–78CrossRefGoogle Scholar
  21. Shi W, Zheng Y, Tang B (2003) Discussion on stability analysis method for landslides. Rock Soil Mechanics-Wuhan 24(4):545–548Google Scholar
  22. Singh B, Varshney RS (1995) Engineering for embankment dams. A.A. BALKEMA, Rotterdam, 732 ppGoogle Scholar
  23. Mirghasemi AA, Tarkeshdooz N, Daadgostarnia S (2000) Pore pressure monitoring within foundation and impervious zone of Karkheh Dam during construction. In: Int. Con. Large dams, vol 3, Beijing, pp 259–279, pro.20Google Scholar
  24. Pimenta L, Silva Gomes A (2000) Monte Da rocha dam analysis of monitoring results. In: Proc. 20th. Int Con. Large Dams, vol 3, Beijing, pp 347–367Google Scholar
  25. Rattue DA, Hammanji Y, Tournier JP (2000) Performance of the sainte marguerite-3 dam during construction and reservoir filling. In: Proc. 20th. Int Con. Large Dams, vol 3, Beijing, pp 899–915Google Scholar
  26. Uromeihy A, Barzegari G (2007) Evaluation and treatment of seepage problems at Chapar-Abad dam. Iran Eng Geol 91(2):219–228CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  1. 1.Department of Applied Geology, Faculty of Geological ScienceKharazmi UniversityTehranIran

Personalised recommendations