Experimental Study on Tribological Characteristics of Steel Alloys for CNC Bending Machine
- 21 Downloads
In this paper, the contact phenomenon of meshing of sliding gear tooth used in planetary gear train (PGT) of CNC bending machine is simulated to estimate the coefficient of friction (COF), frictional force (FF) and wear rate of various steel alloys. Planetary gear systems continually transmit highest torque and reduction ratio. In this work, the experiments are performed on a pin-on-disk apparatus to estimate tribological characteristics of different gear materials with different loading conditions. Pins were mounted in a pin holder and fed against a rotating disk at a required speed. The trials were performed on a group of steels alloys for duration of 5 min for load of 50 N and 100 N with disk speed of 350 rpm. The results show that the COF varies with duration of rubbing and normal load. In general, COF increases for a certain duration of rubbing and after that it remains constant for the rest of the experimental time. The wear of carbon steel is significantly reduced due to more carbon content. Hence, it becomes imperative to analyze the wear characteristics of different types of steel materials, particularly EN8, 20MnCr5, EN19, EN24 and M.S. sliding against EN-31 disk on a case-to-case basis in order to arrive at a more realistic assessment of friction and wear performance.
KeywordsPin-on-disk machine Friction and wear Material properties Gear steels
Authors would like to thanks to Mr. S. B. Nandeppagoudar, Managing Director of M/s. Naveen Hydro-Controls, Pune, Maharashtra, India, for providing required technical support.
Compliance with Ethical Standards
Conflict of interest
The authors declare that there is no conflict of interests regarding the publication of this paper.
- 1.Zhang Z (2001) Gear failure and counter measures. China Machine Press, BeijingGoogle Scholar
- 2.Sosnovskiy LA, Wanzhen G (2000) Tribo-fatigue. In proceedings of 3rd international symposium on Tribo-Fatigue, Beijing, 2000, pp 1–11Google Scholar
- 3.Godse RS, Gawande SH, Keste AA (2016) Tribological behaviour of high fraction carbon steel alloys. J Bio-Tribo-Corros 2(3):1–9Google Scholar
- 4.Charool MS, Wani MF, Hanief M, Chetani A, Rather MA (2017) Tribological characteristics of EN8 and EN24 steel against aluminium alloy 6061 under lubricated condition. Adv Mater Proc 2(7):1–6Google Scholar
- 5.Sekunowo OI, Nwagu OI (2014) Wear characteristics of carburised mild steel. Int J Sci Technol Res 3(9):1–7Google Scholar
- 9.Sardar J, Bandopadhya D (2014) Evaluation of wear behavior of a nonmetallic spur gear. 5th international & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), pp 1–6Google Scholar
- 11.Li X (2016) Efficiency and wear properties of spur gears made of powder metallurgy materials, Doctoral thesis No. 2016:04, KTH Royal Institute of Technology, Industry Engineering and Management, Department of Machine Design, SE-100 44 Stockholm pp 1–125Google Scholar
- 12.Md Ghazali WB, Bin Daing Idris DMN, Bin Sofian AH, Bin Basrawi MF, Ibrahim TK (2017) Investigation on wear characteristic of biopolymer gear. Int Conf Mech Eng Res (ICMER) 257:1–10Google Scholar
- 18.Abdo J, Tahat M (2008) The effect of frequency and amplitude of vibration on the coefficient of friction for metals. WSEAS Trans Appl Theor Mech 7(3):265–274Google Scholar
- 19.Seidel B, Wagner A, Brinksmeier E (2017) Improving the tribological properties of gear synchronizations by adjusting the metalworking fluid composition of the grinding process. J Manuf Mater Proc 1(4):1–11Google Scholar
- 20.Höhn BR, Michaelis K, Weiss R (2001) Influence of lubricant ageing on gear performance. Materialy 2:263Google Scholar
- 21.Schultheiss H, Stemplinger JP, Tobie T, Stahl K (2016) Influences on failure modes and load carrying capacity of grease lubricated gears. Gear Technol 42–47Google Scholar