Advertisement

Thermal Storage Effect Analysis of Floor Heating Systems Using Latent Heat Storage Sheets

  • Beom Yeol Yun
  • Sungwoong Yang
  • Hyun Mi Cho
  • Seunghwan Wi
  • Sumin KimEmail author
Regular Paper
  • 81 Downloads

Abstract

The thermal energy storage (TES) is an energy storage method implemented to reduce the heating energy consumption of buildings by utilizing a high-efficiency heating system and a TES system. Therefore, in this study, a TES system is applied to a high-efficient floor heating system. Various methods are available to utilize the sensible heat and latent heat for TES, and a phase change material (PCM) that can store the latent heat is used in this study. The PCM is used in the form of a heat storage sheet. The physical property analysis results show that the phase change interval of the PCM was 17–32 °C, the latent heat amount was 40.39 J/g, and the specific heat was 1.5 J/(g K). The dynamic heat analysis confirmed the peak temperature rise during heating, and the maximum value at the surface was 1.04 °C. In addition, during cooling, a cooling delay time of up to 5 h was observed due to the heat storage effect of the PCM. Therefore, it is possible to store thermal energy by using a material called PCM, and the saved heat energy can reduce the heating energy requirement of buildings.

Keywords

Dynamic thermal analysis Phase change materials Thermal energy storage Thermal heat storage 

List of Symbols

Q

Heat flow (W)

K

Heat transfer coefficient (W/(m2 °C))

A

Heat transfer area (m2)

dT

Temperature difference (°C)

Notes

Acknowledgements

This research was supported by a grant (19RERP-B082204-06) from Residential Environment Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. The authors would like to express their gratitude to the DIC Corporation for providing heat storage sheet applied in the experimental setup.

References

  1. 1.
    Dong, K. Y., Sun, R. J., Li, H., & Jiang, H. D. (2017). A review of China’s energy consumption structure and outlook based on a long-range energy alternatives modeling tool. Petroleum Science, 14(1), 214–227.CrossRefGoogle Scholar
  2. 2.
    Lee, G., Park, B., & Lee, W. (2017). Microstructure and property characterization of flexible syntactic foam for insulation material via mold casting. International Journal of Precision Engineering and Manufacturing-Green Technology, 4, 169–176.CrossRefGoogle Scholar
  3. 3.
    Huo, T., Ren, H., & Cai, W. (2019). Estimating urban residential building-related energy consumption and energy intensity in China based on improved building stock turnover model. Science of the Total Environment, 650, 427–437.CrossRefGoogle Scholar
  4. 4.
    Kim, J. M., Park, Y. J., Son, K., & Kim, Y. J. (2018). Public housing lifecycle cost analysis for optimal insulation standards in South Korea. Energy and Buildings, 161, 55–62.CrossRefGoogle Scholar
  5. 5.
    Directive, E. E. (2012). Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32. Official Journal, L, 315, 1–56.Google Scholar
  6. 6.
    Huo, T., Cai, W., Ren, H., Feng, W., Zhu, M., et al. (2019). China’s building stock estimation and energy intensity analysis. Journal of Cleaner Production, 207, 801–813.CrossRefGoogle Scholar
  7. 7.
    Suh, H. S., & Kim, D. D. (2019). Energy performance assessment towards nearly zero energy community buildings in South Korea. Sustainable Cities and Society, 44, 488–498.CrossRefGoogle Scholar
  8. 8.
    Silvero, F., Rodrigues, F., Montelpare, S., Spacone, E., & Varum, H. (2019). The path towards buildings energy efficiency in South American countries. Sustainable Cities and Society, 44, 646–665.CrossRefGoogle Scholar
  9. 9.
    Zhou, X., Yan, D., An, J., Hong, T., Shi, X., et al. (2018). Comparative study of air-conditioning energy use of four office buildings in China and USA. Energy and Buildings, 169, 344–352.CrossRefGoogle Scholar
  10. 10.
    Ürge-Vorsatz, D., Cabeza, L. F., Serrano, S., Barreneche, C., & Petrichenko, K. (2015). Heating and cooling energy trends and drivers in buildings. Renewable and Sustainable Energy Reviews, 41, 85–98.CrossRefGoogle Scholar
  11. 11.
    Xiang, C., & Tian, Z. (2013). Impact of climate change on building heating energy consumption in Tianjin. Frontiers in Energy, 7(4), 518–524.CrossRefGoogle Scholar
  12. 12.
    Jiang, Y., & Zhou, S. (2007). The unit fuel consumption analysis and energy saving of the building heating. In K. Cen, Y. Chi, & F. Wang (Eds.), Challenges of power engineering and environment (pp. 1324–1327). Berlin: Springer.CrossRefGoogle Scholar
  13. 13.
    Naylor, S., Gillott, M., & Lau, T. (2018). A review of occupant-centric building control strategies to reduce building energy use. Renewable and Sustainable Energy Reviews, 96(August), 1–10.CrossRefGoogle Scholar
  14. 14.
    Beradi, U., & Naldi, M. (2017). The impact of the temperature dependent thermal conductivity of insulating materials on the effective building envelope performance. Energy and Buildings, 144, 262–275.CrossRefGoogle Scholar
  15. 15.
    Nosrati, R. H., & Beradi, U. (2018). Hygrothermal characteristics of aerogel-enhanced insulating materials under different humidity and temperature conditions. Energy and Buildings, 158, 698–711.CrossRefGoogle Scholar
  16. 16.
    Berardi, U., & Nosrati, R. H. (2018). Long-term thermal conductivity of aerogel-enhanced insulating materials under different laboratory aging conditions. Energy, 147, 1188–1202.CrossRefGoogle Scholar
  17. 17.
    Li, N., Luo, G. Z., Li, B. Z., & Huang, Y. Q. (2012). Impact of light-weight external thermal insulation materials on building surrounding thermal environment in summer. Journal of Central South University of Technology (English Edition), 19(6), 1639–1644.CrossRefGoogle Scholar
  18. 18.
    Chel, A., & Kaushik, G. (2018). Renewable energy technologies for sustainable development of energy efficient building. Alexandria Engineering Journal, 57(2), 655–669.CrossRefGoogle Scholar
  19. 19.
    Luo, M., Arens, E., Zhang, H., Ghahramani, A., & Wang, Z. (2018). Thermal comfort evaluated for combinations of energy-efficient personal heating and cooling devices. Building and Environment, 143(July), 206–216.CrossRefGoogle Scholar
  20. 20.
    Truong, N. Le, & Gustavsson, L. (2014). Cost and primary energy efficiency of small-scale district heating systems. Applied Energy, 130, 419–427.CrossRefGoogle Scholar
  21. 21.
    Köysal, Y. (2019). Performance analysis on solar concentrating thermoelectric generator coupled with heat sink. International Journal of Precision Engineering and Manufacturing, 20, 313–318.CrossRefGoogle Scholar
  22. 22.
    Kang, S. (2019). Au nanoparticle array deposited phase-change material for optical information recording using field enhancement based on localized surface plasmon resonance. International Journal of Precision Engineering and Manufacturing, 20, 267–272.CrossRefGoogle Scholar
  23. 23.
    Werner, S. (2017). International review of district heating and cooling. Energy, 137, 617–631.CrossRefGoogle Scholar
  24. 24.
    Jamil, H., Alam, M., Sanjayan, J., & Wilson, J. (2016). Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building. Energy and Buildings, 133, 217–229.CrossRefGoogle Scholar
  25. 25.
    Berardi, U., & Soudian, S. (2019). Experimental investigation of latent heat thermal energy storage using PCMs with different melting temperatures for building retrofit. Energy and Buildings, 185, 180–195.CrossRefGoogle Scholar
  26. 26.
    Tang, Y., Alva, G., Huang, X., Su, D., Liu, L., et al. (2016). Thermal properties and morphologies of MA-SA eutectics/CNTs as composite PCMs in thermal energy storage. Energy and Buildings, 127, 603–610.CrossRefGoogle Scholar
  27. 27.
    Xie, J., Wang, W., Liu, J., & Pan, S. (2018). Thermal performance analysis of PCM wallboards for building application based on numerical simulation. Solar Energy, 162(January), 533–540.CrossRefGoogle Scholar
  28. 28.
    Alawadhi, E. M., & Alqallaf, H. J. (2011). Building roof with conical holes containing PCM to reduce the cooling load: Numerical study. Energy Conversion and Management, 52(8–9), 2958–2964.CrossRefGoogle Scholar
  29. 29.
    Mannivannan, A., Jaffarsathiq, A., & Sadhana, M. T. (2015). Simulation and experimental study of thermal performance of a building roof with a phase change material (PCM). Sadhana - Academy Proceedings in Engineering Sciences, 40(8), 2381–2388.Google Scholar
  30. 30.
    Cerón, I., Neila, J., & Khayet, M. (2011). Experimental tile with phase change materials (PCM) for building use. Energy and Buildings, 43(8), 1869–1874.CrossRefGoogle Scholar
  31. 31.
    Boussaba, L., Foufa, A., Makhlouf, S., Lefebvre, G., & Royon, L. (2018). Elaboration and properties of a composite bio-based PCM for an application in building envelopes. Construction and Building Materials, 185, 156–165.CrossRefGoogle Scholar
  32. 32.
    Cheng, W. L., Zhang, R. M., Xie, K., Liu, N., & Wang, J. (2010). Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal properties. Solar Energy Materials and Solar Cells, 94(10), 1636–1642.CrossRefGoogle Scholar
  33. 33.
    Lee, J., Wi, S., Jeong, S. G., Chang, S. J., & Kim, S. (2017). Development of thermal enhanced n-octadecane/porous nano carbon-based materials using 3-step filtered vacuum impregnation method. Thermochimica Acta, 655(June), 194–201.CrossRefGoogle Scholar
  34. 34.
    Bontemps, A., Ahmad, M., Johanns, K., & Sallée, H. (2011). Experimental and modelling study of twin cells with latent heat storage walls. Energy and Buildings, 43(9), 2456–2461.CrossRefGoogle Scholar
  35. 35.
    Jin, X., Medina, M. A., & Zhang, X. (2013). On the importance of the location of PCMs in building walls for enhanced thermal performance. Applied Energy, 106, 72–78.CrossRefGoogle Scholar
  36. 36.
    Konuklu, Y., Ostry, M., Paksoy, H. O., & Charvat, P. (2015). Review on using microencapsulated phase change materials (PCM) in building applications. Energy and Buildings, 106, 134–155.CrossRefGoogle Scholar
  37. 37.
    Park, S., Lee, Y., Kim, Y. S., Lee, H. M., Kim, J. H., et al. (2014). Magnetic nanoparticle-embedded PCM nanocapsules based on paraffin core and polyurea shell. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 450(1), 46–51.CrossRefGoogle Scholar
  38. 38.
    Zheng, X., Han, Y., Zhang, H., Zheng, W., & Kong, D. (2017). Numerical study on impact of non-heating surface temperature on the heat output of radiant floor heating system. Energy and Buildings, 155, 198–206.CrossRefGoogle Scholar
  39. 39.
    Zhang, W., Dehghani-Sanij, A. A., & Blackburn, R. S. (2008). IR study on hydrogen bonding in epoxy resin-silica nanocomposites. Progress in Natural Science, 18(7), 801–805.CrossRefGoogle Scholar
  40. 40.
    Yu, S., Wang, X., & Wu, D. (2014). Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: Synthesis, microstructure, and performance evaluation. Applied Energy, 114, 632–643.CrossRefGoogle Scholar
  41. 41.
    Matheson, C. D., & McCollum, A. J. (2014). Characterising native plant resins from Australian Aboriginal artefacts using ATR-FTIR and GC/MS. Journal of Archaeological Science, 52, 116–128.CrossRefGoogle Scholar
  42. 42.
    Devaux, P., & Farid, M. M. (2017). Benefits of PCM underfloor heating with PCM wallboards for space heating in winter. Applied Energy, 191, 593–602.CrossRefGoogle Scholar
  43. 43.
    Cheng, W., Xie, B., Zhang, R., Xu, Z., & Xia, Y. (2015). Effect of thermal conductivities of shape stabilized PCM on under-floor heating system. Applied Energy, 144, 10–18.CrossRefGoogle Scholar
  44. 44.
    Mazo, J., Delgado, M., Marin, J. M., & Zalba, B. (2012). Modeling a radiant floor system with Phase Change Material (PCM) integrated into a building simulation tool: Analysis of a case study of a floor heating system coupled to a heat pump. Energy and Buildings, 47, 458–466.CrossRefGoogle Scholar
  45. 45.
    Yun, B. Y., Yang, S., Cho, H. M., Chang, S. J., & Kim, S. (2019). Design and analysis of phase change material based floor heating system for thermal energy storage. Environmental Research, 173, 480–488.CrossRefGoogle Scholar

Copyright information

© Korean Society for Precision Engineering 2019

Authors and Affiliations

  • Beom Yeol Yun
    • 1
  • Sungwoong Yang
    • 1
  • Hyun Mi Cho
    • 1
  • Seunghwan Wi
    • 1
  • Sumin Kim
    • 1
    Email author
  1. 1.Department of Architecture and Architectural EngineeringYonsei UniversitySeoulRepublic of Korea

Personalised recommendations