Correction to: An efficient and stabilised SPH method for large strain metal plastic deformations

The Original Article was published on 24 August 2019

Correction to: Computational Particle Mechanics https://doi.org/10.1007/s40571-019-00277-6

The typesetting process incorrectly introduced a “\(\nabla \)” symbol inside the “Time-stepping the solution” box at the end of paragraph 4.3, directly under the “Compute first Piola-Kirchhoff stress tensor Pi” line. The correct version should read as “Given initial C(p) , J and \(\epsilon (p)\)”.

The original article has been corrected.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Giorgio Greto.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Greto, G., Kulasegaram, S. Correction to: An efficient and stabilised SPH method for large strain metal plastic deformations. Comp. Part. Mech. 7, 541 (2020). https://doi.org/10.1007/s40571-019-00292-7

Download citation