Advertisement

Friction

pp 1–14 | Cite as

An explicit solution to a three-dimensional wedge problem considering two edges effect

  • L. Guo
  • Z. M. Zhang
  • W. Wang
  • Y. Zhao
  • P. L. WongEmail author
Open Access
Research Article
  • 25 Downloads

Abstract

The paper presents an explicit matrix algorithm to solve the problem of an elastic wedge with three loaded surfaces. The algorithm makes use of a recently published concept of transformation matrix, by which the original surface loads are converted to equivalent loads in half-space. The three loaded edges are considered simultaneously. The developed algorithm is used to study the effects of two free edges of a steel block and tapered rollers with different contact angles. The two load-free edges can substantially increase deformation if the two edges are close in distance. The results of the tapered roller simulation show that deformation is considerably sensitive to the contact angle of the tapered roller. The largest deformation appears at the big end of the roller. Furthermore, empirical formulae for correction factors for the calculation of block or quarter-space deformation based on half-space solutions are summarized.

Keywords

contact mechanics two edge surfaces finite line contact tapered roller contact 

Notes

Acknowledgements

This research is completely supported by the Research Grants Council of Hong Kong (Project No. CityU11213914).

References

  1. [1]
    Zhang C, Gu L, Mao Y Z, Wang L Q. Modeling the factional torque of a dry-lubricated tapered roller bearing considering the roller skewing. Friction (2018) doi:  https://doi.org/10.1007/s40544-018-0232-8 (in Press)Google Scholar
  2. [2]
    Koshy M, Gohar R. Pressure distribution on radially loaded rollers. In Proceedings of the 18th International Machine Tool Design and Research, 1977: 595–604.Google Scholar
  3. [3]
    Johns P M, Gohar R. Roller bearings under radial and eccentric loads. Tribol Int 14(3): 131–136 (1981)CrossRefGoogle Scholar
  4. [4]
    Rahnejat H, Gohar R. Design of profiled taper roller bearings. Tribol Int 12(6): 269–75 (1979)CrossRefGoogle Scholar
  5. [5]
    Hartnett M J. The analysis of contact stresses in rolling element bearings. J Lubr Technol 101(1): 105–109 (1979)CrossRefGoogle Scholar
  6. [6]
    Kannel J W. Comparison between predicted and measured axial pressure distribution between cylinders. J Lubr Technol 96(3): 508–514 (1974)CrossRefGoogle Scholar
  7. [7]
    Zantopulos H. The effect of misalignment on the fatigue life of tapered roller bearings. J Lubr Technol 94(2): 181–186 (1972).CrossRefGoogle Scholar
  8. [8]
    Stejskal E O, Cameron A. Optical interferometry study of film formation in lubrication of sliding and/or rolling contacts. NASA Lewis Research Center, 1972.Google Scholar
  9. [9]
    Wymer D G. Elastohydrodynamic lubrication of a rolling line contact. Ph.D Thesis. London (England): University of London, 1972.Google Scholar
  10. [10]
    Wymer D G, Cameron P A. Elastohydrodynamic lubrication of a line contact. Proc Inst Mech Eng 188(1): 221–238 (1974)CrossRefGoogle Scholar
  11. [11]
    Wang Z J, Shen X J, Chen X Y, Tao D H, Shi L, Liu S B. Experimental investigation of EHD grease lubrication in finite line contacts. Friction (2018) doi:  https://doi.org/10.1007/s40544-018-0208-8 (in Press)
  12. [12]
    Bahadoran H, Gohar R. Research note: End closure in elastohydrodynamic line contact. J Mech Eng Sci 16(4): 276–278 (1974)CrossRefGoogle Scholar
  13. [13]
    Mostofi A, Gohar R. Elastohydrodynamic lubrication of finite line contacts. J Lubr Technol 105(4): 598–604 (1983)CrossRefGoogle Scholar
  14. [14]
    Park T J, Kim K W. Elastohydrodynamic lubrication of a finite line contact. Wear 223(1–2): 102–109 (1998)CrossRefGoogle Scholar
  15. [15]
    Kushwaha M, Rahnejat H, Gohar R. Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctions. Proc Inst Mech Eng Part C: J Mech Eng Sci 216(11): 1051–1070 (2002)CrossRefGoogle Scholar
  16. [16]
    Kushwaha M, Rahnejat H. Transient concentrated finite line roller-to-race contact under combined entraining, tilting and squeeze film motions. J Phys D: Appl Phys 37(14): 2018–2034 (2004)CrossRefGoogle Scholar
  17. [17]
    Liu X L, Yang P R. Analysis of the thermal elastohydrodynamic lubrication of a finite line contact. Tribol Int 35(3): 137–144 (2002)CrossRefGoogle Scholar
  18. [18]
    Liu X L, Yang P R. Numerical analysis of the oil-supply condition in isothermal elastohydrodynamic lubrication of finite line contacts. Tribol Lett 38: 115–124 (2010)CrossRefGoogle Scholar
  19. [19]
    Sun H Y, Chen X Y. Thermal EHL analysis of cylindrical roller under heavy load. In IUTAM Symposium on Elastohydrodynamics and Micro-Elastohydrodynamics. Snidle R W, Evans H P, Eds. Dordrecht: Springer, 2006: 107–120.CrossRefGoogle Scholar
  20. [20]
    Zhu D, Wang J X, Ren N, Wang Q J. Mixed elastohy-drodynamic lubrication in finite roller contacts involving realistic geometry and surface roughness. J Tribol 134(1): 011504 (2012)CrossRefGoogle Scholar
  21. [21]
    He T, Wang J X, Wang Z J, Zhu D. Simulation of plasto-elastohydrodynamic lubrication in line contacts of infinite and finite length. J Tribol 137(4): 041505 (2015)CrossRefGoogle Scholar
  22. [22]
    Boussinesq J V. Application Des Potentiels a L’etude de L’equilibre et du Mouvement Des Solides Elastiques. Gautier-Villars (Paris): Impr. L. Danel, 1885.zbMATHGoogle Scholar
  23. [23]
    Love A E H. The stress produced in a semi-infinite solid by pressure on part of the boundary. Philos Trans Roy Soc A, Math Phys Eng Sci 228(659–669): 377–420 (1929)CrossRefzbMATHGoogle Scholar
  24. [24]
    Najjari M, Guilbault R. Edge contact effect on thermal elastohydrodynamic lubrication of finite contact lines. Tribol Int 71: 50–61 (2014)CrossRefGoogle Scholar
  25. [25]
    Guilbault R. A fast correction for elastic quarter-space applied to 3D modeling of edge contact problems. J Tribol 133(3): 031402 (2011)CrossRefGoogle Scholar
  26. [26]
    Wang W, Guo L, Wong P L, Zhang Z M. Surface normal deformation in elastic quarter-space. Tribol Int 114: 358–364 (2017)CrossRefGoogle Scholar
  27. [27]
    Guo L, Wang W, Zhang Z M, Wong P L. Study on the free edge effect on finite line contact elastohydrodynamic lubrication. Tribol Int 116: 482–490 (2017)Google Scholar
  28. [28]
    Zhang Z M, Wang W, Wong P L. An explicit solution for the elastic quarter-space problem in matrix formulation. Int J Solids Struct 50(6): 976–980 (2013)CrossRefGoogle Scholar
  29. [29]
    Zhang H B, Wang W Z, Zhang S G, Zhao Z Q. Elastohy-drodynamic lubrication analysis of finite line contact problem with consideration of two free end surfaces. J Tribol 139(3): 031501 (2017)CrossRefGoogle Scholar
  30. [30]
    Hetényi M. A general solution for the elastic quarter space. J Appl Mech 37(1): 70–76 (1970)CrossRefzbMATHGoogle Scholar
  31. [31]
    Zhang H B, Wang W Z, Zhang S G, Zhao Z Q. Modeling of finite-length line contact problem with consideration of two free-end surfaces. J Tribol 138(2): 021402 (2016)CrossRefGoogle Scholar
  32. [32]
    Guo L, Zhang Z M, Wang W, Wong P L. An explicit matrix algorithm for solving three-dimensional elastic wedge under surface loads Int J Solids Struct 128: 231–242 (2017)CrossRefGoogle Scholar
  33. [33]
    Ahmadi N, Keer L M, Mura T, Vithoontien V. The interior stress field caused by tangential loading of a rectangular patch on an elastic half space. J Tribol 109(4): 627–629 (1987)CrossRefGoogle Scholar
  34. [34]
    Hanson M T, Keer L M. A simplified analysis for an elastic quarter-space. Quart J Mech Appl Math 43(4): 561–587 (1990)MathSciNetCrossRefzbMATHGoogle Scholar

Copyright information

© The author(s) 2019

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Authors and Affiliations

  • L. Guo
    • 1
  • Z. M. Zhang
    • 1
  • W. Wang
    • 1
  • Y. Zhao
    • 2
  • P. L. Wong
    • 2
    Email author
  1. 1.School of Mechatronic Engineering and AutomationShanghai UniversityShanghaiChina
  2. 2.Department of Mechanical EngineeringCity University of Hong KongHong Kong SARChina

Personalised recommendations