Advertisement

Investigation of tool wear in pull boring of pure niobium tubes

  • Xiaolan HanEmail author
  • Zhanfeng LiuEmail author
  • Tianqi Wang
Technical Paper
  • 35 Downloads

Abstract

To improve the surface quality of pure niobium tubes, pull boring can be utilized. However, this type of machining process can result in serious tool wear, tough chips, and poor surface quality. In this study, the cutting tool structure and boring process parameters used to machine pure niobium tubes via the pull boring process were investigated and tool wear was analyzed. The results suggest that unsuitable geometric cutting tool parameters as well as unfavorable boring process parameters can lead to severe wear of the cutter teeth. By adjusting the cutter teeth angle and process parameters, wear of the cutter teeth was significantly reduced and surface roughness of pure niobium tubes was found to be 3.2 μm, which satisfies the surface finish requirements.

Keywords

Pure niobium tube Cutter teeth wear Guide pad wear 

Notes

Acknowledgements

This research was funded by National Science Foundation of China (Grant No. 51675414) and Natural Science Foundation of Shaanxi Province of China (Grant No. 2018JQ5002).

References

  1. 1.
    Wang Q, Zhang PZ, Wei DB, Chen XH, Wang RN, Wang HY, Feng KT (2013) Microstructure and sliding wear behavior of pure titanium surface modified by double-glow plasma surface alloying with Nb. Mater Des 52:265–273.  https://doi.org/10.1016/j.matdes.2013.05.061 CrossRefGoogle Scholar
  2. 2.
    Brady MP, Magee J, Yamamoto Y, Helmick D, Wang L (2014) Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance. Mater Sci Eng A 590:101–115.  https://doi.org/10.1016/j.msea.2013.10.014 CrossRefGoogle Scholar
  3. 3.
    Tajmar M (2012) Advanced space propulsion systems. Springer, New York, p 62Google Scholar
  4. 4.
    Shokrani A, Dhokia V, Newman ST (2012) Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int J Mach Tool Manuf 57:83–101.  https://doi.org/10.1016/j.ijmachtools.2012.02.002 CrossRefGoogle Scholar
  5. 5.
    Stephenson DA, Agapiou JS (2016) Metal cutting theory and practice, 3rd edn. CRC Press, Boca Raton, pp 1–25Google Scholar
  6. 6.
    Malarvizhi S, Chaudhari A, Woon KS, Kumar AS, Rahman M (2016) Influence of burnishing axial interference on hole surface quality in deep hole drilling of Inconel 718. Procedia Manuf 5:1295–1307.  https://doi.org/10.1016/j.promfg.2016.08.101 CrossRefGoogle Scholar
  7. 7.
    Vrabeľ M, Eckstein M, Maňková I (2018) Analysis of the metallography parameters and residual stress induced when producing bolt holes in Inconel 718 alloy. Int J Adv Manuf Tech 96(9):4353–4366.  https://doi.org/10.1007/s00170-018-1902-4 CrossRefGoogle Scholar
  8. 8.
    Mathew NT, Vijayaraghavan L (2016) Drilling of titanium aluminide at different aspect ratio under dry and wet conditions. J Manuf Process 24:256–269.  https://doi.org/10.1016/j.jmapro.2016.09.009 CrossRefGoogle Scholar
  9. 9.
    Mohamad A, Zain AM, Ahmad NBH, Yusof NM, Najarian F (2017) Roundness error study in deep hole drilling of cold mold steel 718. Indian J Eng Mater S 10(13):1–5.  https://doi.org/10.17485/ijst/2017/v10i13/112973 CrossRefGoogle Scholar
  10. 10.
    Kang M, Kim G, Eum K, Park MW, Kim JK (2014) A classification of multi-axis features based on manufacturing process. Int J Precis Eng Manuf 15(6):1255–1263.  https://doi.org/10.1007/s12541-014-0465-z CrossRefGoogle Scholar
  11. 11.
    Liu Z, Liu Y, Han X, Zheng W (2018) Study on super-long deep-hole drilling of titanium alloy. J Appl Biomater Funct 16(1):150–156.  https://doi.org/10.1177/2280800017751491 CrossRefGoogle Scholar
  12. 12.
    Katsuki A, Onikura H, Sajima T, Mohri A, Moriyama T, Hamano Y, Murakami H (2011) Development of a practical high-performance laser-guided deep-hole boring tool: improvement in guiding strategy. Precis Eng 35(2):221–227.  https://doi.org/10.1016/j.precisioneng.2010.12.003 CrossRefGoogle Scholar
  13. 13.
    Siddiquee AN, Khan ZA, Goel P, Kumar M, Agarwal G, Khan NZ (2014) Optimization of deep drilling process parameters of AISI 321 steel using Taguchi method. Procedia Mater Sci 6:1217–1225.  https://doi.org/10.1016/j.mspro.2014.07.195 CrossRefGoogle Scholar
  14. 14.
    Wosniak FA, Polli ML, de Camargo Beltrão PA (2016) Study on tool wear and chip shapes in deep drilling OF AISI 4150 steel. J Braz Soc Mech Sci 38(2):473–480.  https://doi.org/10.1007/s40430-015-0379-4 CrossRefGoogle Scholar
  15. 15.
    Voss R, Seeholzer L, Kuster F, Wegener K (2017) Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP. CIRP J Manuf Sci Technol 18:75–91.  https://doi.org/10.1016/j.cirpj.2016.10.002 CrossRefGoogle Scholar
  16. 16.
    Biermann D, Kirschner M, Eberhardt D (2014) A novel method for chip formation analyses in deep hole drilling with small diameters. Prod Eng 8(4):491–497.  https://doi.org/10.1007/s11740-014-0566-7 CrossRefGoogle Scholar
  17. 17.
    Polli ML, Cardoso MJ (2018) Effects of process parameters and drill point geometry in deep drilling of SAE 4144M under MQL. J Braz Soc Mech Sci 40(3):137.  https://doi.org/10.1007/s40430-018-1062-3 CrossRefGoogle Scholar
  18. 18.
    Zabel A, Heilmann M (2012) Deep hole drilling using tools with small diameters—Process analysis and process design. CIRP Ann 61(1):111–114.  https://doi.org/10.1016/j.cirp.2012.03.002 CrossRefGoogle Scholar
  19. 19.
    Richardson R, Bhatti R (2001) A review of research into the role of guide pads in BTA deep-hole machining. J Mater Process Technol 110(1):61–69.  https://doi.org/10.1016/S0924-0136(00)00733-0 CrossRefGoogle Scholar
  20. 20.
    Biermann D, Abrahams H, Goeke S (2014) Optimization of guide pads for the BTA deep hole drilling of high alloyed steels by microfinishing. Prod Eng 8(1):33–40.  https://doi.org/10.1007/s11740-013-0505-z CrossRefGoogle Scholar

Copyright information

© The Brazilian Society of Mechanical Sciences and Engineering 2019

Authors and Affiliations

  1. 1.Mechanical Engineering CollegeXi’an Shiyou UniversityXi’anChina

Personalised recommendations