Advertisement

Artificial neural network to identify RCCI combustion mathematical model for a heavy-duty diesel engine fueled with natural gas and diesel oil

  • Mojtaba Ebrahimi
  • Mohammad Najafi
  • Seyed Ali Jazayeri
Technical Paper
  • 62 Downloads

Abstract

The aim of this study is to apply the artificial neural network to identify the mathematical model of the combustion of a reactivity-controlled compression ignition (RCCI) engine fueled with natural gas and diesel oil. In this study, a single-cylinder heavy-duty diesel engine is set on operation at 9.4 bar gross indicated mean effective pressure. To implement the identification process, the effects of three control factors, namely the intake temperature, the intake pressure (both at the intake valve closing time), and the single-stage diesel fuel injection timing on the engine performance are assessed. Based on the design of experiments–fractional factorial concept, the randomized treatment combinations of chosen levels from the three selected control factors are employed to simulate the RCCI combustion. According to the engine’s responses derived from the RCCI combustion’s simulation, an artificial neural network is trained directly to identify the mathematical model of the RCCI combustion. The results show that the fractional factorial method is capable to produce an appropriate database for the artificial neural network’s training. Moreover, this method can predict more efficient scenarios in which the engine operation under the RCCI combustion has a desirable behavior. Also, artificial neural network as a powerful tool is effectively capable to predict the range of the excessive combustion noise occurrence, misfire occurrence, and the desirable engine load.

Keywords

RCCI Combustion Natural gas Diesel engine Factorial method Artificial neural network 

Notes

Acknowledgements

Authors would like to thank Dr. Vahid Esfahanian from the University of Tehran, Department of Mechanical Engineering, for giving the authors permission to use an original licensed copy of the AVL Fire software to conduct the simulation in this present work. Also, many sincere thanks go to Dr. Ayatollah Gharehghani from the Science and Research Branch, Islamic Azad University, Department of Mechanical and Aerospace Engineering and Dr. Pourya Jafari from the University of K. N. Toosi, Department of Electrical Engineering for helping the authors to conduct this work.

References

  1. 1.
    Reitz RD, Duraisamy G (2015) Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines. Prog Energy Combust Sci 46:12–71CrossRefGoogle Scholar
  2. 2.
    Paykani A, Kakaee AH, Rahnama P, Reitz RD (2015) Progress and recent trends in reactivity—controlled compression ignition engines. Int J Engine Res 17(5):481–524CrossRefGoogle Scholar
  3. 3.
    Kokjohn SL, Hanson RM, Spliter DA, Reitz RD (2011) Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high- efficiency clean combustion. Int J Engine Res 12(3):209–226CrossRefGoogle Scholar
  4. 4.
    Dempsey AB, Walker NR, Gingrich E, Reitz RD (2014) Comparison of low temperature combustion strategies for advanced compression ignition engines with a focus on controllability. Combust Sci Technol 186(2):210–241CrossRefGoogle Scholar
  5. 5.
    Splitter DA, Wissink M, DelVescovo D, Reitz RD (2014) Improving the understanding of intake and charge effects for increasing RCCI engine efficiency. SAE Int J Engines 7(2):913–928CrossRefGoogle Scholar
  6. 6.
    Kokjohn SL, Musculus MPB, Reitz RD (2015) Evaluating temperature and fuel stratification for heat-release rate control in a reactivity-controlled compression-ignition engine using optical diagnostics and chemical kinetics modeling. Combust Flame 162(6):2729–2742CrossRefGoogle Scholar
  7. 7.
    Splitter DA, Hanson RM, Kokjohn SL, Reitz RD (2011) Reactivity controlled compression ignition (RCCI) heavy-duty engine operation at mid-and high-loads with conventional and alternative fuels. SAE Paper 1:01–0363Google Scholar
  8. 8.
    Dempsey AB, Adhikary BD, Viswanathan S, Reitz RD (2012) Reactivity controlled compression ignition (RCCI) using premixed hydrated ethanol and direct injection diesel. J Eng Gas Turbines Power 134(8):082806–082817CrossRefGoogle Scholar
  9. 9.
    Lim JH, Reitz RD (2013) Improving high efficiency RCCI combustion with diesel and gasoline direct injection (GDI). Proc Inst Mech Eng, Part D, J Automob Eng 227:17–30CrossRefGoogle Scholar
  10. 10.
    Dempsey AB, Walker NR, Reitz RD (2013) Effect of cetane improvers on gasoline, ethanol, and methanol reactivity and the implications for RCCI combustion, SAE Paper 2013-01-1678. SAE Int J Fuels Lubr 6(1):170–187CrossRefGoogle Scholar
  11. 11.
    DelVescovo D, Wang H, Wissink M, Reitz RD (2015) Isobutanol as both low reactivity and high reactivity fuels with addition of di-tert butyl peroxide (DTBP) in RCCI combustion. SAE Int J Fuels Lubr 8(2):329–343CrossRefGoogle Scholar
  12. 12.
    Paykani A, Kakaee AH, Rahnama P, Reitz RD (2015) Effects of diesel injection strategy on natural gas/diesel reactivity controlled compression ignition combustion. Energy 90:814–826CrossRefGoogle Scholar
  13. 13.
    Gharehghani A, Hosseini R, Mirsalim M, Jazayeri SA (2015) An experimental study on reactivity controlled compression ignition engine fueled with biodiesel/natural gas. Energy 89:558–567CrossRefGoogle Scholar
  14. 14.
    Walker NR, Wissink ML, DelVescovo DA, Reitz RD (2015) Natural gas for high- load dual-fuel RCCI in heavy- duty engines. J Energy Res Technol 137(4):1–7Google Scholar
  15. 15.
    Ebrahimi M, Najafi, M, Jazayeri, SA, Mohammadzadeh AR (2017) A detail simulation of reactivity controlled compression ignition combustion strategy in a heavy duty diesel engine run on natural gas/ diesel fuel, In: International Journal of Engine Research, Prepublished September, 12, 2017,  https://doi.org/10.1177/1468087417730486 CrossRefGoogle Scholar
  16. 16.
    Charles RH, Kenneth VT Jr (1999) Fundamental concepts in the design of experiments, 5th edn. Oxford University Press, Inc., New YorkGoogle Scholar
  17. 17.
    Douglas C (2001) Montgomery, design and analysis of experiments, 5th edn. Wiley, New YorkGoogle Scholar
  18. 18.
    Madan M, Gupta JL, Noriyasu H (2003) Static and dynamic neural network: from fundamentals to advanced theory. Wiley, New JerseyGoogle Scholar
  19. 19.
    Parlak A, Islamoglu Y, Yasar H, Egrisogut A (2006) Application of artificial neural network to predict specific fuel consumption and exhaust temperature for a diesel engine. Appl Therm Eng 26:824–828CrossRefGoogle Scholar
  20. 20.
    Nazoktabar M, Jazayeri SA (2015) Using three-input three- output to control a blended fuel HCCI engine. Indian J Fundam Appl Life Sci 5(S2):883–898Google Scholar
  21. 21.
    Splitter DA, Wissink ML, Kokjohn SL, Reitz RD (2012) Effect of compression ratio and piston geometry on RCCI load limits and efficiency. SAE Tech Paper 1:01–0383Google Scholar
  22. 22.
    Rahimi A, Fatehifar E, Khoshbakhti Saray R (2010) Development of an optimized chemical kinetic mechanism for homogeneous charge compression ignition combustion of a fuel blend of N- heptane and natural gas using a genetic algorithm. Proc Inst Mech Eng Part D J Automob Eng 224(9):1141–1159CrossRefGoogle Scholar
  23. 23.
    Gosman AD, Ioannides E (1983) Aspects of computer simulation of liquid- fueled combustor. AIAA 7(6):482–490Google Scholar
  24. 24.
    Naber JD, Reitz RD (1988) Modeling engine spray/ wall impingement. SAE 880107:1–26Google Scholar
  25. 25.
    Dukowicz JK (1979) Quasi- steady droplet change in the presence of convection. Informal report Los Alamos Scientific Laboratory, LA7997-MSGoogle Scholar
  26. 26.
    Liu AB, Reitz RD (1993) Modeling the effects of drop drag and break-up on fuel sprays. SAE 930072:1–13Google Scholar
  27. 27.
    Kunsberg- Sarre CV, Kong SC, Reitz RD Modeling the effects of injector nozzle geometry on diesel sprays, SAE paper, 01–0912Google Scholar
  28. 28.
    Eng JA (2002) Characterization of pressure waves in HCCI combustion, SAE Tech Paper, 01–2859Google Scholar

Copyright information

© The Brazilian Society of Mechanical Sciences and Engineering 2018

Authors and Affiliations

  • Mojtaba Ebrahimi
    • 1
  • Mohammad Najafi
    • 1
  • Seyed Ali Jazayeri
    • 2
  1. 1.Department of Mechanical Engineering, Science and Research BranchIslamic Azad UniversityTehranIran
  2. 2.Department of Mechanical EngineeringK. N. Toosi University of TechnologyTehranIran

Personalised recommendations