Advertisement

Hybrid MPPT Solution for Double-Stage Photovoltaic Inverter

  • Moacyr Aureliano Gomes de BritoEmail author
  • Marcos G. Alves
  • Carlos A. Canesin
Article
  • 2 Downloads

Abstract

This paper presents a hybrid MPPT solution applied at a photovoltaic (PV) distributed generation system. The used single-phase power converter is based on the cascaded association of ZVT boost converter and H6-type inverter, considering grid-tie connection in low voltage. The designed 4.8 kW rated prototype, which is fed by PV panels association, may require boost voltage during daylight period (sunset/sunrise) or during partial shading scenario. However, due to its nominal current values, the resonant ZVT boost converter presents great advantages, considering its low electromagnetic emission, as well as high efficiency values. Furthermore, the H6-type inverter allows the design of grid connecting elements with reduced volume and weight, besides providing low common mode voltage for the PV system. The hybrid MPPT solution consists of an alternative MPPT that may work resident at the DC–DC stage or at the DC–AC stage, depending on the input voltage and it permits the overall system efficiency to increase. Finally, analysis and experimental results are presented, considering the main control algorithms for the application in order to attend IEC standard.

Keywords

ZVT boost H6 inverter Hybrid MPPT Photovoltaic energy 

Notes

Acknowledgements

The authors would like to thank FAPESP and PHB Eletronica for supporting this work development.

References

  1. Baojian, J., Wang, J., & Zhao, J. (2013). High-efficiency single-phase transformerless PV h6 inverter with hybrid modulation method. IEEE Transactions on Industrial Electronics, 60(5), 2104–2115.CrossRefGoogle Scholar
  2. Ben-Yaakov, S., Ivensky, G., Levitin, O., & Treiner, A. (1995). Optimization of the auxiliary switch components in a flying capacitor ZVS PWM converters. In Proceedings of the applied power electronics conference (pp. 503–509).Google Scholar
  3. Ciobotaru, M., Agelidis, V., & Teodorescu, R. (2008). Accurate and lessdisturbing active anti-islanding method based on PLL for grid-connected PV Inverters. In Proceedings of the IEEE power electronics specialists conference (pp. 4569–4576).Google Scholar
  4. de Brito, M. A. G., Galotto, L., Sampaio, L. P., e Melo, G. D. A., & Canesin, C. A. (2013). Evaluation of the main MPPT techniques for photovoltaic applications. IEEE Transactions on Industrial Electronics, 60(3), 1156–1167.CrossRefGoogle Scholar
  5. De Mango, F., Liserre, M., Aquila, A. D., & Pigazo, A. (2006). Overview of anti-islanding algorithms for PV systems. Part I: Passive methods. In Proceedings of the EPE-PEMC (pp. 1878–1883).Google Scholar
  6. Desai, H. P., & Patel, H. K. (2007). Maximum power point algorithm in PV generation: An overview. In Proceedings of the 7th international conference on power electronics and drive systems (pp. 624–630).Google Scholar
  7. Esram, T., & Chapman, P. L. (2007). Comparison of photovoltaic array maximum power point tracking techniques. IEEE Transactions on Energy Conversion, 22(2), 439–449.CrossRefGoogle Scholar
  8. Faranda, R., Leva, S., & Maugeri V. (2008). MPPT techniques for PV systems: Energetic and cost comparison. In Proceedings of the power and energy society general meetingconversion and delivery of electrical energy in the 21st century (pp. 1–6).Google Scholar
  9. Hua, G., Leu, C. S., Jiang, Y., & Lee, F. C. (1994). Novel zero-voltage-transition PWM converter. IEEE Transactions on Power Electronics, 9(2), 213–219.CrossRefGoogle Scholar
  10. Liserre, E. M., Sauter, T., & Hung, J. Y. (2010). Future energy systems: Integrating renewable energy sources into the smart power grid through industrial electronics. IEEE Transactions on Industrial Electronics, 4, 18–37.Google Scholar
  11. Siwakoti, Y. P., & Blaabjerg, F. (2017). Common-ground-type transformerless inverters for single-phase solar photovoltaic systems. IEEE Transactions in Industrial Electronics, 65(3), 2100–2111.CrossRefGoogle Scholar
  12. Spagnuolo, G., Petrone, G., Araujo, S. V., Cecati, C., Friis-Madsen, E., Gubia, E., et al. (2010). Renewable energy operation and conversion schemes: A summary of discussions during the seminar on renewable energy systems. Industrial Electronics Magazine, 4, 38–51.CrossRefGoogle Scholar
  13. Xiaoqiang, G., & Xiaoyu, J. (2016). Hardware-based cascaded topology and modulation strategy with leakage current reduction for transformerless PV systems. IEEE Transactions on Industrial Electronics, 63(12), 7823–7832.CrossRefGoogle Scholar
  14. Yu, W., Lai, J., Qian, H., & Hutchens, C. (2011). High-efficiency MOSFET inverter with H6-type configuration for photovoltaic nonisolated ac-module applications. IEEE Transactions on Power Electronics, 26(4), 1253–1260.CrossRefGoogle Scholar

Copyright information

© Brazilian Society for Automatics--SBA 2019

Authors and Affiliations

  • Moacyr Aureliano Gomes de Brito
    • 1
    Email author
  • Marcos G. Alves
    • 2
  • Carlos A. Canesin
    • 2
  1. 1.Department of Electrical Engineering – DELFederal University of Mato Grosso do SulCampo GrandeBrazil
  2. 2.São Paulo State UniversityIlha SolteiraBrazil

Personalised recommendations