Evidence-Based Design of Fixed-Dose Combinations: Principles and Application to Pediatric Anti-Tuberculosis Therapy
- 1.8k Downloads
Background and Objectives
Fixed-dose combination formulations where several drugs are included in one tablet are important for the implementation of many long-term multidrug therapies. The selection of optimal dose ratios and tablet content of a fixed-dose combination and the design of individualized dosing regimens is a complex task, requiring multiple simultaneous considerations.
In this work, a methodology for the rational design of a fixed-dose combination was developed and applied to the case of a three-drug pediatric anti-tuberculosis formulation individualized on body weight. The optimization methodology synthesizes information about the intended use population, the pharmacokinetic properties of the drugs, therapeutic targets, and practical constraints. A utility function is included to penalize deviations from the targets; a sequential estimation procedure was developed for stable estimation of break-points for individualized dosing. The suggested optimized pediatric anti-tuberculosis fixed-dose combination was compared with the recently launched World Health Organization-endorsed formulation.
The optimized fixed-dose combination included 15, 36, and 16% higher amounts of rifampicin, isoniazid, and pyrazinamide, respectively. The optimized fixed-dose combination is expected to result in overall less deviation from the therapeutic targets based on adult exposure and substantially fewer children with underexposure (below half the target).
The development of this design tool can aid the implementation of evidence-based formulations, integrating available knowledge and practical considerations, to optimize drug exposures and thereby treatment outcomes.
Development of a tool for the evidence-based design of combination tablets, integrating available knowledge on pharmacokinetics, population characteristics, and practical considerations.
A pediatric anti-tuberculosis fixed-dose combination was designed as a motivating example, and compared with a World Health Organization-endorsed product currently in clinical trials.
This tool can aid the medical community to move away from dosing schedules following the outdated constant milligram/kilogram principle, and instead strive for rational knowledge-based designs.
The combination of several drugs in a fixed-dose combination (FDC) formulation is known to increase compliance in long-term multi-drug therapy [1, 2]. Fixed-dose combinations can apart from reducing the pill burden, also simplify the prescription procedure and the distribution chain in the healthcare system . It is also suggested that FDCs decrease the risk of resistance development in the treatment of infectious diseases by preventing monotherapy [3, 4, 5], but formulations can naturally not overcome inter-individual variability in pharmacokinetics, which may also drive resistance development . Fixed-dose combinations are used in a range of disease areas, such as hypertension , diabetes mellitus , human immunodeficiecny virus , and tuberculosis (TB) . Drawbacks of FDCs are potential issues with pharmaceutical formulations [11, 12], and decreased flexibility of dosing. It is a complex task to design FDCs; choosing the optimal amount of each compound in one FDC and selecting cut-off values for potential covariate-based individualized dosing demand multiple simultaneous considerations.
The goal of dose individualization is usually to obtain similar exposures, and thereby similar responses, across a diverse population. A common variable for the adjustment of dose to individual patients is their size generally described by body weight, and this is particularly important for children. The traditional approach, which remains widely used, is constant milligram/kilogram-based dosing . However, because the relationship between drug clearance and body weight is not linear but rather allometric [13, 14, 15, 16], this approach is known to lead to under-dosing of children [17, 18, 19, 20]. It is also well established that developmental processes, e.g., maturation of liver enzymes, will affect the pharmacokinetics in infants and toddlers [14, 21]. The rational method for individualized doses is to consider the actual relationship between possible individualization variable(s) and the pharmacokinetic (PK) parameters determining the exposure [22, 23].
In this work, we present a method for evidence-based selection of drug content and corresponding individualized dosing for FDCs, using the existing knowledge of pharmacokinetics described by pharmacometric models, incorporating covariate relationships such as size and age. The work builds on earlier presented methods for dose individualization of single compounds where the optimal regimen is selected by minimizing a defined utility function [22, 24]. The methodology was here extended to encompass multiple drugs simultaneously, and the estimation procedure was refined.
We applied our method to the design of pediatric FDCs of the first-line anti-TB drugs. In 2015, one million children (aged <15 years) developed TB and, even though effective treatment exists, 210,000 died . The intensive phase of first-line anti-TB treatment includes three or four drugs: rifampicin, isoniazid, and pyrazinamide with the addition of ethambutol in settings with high levels of isoniazid resistance and/or high human immunodeficiency virus prevalence . The World Health Organization (WHO) recommends the use of FDCs in the treatment of TB , but until the end of 2015 there were no formulations designed to deliver the drugs according to WHO’s current milligram/kilogram dosing guidelines of the first-line anti-TB drugs in children [26, 28]. As an interim measure, the WHO provided advice on how to use the available formulations to dose children, but dosing was cumbersome . Recently, a WHO-endorsed pediatric anti-TB FDC has been launched , and is currently being tested in the SHINE study investigating treatment shortening for children with non-severe, symptomatic but smear-negative pulmonary TB . The drug content, ratios, and weight banding were selected to achieve milligram/kilogram doses of each drug close to the WHO recommendations with as little variability over the weight range as possible . In the last section of this work, we compare the exposures expected with the suggested optimized FDC to those expected with the WHO-recommended FDC.
The components of the methodology for optimized FDC design are listed in information box 1 . The main principle of the approach we propose is to simultaneously estimate the amount of each compound in one tablet and the values of the individualization variable (IV) at which the number of administered tablets should be changed [i.e., the break-points (BPs)]. This is done by minimizing a utility function accounting for the defined targets, PK models, intended use population, and constraints. Minimizing the utility function entails finding the drug amounts and BPs resulting in the overall lowest deviation in exposure from the target, where the importance of the deviation is weighted by the chosen penalty function. For the population of interest, a large (>10,000) dataset with representative covariates of importance for the PK models is needed. Based on the inter-individual variability predicted by the PK models, individual parameters defining the exposure of each drug can be simulated and included in the population dataset. This serves as the input to the FDC optimization procedure.
Estimation of BPs, which are discontinuous in nature, can be difficult and sensitive to initial estimates. The evaluated approaches to represent a BP are described in the Electronic Supplementary Material (ESM). Estimation and simulation were performed with the software NONMEM Version 7.3 (ICON Development Solutions, Ellicott City, MD, USA). Both gradient-based and expectation-maximization algorithms were evaluated . R (R Foundation for Statistical Computing, Vienna, Austria) was used for data management, post-processing of results, and plotting .
Information box 1. Components of the optimization methodology
Population A description of the population intended to use the fixed-dose combination including relevant covariates and the covariance between them
Pharmacokinetic models Population pharmacokinetic models of each compound describing the typical dose–concentration relationship, influence of covariates, and random inter-individual variability. Potential PK drug–drug interactions should be accounted for
Therapeutic targets Pharmacokinetic targets, such as steady-state exposure associated with favorable treatment outcome. These could be determined with pharmacokinetic-pharmacodynamic modeling or selected based on clinical experience
Individualization variable Covariate to be used for individualization, for example, body weight or creatinine clearance
Utility function An equation describing how deviations from the therapeutic targets should be penalized. It may include both efficacy and safety aspects
Practical constraints The number of break-points allowed in the individualization schedule, the unit of the individualization variable, and the maximal number of tablets in any dose group
3.1 Estimation of Break Points
A sequential estimation procedure with increasing steepness for the function (i.e., increasing value of γ) and a first-order, gradient-based estimation method proved successful for stable BP estimation. A generic code for a three-drug FDC using the steady-state area under the plasma concentration–time curve (AUC) as a target is provided in the ESM.
3.2 Conditions: Pediatric Anti-TB FDC
For the optimization of pediatric anti-TB FDCs, the following components were used.
Children weighting between 3 and 25 kg. A dataset including 43,400 virtual children with age uniformly distributed between 0 and 18 years was constructed. Male/female sex was assigned with a 50/50 probability. An adjusted growth reference per sex and randomly generated z-scores for weight were used to simulate body weight. Details on the adjusted growth reference used for simulations of the realistic pediatric TB cohort are provided in the ESM. After exclusion of children outside the defined weight range (3–25 kg), 26,275 children remained in the optimization population. The simulated age-weight distribution was compared with reference datasets of children with TB and found to agree well.
3.2.2 Therapeutic Targets
3.2.3 Population PK Models
The models for rifampicin, isoniazid, and pyrazinamide by Zvada et al. developed on a dataset including 76 South African children between 2.4 months and 11 years old were used . The models for all three drugs include allometric scaling with body weight. The models for rifampicin and isoniazid also include maturation functions for clearance over post-menstrual age, reaching close to full maturation around an age of 2 years. Additionally, the isoniazid model included three sub-populations representing fast, intermediate, and slow acetylators.
3.2.4 Individualization Variable
Body weight was selected as the individualization variable because it is the most important determinant of exposure in children according to the selected PK models. It is also a readily available metric, making the individualization feasible in resource-limited settings.
3.2.5 Utility Function
3.2.6 Practical Constraints
To enable comparison with the WHO-recommended FDC, identical constraints were used: four dose groups, only whole tablets administered and one tablet to the first dose group.
3.3 Findings: Pediatric Anti-TB FDC
Drug content per tablet and break-points for transition between the different number of tablets for the optimized FDC, the rounded optimized FDC, and the WHO-recommended FDC
Break-point 1–2 tablets (kg)
Break-point 2–3 tablets (kg)
Break-point 3–4 tablets (kg)
In this work, we have demonstrated a way to rationally design FDCs and choose an individualization schedule based on knowledge of exposure targets, pharmacokinetics, and the intended use population. In the current era with extensive information about PK properties for many compounds established and computational power being readily available, we and others [22, 23] argue that it should be the norm to strive for an evidence-based design rather than over-simplistically aiming for constant milligram/kilogram dosing.
Many extensions to the general framework presented here are possible. Instead of overall exposure, one can use any other PK metric as a target variable, e.g., maximal or minimal concentration, time above a certain threshold, in the case of antimicrobials, PK metrics adjusted for individual minimal inhibitory concentrations. The utility function can be expanded and/or adjusted to represent the exposure-response-safety profile of each drug. The penalty for deviating from a target can also be made dependable of individual characteristics, for example, one could imagine penalizing deviations in certain vulnerable populations harder. The utility function could be different for the different components of the FDC, or have the same definition but be weighted differentially according to the importance of each component.
The optimization approach taken here is utilitarian: it minimized the overall deviation from the target in the whole population. This may cause BPs to be selected such that the extreme dose groups, the first and the last, become small and thus get markedly worse exposures to improve the exposures for the large majority. In practice, this would generally not be acceptable from an ethical point of view. Furthermore, the relative increase in dose is biggest when going from one to two tablets, intrinsically leading to a larger spread of exposures around this BP. A simple remedy would be to allow the first dose group to start with two (or more) tables. Technically more demanding would be to incorporate in the utility function a measure of the relative bias between the different dose groups, which prevents the differences from becoming large. NONMEM was a convenient choice for the optimization procedure because population PK models used for the simulations of PK metrics often are implemented in this software. However, the code for the optimization procedure can readily be translated to e.g., Matlab or R.
The optimization of pediatric anti-TB FDCs, used as an example in this work, can be further refined. For example, instead of uniform ages, one could consider including epidemiological data on the age distribution of children with TB to generate a population following the observed pattern of higher prevalence in children under 5 years of age [43, 44]. However, given the utilitarian approach, doing this would intrinsically lead to a priority of the youngest children over the slightly older children, which in turn rises ethical questions regarding the fairness of prioritizing one population over another just because of their respective sizes. The population PK models used in the optimization procedure were all developed on data from South Africa , hence their appropriateness to adequately represent the global pediatric TB population is uncertain. For generalizable results, the optimization should preferably be performed with models developed on data from a range of high-burden countries, or alternatively using multiple models for each drug describing different populations to account for the global distribution of genetic polymorphisms in metabolizing enzymes. Therapeutic drug monitoring could be a useful strategy to confirm adequate drug exposure .
A specific limitation of the applied pyrazinamide model is the absence of the expected age-maturation function , leading to prediction of low exposures for the youngest age-group as demonstrated in Fig. 1. The sensitivity of the results to inclusion of such maturation function was evaluated by first estimating the typical shape of such a function using unpublished data from the Datic study (results not shown), and subsequently repeating the optimization procedure with the updated model. The estimates of optimal pyrazinamide dose and BPs differed only 3–6% from the estimate obtained in the original procedure. For isoniazid, the known global variability in the distribution of arylamine N-acetyltransferase 2 gene variations, which strongly impacts isoniazid clearance, is a complicating factor . In South Africa, and in the model used for the optimization, the proportion of fast acetylators is relatively high seen on the global scale [36, 46]. When optimizing assuming such a distribution, the isoniazid dose becomes relatively higher and the risk of underexposures is minimized. Given that much higher isoniazid doses (>15 mg/kg) routinely are used in treatment of multi-drug resistant TB, we do not expect this to lead to general safety issues [47, 48]. However, slow acetylators may have a relatively increased risk of adverse drug reactions such as liver injury . Exposure targets in adults are generally not well established for the first-line TB drugs, and the targets used in this work were derived from a single adult population. Given the large variability in reported exposures from different locations, and when using different drug formulation , this is a weakness.
Furthermore, using adult exposure targets for children may be debatable in the case of TB, as the disease manifestations may differ . The practical limitations for the optimization, such as the number of dose levels, as well as considerations regarding the shape of the utility function, the targets, and the relative importance of the included drugs should be further discussed by stakeholders before a final recommendation for the design of pediatric anti-TB FDCs can be given. In the interim, the results presented here indicate that the newly launched pediatric FDC endorsed by the WHO may contain too low doses, given our current best knowledge of the pharmacokinetics of the first-line anti-TB drugs in adults and children. We recommend that the PK observations from the ongoing SHINE study are carefully assessed and compared with exposure targets.
Previous work striving for a rational FDC design has often focused on a posteriori evaluation of suggested designs using Monte Carlo simulations [52, 53, 54]. In this project, we have developed and tested a methodology to enable a priori optimization of both tablet content and BPs for individualization. The method is readily implementable, applicable for diverse exposure–response relationships, and in contrast to Monte Carlo simulations, it does not require testing of a wide range of scenarios. With the availability of this tool, we hope to aid the medical community to move away from over-simplified dosing schedules following the outdated constant milligram/kilogram principle, and instead strive for rational designs integrating available knowledge on pharmacokinetics, population characteristics, and practical considerations to optimize exposures and thereby treatment outcomes.
The authors thank the Desmond Tutu TB Centre, Department of Paediatrics and Child Health, Stellenbosch University, South Africa, for sharing age-weight data used in the development of the simulation tool for a representative age-weight distribution in tuberculosis-infected children.
Compliance with Ethical Standards
Conflict of interest
Elin M. Svensson, Gunnar Yngman, Paolo Denti, Helen McIlleron, Maria C Kjellsson, and Mats O. Karlsson have no conflicts of interest directly relevant to the content of this article.
This work was supported by the Swedish Research Council (Grant No. 521-2011-3442), the Swedish Foundation for International Cooperation in Research and Higher Education, STINT, jointly with the South African National Research Council, National Research Foundation [NRF] (Grant No. STINT: SA2015-6259, NRF: 101575), and the Innovative Medicines Initiative Joint Undertaking (http://www.imi.europa.eu) for the PreDiCT-TB consortium (Grant Agreement 115337), resources of which are composed of a financial contribution from the European Union’s Seventh Framework Programme (FP7/2007-2013) and EFPIA companies’ in-kind contribution. Helen McIlleron was supported in part by the South African National Research Council (Grant No. 90729). The Datic study from which age-weight data were used was supported by the National Institutes of Health (Bethesda, MD, USA) and Eunice Kennedy Shriver National Institute of Child Health and Human Development (Bethesda, MD, USA) (Grant No. R01HD069175).
- 4.Blanco JL, Montaner JSG, Marconi VC, Santoro MM, Campos-Loza AE, Shafer RW, et al. Lower prevalence of drug resistance mutations at first-line virological failure to first-line therapy with atripla vs. tenofovir + emtricitabine/lamivudine + efavirenz administered on a multiple tablet therapy. AIDS. 2014;28:2531–9.CrossRefPubMedGoogle Scholar
- 12.Singh S, Mariappan TT, Shankar R, Sarda N, Singh B. A critical review of the probable reasons for the poor variable bioavailability of rifampicin from anti-tubercular fixed-dose combination (FDC) products, and the likely solutions to the problem. Int J Pharm. 2001;228:5–17.CrossRefPubMedGoogle Scholar
- 20.Fillekes Q, Natukunda E, Balungi J, Kendall L, Bwakura-Dangarembizi M, Keishanyu R, et al. Pediatric underdosing of efavirenz: a pharmacokinetic study in Uganda. J Acquir Immune Defic Syndr. 1999;2011(58):392–8.Google Scholar
- 25.World Health Organization. Global tuberculosis report 2016. WHO/HTM/TB/2016.13. Geneva: World Health Organization; 2016.Google Scholar
- 26.World Health Organization. Guidance for national tuberculosis programmes on the management of tuberculosis in children. WHO/HTM/TB/2006.371. Geneva: World Health Organization; 2014.Google Scholar
- 27.World Health Organization. The global plan to stop TB, 2011–2015. WHO/HTM/TB/2010.2. Geneva: World Health Organization; 2010.Google Scholar
- 28.World Health Organization. Rapid advice: treatment of tuberculosis in children. WHO/HTM/TB/2010.13. Geneva: World Health Organization; 2010.Google Scholar
- 29.World Health Organization. Dosing instructions for the use of currently available fixed-dose combination TB medicines for children. http://apps.who.int/medicinedocs/documents/s19927en/s19927en.pdf. 2009. Accessed 26 Jun 2017.
- 31.SHINE, Shorter treatment for children with minimal TB, protocol version 1.1. http://www.ctu.mrc.ac.uk/research/documents/tb_protocols/shine_protocol. Accessed 26 Jun 2016.
- 32.Beal S, Sheiner LB, Boeckmann A, Bauer RJ. NONMEM user’s guides (1989–2013). Ellicott City: Icon Development Solutions; 2013.Google Scholar
- 33.R Core Team. R: A language and environment for statistical computing. Vienna; 2014. http://www.R-project.org. Accessed 26 Jun 2017.
- 34.Yngman G. Individualization of fixed-dose combination regimens: methodology and application to pediatric tuberculosis. Master thesis report; Uppsala University, Uppsala, Sweden; 2015.Google Scholar
- 36.Zvada SP, Denti P, Donald PR, Schaaf HS, Thee S, Seddon JA, et al. Population pharmacokinetics of rifampicin, pyrazinamide and isoniazid in children with tuberculosis: in silico evaluation of currently recommended doses. J Antimicrob Chemother. 2014;69:1339–49.CrossRefPubMedPubMedCentralGoogle Scholar
- 37.Wilkins JJ, Savic RM, Karlsson MO, Langdon G, McIlleron H, Pillai G, et al. Population pharmacokinetics of rifampin in pulmonary tuberculosis patients, including a semimechanistic model to describe variable absorption. Antimicrob Agents Chemother. 2008;52:2138–48.CrossRefPubMedPubMedCentralGoogle Scholar
- 47.World Health Organization. Treatment guidelines for drugresistant tuberculosis, 2016 update. http://apps.who.int/iris/bitstream/10665/250125/1/9789241549639-eng.pdf?ua=1. Accessed 26 Jun 2017.
- 49.Azuma J, Ohno M, Kubota R, Yokota S, Nagai T, Tsuyuguchi K, et al. NAT2 genotype guided regimen reduces isoniazid-induced liver injury and early treatment failure in the 6-month four-drug standard treatment of tuberculosis: a randomized controlled trial for pharmacogenetics-based therapy. Eur J Clin Pharmacol. 2013;69:1091–101.CrossRefPubMedGoogle Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.