Synthesis, characterization and evaluations of TiO2 nanostructures prepared from different titania precursors for photocatalytic degradation of 4-chlorophenol in aqueous solution
- 5 Downloads
The aim of present work, was to synthesize the titanium nanoparticles (TNPs) and titanium nanotubes (TNTs) through the hydrothermal method with different precursors including the Titanium(IV) isopropoxide (TTIP) and Titanium(IV) bis(ammonium lactato)dihydroxide (TALH).
TiO2 nanostructures from different titania precursors as heterogeneous photocatalysis via hydrothermal method were synthesized. The as-prepared photocatalysts were characterized by X-ray diffraction, UV–Vis diffuse reflectance spectra, surface area measurements, Fourier transform infrared spectroscopy and field emission scanning electron microscopy. The TiO2 photocatalysts were tested on the degradation of 4-Chlorophenol (4-CP) aqueous solution under UVC irradiation in a fabricated photoreactor.
The effect of operating parameters including the; initial 4-CP concentration (50–150 mg/L), catalyst dosages (0–3 g/L) and solution pH (4–10) on the photocatalytic activity of the prepared catalysts were systematically investigated. The results show that amongst the TiO2 nanostructures under best conditions (initial 4-CP concentration of 50 mg/L, catalyst dosage of 2 g/L, pH of 4.0, Time of 180 min) TNT-P2 exhibited much higher photocatalytic degradation efficiency (82%) as compared with TNT-P1 (77%), TNP-P2 (51%), and TNP-P1 (48%). Moreover, the mechanism and tentative pathways of 4-CP degradation were explored. Finally, the kinetic study was performed and the Langmuir-Hinshelwood kinetic model was aptly fitted with the experimental data.
The results of the photocatalytic activity measurement demonstrated that one-dimensional TNTs shows enhanced photocatalytic performance as compared to the TNPs, therefore, indicating the beneficial feature of TNTs as a photocatalyst for the degradation of pollutants. Besides, TiO2 nanostructures prepared from TALH precursor (TNT-P2 82%, TNP-P2 51%) has higher photocatalytic degradation efficiency as compared with TTIP precursors (TNT-P1 77%, TNP-P1 48%).
KeywordsTitanium nanostructures Photocatalytic UV irradiation Hydrothermal method
This work was supported by the Petroleum University of Technology (PUT), Abadan Faculty of Petroleum University, Abadan, Iran. The authors thank the PUT for the financial support.
MF conceived the project. AP wrote the initial drafts of the work. AP designed the experiments, synthesized and characterized the materials. AP, MF, and BR analyzed the data. All authors discussed the results of the manuscript. All authors read and approved the final manuscript.
Compliance with ethical standards
The authors declare that they have no competing interests.
Consent for publication
Ethics approval and consent to participate
- 33.Pasandideh EK, Kakavandi B, Nasseri S, Mahvi AH, Nabizadeh R, Esrafili A, et al. Silica-coated magnetite nanoparticles core-shell spheres (Fe3O4@SiO2) for natural organic matter removal. J Environ Health Sci Eng. 2016;14:21.Google Scholar
- 46.Shojaie A, Fattahi M, Jorfi S, Ghasemi B. Hydrothermal synthesis of Fe-TiO2-ag nano-sphere for photocatalytic degradation of 4-chlorophenol (4-CP): investigating the effect of hydrothermal temperature and time as well as calcination temperature. J Environ Chem Eng. 2017;5:4564–72.Google Scholar
- 55.Poorkarimi A, Karimi-Jashni A, Javadpour S. Optimization of toluene removal over W-doped TiO2 nano-photocatalyst under visible light irradiation. Environ Technol. 2017;1–14. https://doi.org/10.1080/09593330.2017.1375021.
- 59.Payan A, Fattahi M, Jorfi S, Roozbehani B, Payan S. Synthesis and characterization of titanate nanotube/single-walled carbon nanotube (TNT/SWCNT) porous nanocomposite and its photocatalytic activity on 4-Chlorophenol degradation under UV and solar irradiation. Appl Surf Sci. 2018;434:336–50.CrossRefGoogle Scholar