Advertisement

Acta Metallurgica Sinica (English Letters)

, Volume 32, Issue 1, pp 23–30 | Cite as

A High-Ductility Mg–Zn–Ca Magnesium Alloy

  • Teng Tu
  • Xian-Hua ChenEmail author
  • Jiao Chen
  • Chao-Yue Zhao
  • Fu-Sheng Pan
Article
  • 64 Downloads

Abstract

A new kind of Mg–2Zn–0.6Ca (wt%) alloy was fabricated by casting and hot extrusion as a high-ductility structural material. The extruded alloy exhibits a superior elongation of ~ 30%, yield strength of 130 MPa and ultimate tensile strength of 280 MPa along the extrusion direction at room temperature. Microstructure, texture and tensile properties of the extruded alloy were investigated in details. The remarkable improvement of ductility is ascribed to the weakened basal texture, refined grains and a small number of second phase in the alloy.

Keywords

Magnesium alloy Mg–Zn–Ca High ductility Extrusion Texture 

Notes

Acknowledgements

This work was financially supported by the National Key R&D Program of China (No. 2016YFB0301100) and the National Natural Science Foundation of China (Nos. 51571043 and 51531002).

References

  1. [1]
    Y.B. Hu, C. Zhang, W.Q. Meng, F.S. Pan, J.P. Zhou, J. Alloys Compd. 727, 491 (2017)CrossRefGoogle Scholar
  2. [2]
    X.H. Chen, L.Z. Liu, J. Liu, F.S. Pan, Acta Metall. Sin. (Engl. Lett.) 28, 492 (2015)CrossRefGoogle Scholar
  3. [3]
    S.H. You, Y.D. Huang, K.U. Kainer, N. Hort, J. Magnes. Alloys 5, 239 (2017)CrossRefGoogle Scholar
  4. [4]
    M.X. Zhang, P.M. Kelly, Acta Mater. 53, 1085 (2005)CrossRefGoogle Scholar
  5. [5]
    W.Z. Chen, W.C. Zhang, Y.D. Qiao, Q. Miao, E.D. Wang, J. Alloys Compd. 665, 13 (2016)CrossRefGoogle Scholar
  6. [6]
    F.L. Guo, B. Feng, S.W. Fu, Y.C. Xin, S.W. Xu, Q. Liu, J. Magnes. Alloys 5, 13 (2017)CrossRefGoogle Scholar
  7. [7]
    X.J. Wang, D.K. Xu, R.Z. Wu, X.B. Chen, Q.M. Peng, L. Jin, Y.C. Xin, Z.Q. Zhang, Y. Liu, X.H. Chen, J. Mater. Sci. Technol. 34, 245 (2018)CrossRefGoogle Scholar
  8. [8]
    A.A. Luo, R.K. Mishra, A.K. Sachdev, Scr. Mater. 64, 410 (2011)CrossRefGoogle Scholar
  9. [9]
    C. Xu, M.Y. Zheng, S.W. Xu, K. Wu, E.D. Wang, S. Kamado, G.J. Wang, X.Y. Lv, Mater. Sci. Eng. A 547, 93 (2012)CrossRefGoogle Scholar
  10. [10]
    C. Xu, S.W. Xu, M.Y. Zheng, K. Wu, E.D. Wang, S. Kamado, G.J. Wang, X.Y. Lv, J. Alloys Compd. 524, 46 (2012)CrossRefGoogle Scholar
  11. [11]
    Y.B. Hu, J. Deng, C. Zhao, J.F. Wang, F.S. Pan, Nonferrous Met. Soc. China 21, 732 (2011)CrossRefGoogle Scholar
  12. [12]
    D. Wu, R.S. Chen, E.H. Han, J. Alloys Compd. 509, 2856 (2011)CrossRefGoogle Scholar
  13. [13]
    N. Kumar, D. Choudhuri, R. Banerjee, R.S. Mishra, Int. J. Plast 68, 77 (2015)CrossRefGoogle Scholar
  14. [14]
    S.Z. Wu, J.S. Zhang, Z.F. Zhang, C.X. Xu, K.B. Nie, X.F. Niu, Mater. Sci. Eng. A 648, 134 (2015)CrossRefGoogle Scholar
  15. [15]
    T. Hommaa, S. Hirawatari, H. Sunohara, S. Kamado, Mater. Sci. Eng. A 539, 163 (2012)CrossRefGoogle Scholar
  16. [16]
    T. Horie, H. Iwahori, Y. Seno, Y. Awano, Magnesium Technol. 2000, 261 (2000)Google Scholar
  17. [17]
    N. Stanford, Mater. Sci. Eng. A 528, 314 (2010)CrossRefGoogle Scholar
  18. [18]
    B.P. Zhang, L. Geng, L.J. Huang, X.X. Zhang, C.C. Dong, Scr. Mater. 63, 1024 (2010)CrossRefGoogle Scholar
  19. [19]
    L. Geng, B.P. Zhang, A.B. Li, C.C. Dong, Mater. Lett. 63, 557 (2009)CrossRefGoogle Scholar
  20. [20]
    Y. Chino, T. Ueda, Y. Otomatsu, K. Sassa, X.S. Huang, K. Suzuki, M. Mabuchi, Mater. Trans. 7, 1477 (2011)CrossRefGoogle Scholar
  21. [21]
    Y. Chino, K. Sassa, X. Huang, K. Suzuki, M. Mabuchi, J. Jpn. Inst. Met. 75, 35 (2011)CrossRefGoogle Scholar
  22. [22]
    Y. Chino, X. Huang, K. Suzuki, M. Mabuchi, Mater. Trans. 51, 818 (2010)CrossRefGoogle Scholar
  23. [23]
    H.L. Ding, X.B. Shi, Y.Q. Wang, G.P. Cheng, S. Kamado, Mater. Sci. Eng. A 645, 196 (2015)CrossRefGoogle Scholar
  24. [24]
    M. Hradilová, F. Montheillet, A. Fraczkiewicz, C. Desrayaud, P. Lejček, Mater. Sci. Eng. A 580, 217 (2013)CrossRefGoogle Scholar
  25. [25]
    Z.R. Zeng, M.Z. Bian, S.W. Xu, C.H.J. Davies, N. Birbilis, J.F. Nie, Mater. Sci. Eng. A 674, 459 (2016)CrossRefGoogle Scholar
  26. [26]
    E.L. Zhang, L. Yang, Mater. Sci. Eng. A 497, 111 (2008)CrossRefGoogle Scholar
  27. [27]
    Y.Z. Du, M.Y. Zheng, C. Xu, X.G. Qiao, K. Wu, X.D. Liu, G.J. Wang, X.Y. Lv, Mater. Sci. Eng. A 576, 6 (2013)CrossRefGoogle Scholar
  28. [28]
    Y.Z. Du, X.G. Qiao, M.Y. Zheng, D.B. Wang, K. Wu, I.S. Golovin, Mater. Des. 98, 285 (2016)CrossRefGoogle Scholar
  29. [29]
    Y.Z. Du, M.Y. Zheng, X.G. Qiao, K. Wu, X.D. Liu, G.J. Wang, X.Y. Lv, M.J. Li, X.L. Liu, Z.J. Wang, Y.T. Liu, Mater. Sci. Eng. A 583, 69 (2013)CrossRefGoogle Scholar
  30. [30]
    H.X. Li, Y.P. Ren, Q.Q. Ma, M. Jiang, G.W. Qin, Acta Metall. Sin. (Engl. Lett.) 48, 70 (2012)CrossRefGoogle Scholar
  31. [31]
    M. Mabuchi, Y. Chino, H. Lwasaki, T. Aizawa, K. Higashi, Mater. Trans. 42, 1182 (2001)CrossRefGoogle Scholar
  32. [32]
    T. Bhattacharjee, C.L. Mendis, K. Oh-ishi, T. Ohkubo, K. Hono, Mater. Sci. Eng. A 575, 231 (2013)CrossRefGoogle Scholar
  33. [33]
    Q. Li, G.J. Huang, X.D. Huang, S.W. Pan, C.L. Tan, Q. Liu, J. Magnes. Alloys 5, 166 (2017)CrossRefGoogle Scholar
  34. [34]
    G.G. Wang, G.S. Huang, X. Chen, Q.Y. Deng, A.T. Tang, B. Jiang, F.S. Pan, Mater. Sci. Eng. A 705, 46 (2017)CrossRefGoogle Scholar
  35. [35]
    L. Gao, H. Yan, J. Luo, A.A. Luo, R.S. Chen, J. Magnes, Alloys 1, 283 (2013)CrossRefGoogle Scholar
  36. [36]
    A.E. Giannakopoulos, S. Suresh, Scr. Mater. 46, 177 (1998)Google Scholar
  37. [37]
    L.B. Tong, M.Y. Zheng, S.W. Xu, S. Kamado, Y.Z. Du, X.S. Hu, K. Wu, W.M. Gan, H.G. Brokmeier, G.J. Wang, X.Y. Lv, Mater. Sci. Eng. A 528, 3741 (2011)CrossRefGoogle Scholar
  38. [38]
    Y.Z. Du, X.G. Qiao, M.Y. Zheng, K. Wu, S.W. Xu, Mater. Des. 85, 549 (2015)CrossRefGoogle Scholar
  39. [39]
    H. Zhang, G.S. Huang, L.F. Wang, J.H. Li, Scr. Mater. 67, 495 (2012)CrossRefGoogle Scholar
  40. [40]
    J. Luo, H. Yan, N. Zheng, R.S. Chen, Acta Metall. Sin. (Engl. Lett.) 29, 205 (2016)CrossRefGoogle Scholar
  41. [41]
    L.B. Tong, M.Y. Zheng, L.R. Cheng, D.P. Zhang, S. Kamado, J. Meng, H.J. Zhang, Mater. Charact. 104, 66 (2015)CrossRefGoogle Scholar
  42. [42]
    N. Stanford, M.R. Barnett, Int. J. Plast 47, 165 (2013)CrossRefGoogle Scholar
  43. [43]
    S.H. Park, B.S. You, R.K. Mishra, A.K. Sachdev, Mater. Sci. Eng. A 598, 396 (2014)CrossRefGoogle Scholar
  44. [44]
    B.C. Li, L.G. Hou, R.Z. Wu, J.H. Zhang, X.L. Li, M.L. Zhang, A.P. Dong, B.D. Sun, J. Alloys Compd. 722, 772 (2017)CrossRefGoogle Scholar

Copyright information

© The Chinese Society for Metals and Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  • Teng Tu
    • 1
  • Xian-Hua Chen
    • 1
    • 2
    Email author
  • Jiao Chen
    • 1
  • Chao-Yue Zhao
    • 1
  • Fu-Sheng Pan
    • 2
    • 3
  1. 1.College of Materials Science and EngineeringChongqing UniversityChongqingChina
  2. 2.National Engineering Research Center for Magnesium AlloysChongqing UniversityChongqingChina
  3. 3.Chongqing Academy of Science and TechnologyChongqingChina

Personalised recommendations