Advertisement

Evaluation of microstructural and mechanical properties of dissimilar Inconel 625 nickel alloy–UNS S32205 duplex stainless steel weldment using MIG welding

  • M. TumerEmail author
  • T. Karahan
  • T. Mert
Research Paper
  • 45 Downloads

Abstract

Inconel 625 nickel alloy and UNS S32205 duplex stainless steel (DSS) were welded with ER2209 filler metal using MIG (Metal Inert Gas) welding method. The weld metal obtained by DSS filler metal was subjected to mechanical and microstructural evaluation. Toughness and hardness properties had been examined by mechanical and microstructural characterization of weld metal, fusion line, and HAZ (Heat Affected Zone) region, and precipitations were investigated by light microscopy (LM), scanning electron microscopy (SEM), and energy-dispersive spectrometry (EDS). Corrosion behavior of base metals and face and root of weld metal were examined by using potentiodynamic polarization test. Additionally, detailed elemental analysis and mapping of weld metal with both optical emission spectrometer (OES) and X-Ray spectrometer were attained. Results demonstrate a significant decrease in toughness of the welding due to the presence of Nb and Mo rich intermetallic precipitations in the Inconel HAZ and root region, although there is no significant increase in hardness. Potentiodynamic polarization test shows that the dilution-induced microstructural transformation in the root of weld has the worst corrosion resistance in the weld metal. Therefore, this dissimilar welding does not have optimum properties for neither toughness nor corrosion.

Keywords

Nickel alloy Duplex stainless steel MIG Mechanical properties Microstructure Corrosion 

Notes

Acknowledgements

The authors would like to acknowledge the welding consumables support from Gedik Welding.

References

  1. 1.
    DuPont NJ, Lippold CJ, Kiser DS (2009) Welding metallurgy and weldability of nickel based alloys Wiley, HobokenGoogle Scholar
  2. 2.
    Kangazian J, Shamanian M, Ashrafi A (2017) Dissimilar welding between SAF 2507 stainless steel and Incoloy 825 Ni-based alloy: the role of microstructure on corrosion behavior of the weld metals. J Manuf Process 29:376–388.  https://doi.org/10.1016/j.jmapro.2017.08.012 CrossRefGoogle Scholar
  3. 3.
    Kangazian J, Shamanian M (2018) Characterization of structure–property relationship of Incoloy 825 and SAF 2507 dissimilar welds. Trans Indian Inst Metals 71:1747–1757.  https://doi.org/10.1007/s12666-018-1309-9 CrossRefGoogle Scholar
  4. 4.
    Sridhar R, Devendranath Ramkumar K, Arivazhagan N (2014) Characterization of microstructure, strength, and toughness of dissimilar weldments of inconel 625 and duplex stainless steel SAF 2205. Acta Metall Sin (English Lett) 27:1018–1030.  https://doi.org/10.1007/s40195-014-0116-5 CrossRefGoogle Scholar
  5. 5.
    Karahan T, Mert T, Tümer M, Kerimak ZM Microstructural analysis of Inconel 625 nickel alloy / UNS S31803 duplex stainless steel dissimilar weldments. pp 4–8Google Scholar
  6. 6.
    Ramkumar KD, Sridhar R, Periwal S et al (2015) Investigations on the structure – property relationships of electron beam welded Inconel 625 and UNS 32205. Mater Des 68:158–166.  https://doi.org/10.1016/j.matdes.2014.12.032 CrossRefGoogle Scholar
  7. 7.
    Ramkumar KD, Oza S, Periwal S et al (2015) Characterization of weld strength and toughness in the multi-pass welding of Inconel 625 and Super-duplex stainless steel UNS S32750. Cienc Tecnol dos Mater 27:41–52.  https://doi.org/10.1016/j.ctmat.2015.04.004 CrossRefGoogle Scholar
  8. 8.
    Mohammed GR, Ishak M, Aqida SN, Abdulhadi HA (2017) Effects of heat input on microstructure , corrosion and mechanical characteristics of welded austenitic and duplex stainless steels : a review  https://doi.org/10.3390/met7020039 CrossRefGoogle Scholar
  9. 9.
    Wang S, Ma Q, Li Y (2011) Characterization of microstructure , mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnR. Mater Des 32:831–837.  https://doi.org/10.1016/j.matdes.2010.07.012 CrossRefGoogle Scholar
  10. 10.
    Gunn R (1997) Duplex stainless steels: microstructure, properties and applications. Abingt Publ 219Google Scholar
  11. 11.
    Yıldızlı K (2015) Investigation on the microstructure and toughness properties of austenitic and duplex stainless steels weldments under cryogenic conditions. Mater Des 77:83–94.  https://doi.org/10.1016/j.matdes.2015.04.008 CrossRefGoogle Scholar
  12. 12.
    Yılmaz R, Tümer M (2013) Microstructural studies and impact toughness of dissimilar weldments between AISI 316 L and AH36 steels by FCAW. Int J Adv Manuf Technol 67:1433–1447.  https://doi.org/10.1007/s00170-012-4579-0 CrossRefGoogle Scholar
  13. 13.
    Huang B-S, Yang J, Lu D-H, Bin W-J (2016) Study on the microstructure, mechanical properties and corrosion behaviour of S355JR/316L dissimilar welded joint prepared by gas tungsten arc welding multi-pass welding process. Sci Technol Weld Join 21:381–388.  https://doi.org/10.1080/13621718.2015.1122152 CrossRefGoogle Scholar
  14. 14.
    Kumar KG, Ramkumar KD, Arivazhagan N (2015) Characterization of metallurgical and mechanical properties on the multi-pass welding of Inconel 625 and AISI 316L. J Mech Sci Technol 29:1039–1047.  https://doi.org/10.1007/s12206-014-1112-4 CrossRefGoogle Scholar
  15. 15.
    Ramkumar KD, Kumar PSG, Krishna VR et al (2016) Influence of laser peening on the tensile strength and impact toughness of dissimilar welds of Inconel 625 and UNS S32205. Mater Sci Eng A 676:88–99.  https://doi.org/10.1016/j.msea.2016.08.104 CrossRefGoogle Scholar
  16. 16.
    Mortezaie A, Shamanian M (2014) An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel. Int J Press Vessel Pip 116:37–46.  https://doi.org/10.1016/j.ijpvp.2014.01.002 CrossRefGoogle Scholar
  17. 17.
    Sayiram G, Arivazhagan N (2015) Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel. Mater Charact 102:180–188.  https://doi.org/10.1016/j.matchar.2015.03.006 CrossRefGoogle Scholar
  18. 18.
    Sireesha M, Shankar V, Albert SK, Sundaresan S (2000) Microstructural features of dissimilar welds between 316LN austenitic stainless steel and alloy 800. Mater Sci Eng A 292:74–82.  https://doi.org/10.1016/S0921-5093(00)00969-2 CrossRefGoogle Scholar
  19. 19.
    Devendranath Ramkumar K, Patel SD, Sri Praveen S et al (2014) Influence of filler metals and welding techniques on the structure-property relationships of Inconel 718 and AISI 316L dissimilar weldments. Mater Des 62:175–188.  https://doi.org/10.1016/j.matdes.2014.05.019 CrossRefGoogle Scholar
  20. 20.
    Kangazian J, Shamanian M (2017) Mechanical and microstructural evaluation of SAF 2507 and incoloy 825 dissimilar welds. J Manuf Process 26:407–418.  https://doi.org/10.1016/j.jmapro.2017.03.006 CrossRefGoogle Scholar
  21. 21.
    Shankar V, Gill TPS, Mannan SL, Sundaresan S (2003) Solidification cracking in austenitic stainless steel welds. Sadhana 28:359–382.  https://doi.org/10.1007/BF02706438 CrossRefGoogle Scholar
  22. 22.
    Lippold JC, Kotecki DJ (2005) Welding metallurgy and weldability of stainless steelsGoogle Scholar
  23. 23.
    Ranjbar K, Dehmolaei R, Amra M, Keivanrad I (2018) Microstructure and properties of a dissimilar weld between alloy 617 and A387 steel using different filler metals. Weld World 62:1121–1136.  https://doi.org/10.1007/s40194-018-0610-x CrossRefGoogle Scholar
  24. 24.
    Li G, Huang J, Wu Y (2014) An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser. Int J Adv Manuf Technol 76:1203–1214.  https://doi.org/10.1007/s00170-014-6349-7 CrossRefGoogle Scholar
  25. 25.
    Xu F, Lv Y, Liu Y et al (2013) Microstructural evolution and mechanical properties of Inconel 625 alloy during pulsed plasma arc deposition process. J Mater Sci Technol 29:480–488.  https://doi.org/10.1016/j.jmst.2013.02.010 CrossRefGoogle Scholar
  26. 26.
    Xu FJ, Lv YH, Xu BS et al (2013) Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition. Mater Des 45:446–455.  https://doi.org/10.1016/j.matdes.2012.07.013 CrossRefGoogle Scholar
  27. 27.
    Devendranath Ramkumar K, Jagat Sai R, Santhosh Reddy V et al (2015) Effect of filler wires and direct ageing on the microstructure and mechanical properties in the multi-pass welding of Inconel 718. J Manuf Process 18:23–45.  https://doi.org/10.1016/j.jmapro.2015.01.001 CrossRefGoogle Scholar
  28. 28.
    Ramkumar KD, Kumar BM, Krishnan MG et al (2015) Studies on the weldability, microstructure and mechanical properties of activated flux TIG weldments of Inconel 718. Mater Sci Eng A 639:234–244.  https://doi.org/10.1016/j.msea.2015.05.004 CrossRefGoogle Scholar
  29. 29.
    Liao MT, Chen WJ (1998) The influence of shielding gas on notch toughness of stainless steel weld metals. Mater Manuf Process 13:565–573.  https://doi.org/10.1080/10426919808935276 CrossRefGoogle Scholar
  30. 30.
    Tümer M, Yılmaz R (2016) Characterization of microstructure, chemical composition, and toughness of a multipass welded joint of austenitic stainless steel AISI316L. Int J Adv Manuf Technol:1–13.  https://doi.org/10.1007/s00170-016-8614-4 CrossRefGoogle Scholar
  31. 31.
    Liao MT, Chen WJ (1998) The effect of shielding-gas compositions on the microstructure and mechanical properties of stainless steel weldments. Mater Chem Phys 55:145–151.  https://doi.org/10.1016/S0254-0584(98)00134-5 CrossRefGoogle Scholar
  32. 32.
    Mukhopadhyay S, Pal TK (2006) Effect of shielding gas mixture on gas metal arc welding of HSLA steel using solid and flux-cored wires. Int J Adv Manuf Technol 29:262–268.  https://doi.org/10.1007/s00170-005-2510-7 CrossRefGoogle Scholar
  33. 33.
    Evangeline A, Sathiya P (2019) Cold metal arc transfer (CMT) metal deposition of Inconel 625 superalloy on 316L austenitic stainless steel: microstructural evaluation, corrosion and wear resistance properties. Mater Res Express 6:1–2.  https://doi.org/10.1016/j.vetmic.2007.04.014 CrossRefGoogle Scholar

Copyright information

© International Institute of Welding 2019

Authors and Affiliations

  1. 1.Kocaeli UniversityKartepeTurkey
  2. 2.İstanbul Gedik UniversityKartalTurkey
  3. 3.Yıldız Technical UniversityBeşiktaşTurkey

Personalised recommendations