Advertisement

Welding in the World

, Volume 62, Issue 5, pp 985–995 | Cite as

On the design of fillet welds made of ultra-high-strength steel

  • Timo Björk
  • Antti Ahola
  • Niko Tuominen
Research Paper
  • 120 Downloads

Abstract

Current static design approaches for fillet arc welds made of high- or ultra-high-strength steel (UHSS) do not differ from the design of welds made of conventional steels. However, important issues such as potential softening in heat-affected zone (HAZ), strength at fusion lines, optimal reinforcement geometry, load capacity changes due to local bending moment, and the effect of post-weld treatments on the joint strength require careful consideration in order to ensure optimum performance from these steels. This paper reprises results of previous research works and recent findings and summarizes key aspects of weld design specific to UHSS welds.

Keywords

Static strength Welded joint Fillet welds Throat thickness Ultra-high-strength steels 

Notes

Acknowledgements

The authors wish to thank SSAB, DIMECC Ltd., and the Finnish Funding Agency for Innovation (TEKES) for funding the BSA (Breakthrough Steels and Applications) program that enabled this research work to be completed. Additionally, the authors express their gratitude to the IT Center for Science (CSC) for providing the licensing of software.

References

  1. 1.
    EN 10149-2 (2013) Hot rolled flat products made of high yield strength steels for cold forming—part 2: technical delivery conditions for thermomechanically rolled steelsGoogle Scholar
  2. 2.
    EN 1993-1-8 (2005) Eurocode 3—design of steel structures—part 1-8: design of jointsGoogle Scholar
  3. 3.
    EN 1993-1-12 (2007) Eurocode 3—design of steel structures - Part 1-12: additional rules for the extension of EN 1993 up to steel grades S700Google Scholar
  4. 4.
    Björk T, Toivonen J, Nykänen T (2012) Capacity of fillet welded joints made of ultra high-strength steel. Weld World 56:71–84.  https://doi.org/10.1007/BF03321337 CrossRefGoogle Scholar
  5. 5.
    Björk T (2005) Ductility and ultimate strength of cold-formed rectangular hollow section joints at subzero temperatures. Doctoral dissertation. Lappeenranta University of TechnologyGoogle Scholar
  6. 6.
    EN 1011-1 (2009) Welding—recommendations for welding of metallic materials—part 1: general guidance for arc weldingGoogle Scholar
  7. 7.
    EN 1011-2 (2001) Welding—recommendations for welding of metallic materials. Part 2: arc welding of ferritic steelsGoogle Scholar
  8. 8.
    Karppi R, Leiviskä P, Laitinen R (2008) Developments in MAG-welding for ultra high strength steel; Optim 960 QC. In: Int. Symbosium From Weld. Fract. to Pipeline Technol. pp 1–20Google Scholar
  9. 9.
    Amraei M, Skriko T, Björk T, Zhao XL (2016) Plastic strain characteristics of butt-welded ultra-high strength steel (UHSS). Thin-Walled Struct 109:227–241.  https://doi.org/10.1016/j.tws.2016.09.024 CrossRefGoogle Scholar
  10. 10.
    Amraei M, Dabiri M, Björk T, Skriko T (2016) Effects of workshop fabrication processes on the deformation capacity of S960 ultra-high strength steel. J Manuf Sci Eng 138:121007CrossRefGoogle Scholar
  11. 11.
    Guo W, Crowther D, Francis JA, Thompson A, Liu Z, Li L (2015) Microstructure and mechanical properties of laser welded S960 high strength steel. Mater Des 85:534–548.  https://doi.org/10.1016/j.matdes.2015.07.037 CrossRefGoogle Scholar
  12. 12.
    Siltanen J, Tihinen S, Kömi J (2015) Laser and laser gas-metal-arc hybrid welding of 960 MPa direct-quenched structural steel in a butt joint configuration. J Laser Appl 27:S29007.  https://doi.org/10.2351/1.4906386 CrossRefGoogle Scholar
  13. 13.
    Peltoniemi T (2016) The effect of stress concentration on the ultimate capacity of welded joints made of ultra-high strength steel. Master’s thesis. Lappeenranta University of TechnologyGoogle Scholar
  14. 14.
    Porter D (2015) Weldable high-strength steels: challenges and engineering applications. 68th IIW Annu. Assem. Int. Conf. High Strength Mater. - Challenges ApplGoogle Scholar
  15. 15.
    Björk T, Nykänen T, Valkonen I (2017) On the critical plane of axially loaded plate structures made of ultra-high strength steel. Weld World 61:139–150.  https://doi.org/10.1007/s40194-016-0387-8 CrossRefGoogle Scholar
  16. 16.
    Penttilä T (2012) Static strength design of fillet welds with conventional methods and new improved design methods based on different boundary conditions (in Finnish). In: Proc. 11th Finnish mech. days. pp 169–176Google Scholar
  17. 17.
    Penttilä T (2013) Effects of different GMAW processes and parameters on behavior of transverse fillet welds made of ultra-high strength steels. Master’s thesis. Lappeenranta University of TechnologyGoogle Scholar
  18. 18.
    Tousignant K, Packer J (2016) Fillet welding to hollow structural sections. IIW-document XV-1524-16Google Scholar
  19. 19.
    EN ISO 5817 (2014) Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections 38Google Scholar
  20. 20.
    Björk T, Penttilä T, Nykänen T (2014) Rotation capacity of fillet weld joints made of high-strength steel. Weld World 58:853–863.  https://doi.org/10.1007/s40194-014-0164-5 CrossRefGoogle Scholar
  21. 21.
    Pavlina EJ, Van Tyne CJ (2008) Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform 17:888–893.  https://doi.org/10.1007/s11665-008-9225-5 CrossRefGoogle Scholar
  22. 22.
    Anthes RJ, Köttgen VB, Seeger T (1993) Stress concentration factors for butt joints and double T-joints (in German). Schweißen und Scheiden 45:685–688Google Scholar
  23. 23.
    Maddox SJ (1991) Fatigue strength of welded structures. Abington PublishingGoogle Scholar
  24. 24.
    Rasche C, Kuhlmann U (2010) The load bearing capacity of fillet welded connections of high strength steels. In: IABSE symp pp 71–78Google Scholar
  25. 25.
    Rasche C, Kuhlmann U (2012) Load bearing capacity of fillet welded connections of high strength steel (in German). Stahlbau 81:889–897.  https://doi.org/10.1002/stab.201201628 CrossRefGoogle Scholar
  26. 26.
    Tuominen N, Björk T, Ahola A (2017) Effect of bending moment on capacity of fillet weld. 16th Int. Symp. Tubul. Struct. ISTS16Google Scholar
  27. 27.
    Tuominen N, Björk T, Litmanen J (2016) Effect of secondary moment on the strength of weld (in Finnish). J Struct Mech 49:237–251Google Scholar
  28. 28.
    Haajanen M (2017) Effect of post-weld treatment on the static strength of ultra-high strength steel (in Finnish). Bachelor’s thesis. Lappeenranta University of TechnologyGoogle Scholar
  29. 29.
    Skriko T (2018) Dependence of manufacturing parameters on the performance quality of welded joints made of direct quenched ultra-high-strength steel. Doctoral dissertation. Lappeenranta University of Technology. Under work, submitted for preliminary examinationGoogle Scholar

Copyright information

© International Institute of Welding 2018

Authors and Affiliations

  1. 1.Laboratory of Steel StructuresLappeenranta University of Technology (LUT)LappeenrantaFinland

Personalised recommendations