Welding in the World

, Volume 60, Issue 2, pp 169–175 | Cite as

TiN/Al2O3-reinforced composite coating prepared by reactive nitrogen-arc cladding process

  • Jianjun Hao
  • Jianchang Li
  • Shuhua Yang
  • Jianguo Zhao
  • Yuejin Ma
Research Paper
First Online:
Received:
Accepted:
  • 147 Downloads

Abstract

A TiN/Al2O3-reinforced composite coating was fabricated on 45# steel substrate by reactive nitrogen-arc cladding process with Ti-Al2O3-Fe-Ni60A powder blends as cladding materials and pure nitrogen as reactive and protective gas. The microstructure, microhardness, and wear behavior of the composite coating were investigated using scanning electron microscope (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), microhardness tester, and the friction abrasion testing machine. The formation mechanism of the phases in the composite coating was discussed. Results show that the composite coating consists of primary TiN/Al2O3 as the reinforcing phase. The ceramic composite coating is metallurgically bonded to the 45# steel substrate. The ceramic composite coating has high hardness and excellent wear resistance.

Keywords (IIW Thesaurus)

GTA surfacing Particle reinforced composites Nitrogen Chemical reactions Alumina Nitrides Wear resistance Nickel alloys 
This is a preview of subscription content, log in to check access.

Notes

Acknowledgments

This work was financially supported by the Natural Science Foundation of Hebei Province for Distinguished Young Scientists (No. E2011204036), the Natural Science Foundation of Hebei Province (No. E2007000566), the Technology Foundation of Hebei Agricultural University (No. LG20120103), the Natural Science Foundation of Hebei Province (No. E2014204028) and the Youth Fund of Hebei Education Department (No. QN2014100).

References

  1. 1.
    Wang L, Yan D, Yang Y, Dong Y, Chen X, Zhang J (2014) Ceram Int 40:6481–6486CrossRefGoogle Scholar
  2. 2.
    Mueller WM, Moosburger-Will J, Sause MGR, Greisel M, Horn S (2015) J Eur Ceram Soc 35:2981–2989CrossRefGoogle Scholar
  3. 3.
    Kung K-C, Yuan K, Lee T-M, Lui T-S (2012) J Alloys Compd 515:68–73CrossRefGoogle Scholar
  4. 4.
    Frangini S, Masci A (2010) Surf Coat Technol 204:2613–2623CrossRefGoogle Scholar
  5. 5.
    Lin X, Zhao G, Wu L, Duan G, Han G (2010) J Alloys Compd 502:195–198CrossRefGoogle Scholar
  6. 6.
    Park Y-J, Shin K-H, Song H-J (2007) Appl Surf Sci 253:6013–6018CrossRefGoogle Scholar
  7. 7.
    Mohmad Soib S, Baker TN, Watson LM (2001) J Mater Process Technol 113:509–515CrossRefGoogle Scholar
  8. 8.
    Lin Z, JiNing H, DianRan Y, LiSong X, YanChun D, DingChuan X, DeLiang M (2007) Chin Sci Bull 52:1849–1855CrossRefGoogle Scholar
  9. 9.
    Yang Y, Zhang D, Yan W, Zheng Y (2010) Opt Lasers Eng 48:119–124CrossRefGoogle Scholar
  10. 10.
    Costa MYP, Venditti MLR, Cioffi MOH, Voorwald HJC, Guimarães VA, Ruas R (2011) Int J Fatigue 33:759–765CrossRefGoogle Scholar
  11. 11.
    Nandwana P, Hwang JY, Koo MY, Tiley J, Hong SH, Banerjee R (2012) Mater Lett 83:202–205CrossRefGoogle Scholar
  12. 12.
    Chang-bin T, Dao-xin L, Wang Z, Gao Y (2011) Appl Surf Sci 257:6364–6371CrossRefGoogle Scholar
  13. 13.
    Hao JJ, Ma LP, Gao L, Ma YJ, Zhao JG (2012) Applied Mechanics and Materials 190–191:581–584CrossRefGoogle Scholar
  14. 14.
    Kobayashi A (2000) Surf Coat Technol 132:152–157CrossRefGoogle Scholar
  15. 15.
    Liu W-S, Hua H-C, Nen-Wen P, Liang S-C (2015) J Alloys Compd 631:146–152CrossRefGoogle Scholar
  16. 16.
    Li J, Gao L, Guo J (2003) J Eur Ceram Soc 23:69–74CrossRefGoogle Scholar
  17. 17.
    Fei YH, Huang CZ, Liu HL, Zou B (2014) Ceram Int 40:10205–10209CrossRefGoogle Scholar
  18. 18.
    Huang S, Sun D, Wang W (2015) Int J Refract Met Hard Mater 52:36–43CrossRefGoogle Scholar
  19. 19.
    Manoj K, Harpreet S, Narinder S, Ravinder Singh J (2015) Wear 332–333:1035–1043Google Scholar
  20. 20.
    Lei Y, Sun R, Tang Y, Niu W (2015) Opt Lasers Eng 66:181–186CrossRefGoogle Scholar

Copyright information

© International Institute of Welding 2016

Authors and Affiliations

  • Jianjun Hao
    • 1
  • Jianchang Li
    • 1
  • Shuhua Yang
    • 1
  • Jianguo Zhao
    • 1
  • Yuejin Ma
    • 1
  1. 1.College of Mechanical and Electrical EngineeringAgriculture University of HebeiBaodingPeople’s Republic of China

Personalised recommendations