Advertisement

Journal of Advanced Ceramics

, Volume 8, Issue 1, pp 19–38 | Cite as

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

  • Guiwu LiuEmail author
  • Xiangzhao Zhang
  • Jian Yang
  • Gunjun Qiao
Open Access
Review
  • 47 Downloads

Abstract

Silicon carbide (SiC) has been widely concerned for its excellent overall mechanical and physical properties, such as low density, good thermal-shock behavior, high temperature oxidation resistance, and radiation resistance; as a result, the SiC-based materials have been or are being widely used in most advanced fields involving aerospace, aviation, military, and nuclear power. Joining of SiC-based materials (monolithic SiC and SiCf/SiC composites) can resolve the problems on poor processing performance and difficulty of fabrication of large-sized and complex-shaped components to a certain extent, which are originated from their high inherent brittleness and low impact toughness. Starting from the introduction to SiC-based materials, joining of ceramics, and joint strength characterization, the joining of SiC-based materials is reviewed by classifying the as-received interlayer materials, involving no interlayer, metallic, glass-ceramic, and organic interlayers. In particular, joining processes (involving joining techniques and parameter conditions), joint strength, interfacial microstructures, and/or reaction products are highlighted for understanding interfacial behavior and for supporting development of application-oriented joining techniques.

Keywords

SiC ceramics SiCf/SiC composites joining joint strength interfacial behavior 

Notes

Acknowledgements

This work was supported by the National Natural Science Foundation of China (No. 51572112), the National Key R&D Program of China (No. 2017YFB0310400), the 333 Talents Project (No. BRA2017387), Six Talent Peaks Project (No. TD-XCL-004), Innovation/Entrepreneurship Program ([2015]26), and Qing Lan Project ([2016]15) of Jiangsu Province.

References

  1. [1]
    Zhou XG, Wang HL, Zhao S. Progress of SiCf/SiC composites for nuclear application. Adv Ceram 2016, 37: 151–167.Google Scholar
  2. [2]
    Chen MW, Xie WJ, Qiu HP. Recent progress in continuous SiC fiber SiC ceramic matrix composites. Adv Ceram 2016, 37: 393–402.Google Scholar
  3. [3]
    Liu GW, Qiao GJ, Wang HJ, et al. Pressureless brazing of zirconia to stainless steel with Ag–Cu filler metal and TiH2 powder. J Eur Ceram Soc 2008, 28: 2701–2708.CrossRefGoogle Scholar
  4. [4]
    Liu GW, Qiao GJ, Wang HJ, et al. Bonding mechanisms and shear properties of alumina ceramic/stainless steel brazed joint. J Mater Eng Perform 2011, 20: 1563–1568.CrossRefGoogle Scholar
  5. [5]
    Liu HJ, Feng JC, Qian YY. Interface structure and formation mechanism of diffusion-bonded joints of SiC ceramic to TiAl-based alloy. Scripta Mater 2000, 43: 49–53.CrossRefGoogle Scholar
  6. [6]
    Zhang C, Qiao G, Jin Z. Active brazing of pure alumina to Kovar alloy based on the partial transient liquid phase (PTLP) technique with Ni–Ti interlayer. J Eur Ceram Soc 2002, 22: 2181–2186.CrossRefGoogle Scholar
  7. [7]
    Li S, Duan H, Liu S, et al. Interdiffusion involved in SHS welding of SiC ceramic to itself and to Ni-based superalloy. Int J Refract Met H 2000, 18: 33–37.CrossRefGoogle Scholar
  8. [8]
    Uday MB, Ahmad Fauzi MN, Zuhailawati H, et al. Effect of welding speed on mechanical strength of friction welded joint of YSZ-alumina composite and 6061 aluminum alloy. Mat Sci Eng A 2011, 528: 4753–4760.CrossRefGoogle Scholar
  9. [9]
    Döhler F, Zscheckel T, Kasch S, et al. A glass in the CaO/MgO/Al2O3/SiO2 system for the rapid laser sealing of alumina. Ceram Int 2017, 43: 4302–4308CrossRefGoogle Scholar
  10. [10]
    Singh M. A reaction forming method for joining of silicon carbide-based ceramics. Scripta Mater 1997, 37: 1151–1154.CrossRefGoogle Scholar
  11. [11]
    Krenkel W, Henke T, Mason N. In-situ joined CMC components. Key Eng Mater 1996, 127: 313–320.CrossRefGoogle Scholar
  12. [12]
    Katoh Y, Snead LL, Cheng T, et al. Radiation-tolerant joining technologies for silicon carbide ceramics and composites. J Nucl Mater 2014, 448: 497–511.CrossRefGoogle Scholar
  13. [13]
    Ferraris M, Salvo M, Casalegno V, et al. Torsion tests on AV119 epoxy-joined SiC. Int J Appl Ceram Technol 2012, 9: 795–807.CrossRefGoogle Scholar
  14. [14]
    Ferraris M, Ventrella A, Salvo M, et al. Shear strength measurement of AV119 epoxy-joined SiC by different torsion tests. Int J Appl Ceram Technol 2014, 11: 394–401.CrossRefGoogle Scholar
  15. [15]
    Zhang X, Liu G, Tao J, et al. Brazing of WC–8Co cemented carbide to steel using Cu–Ni–Al alloys as filler metal: Microstructures and joint mechanical behavior. J Mater Sci Technol 2018, 34: 1180–1188.CrossRefGoogle Scholar
  16. [16]
    Zhang X, Huang Z, Liu G, et al. Wetting and brazing of Ni-coated WC-8Co cemented carbide using the Cu–19Ni–5Al alloy as filler metal: Microstructural evolution and joint mechanical properties. J Mater Res 2018, 33: 1671–1680.CrossRefGoogle Scholar
  17. [17]
    Salvo M, Rizzo S, Casalegno V, et al. Shear and bending strength of SiC/SiC joined by a modified commercial adhesive. Int J Appl Ceram Technol 2012, 9: 778–785.CrossRefGoogle Scholar
  18. [18]
    Ferraris M, Salvo M, Casalegno V, et al. Joining of machined SiC/SiC composites for thermonuclear fusion reactors. J Nucl Mater 2008, 375: 410–415.CrossRefGoogle Scholar
  19. [19]
    Li S J, Liu WH, Lu YH, et al. Joining of pressureless sintered SiC using polysiloxane SR355 with active additive Ni nanopowder. Acta Mater Compos Sin 2008, 25: 72–76.Google Scholar
  20. [20]
    Dong H, Li S, Teng Y, et al. Joining of SiC ceramic-based materials with ternary carbide Ti3SiC2. Mat Sci Eng B 2011, 176: 60–64.CrossRefGoogle Scholar
  21. [21]
    Li SJ, Zhou Y, Duan HP, et al. Joining of SiC ceramic to Ni-based superalloy with functionally gradient material fillers and a tungsten intermediate layer. J Mater Sci 2003, 38: 4065–4070.CrossRefGoogle Scholar
  22. [22]
    Dong HY, Li SJ, He YH. Joining of reaction bonded SiC ceramic using Ti3SiC2 powder as filler. Chin J Nonfer Metal 2005, 15: 1051–1056.Google Scholar
  23. [23]
    Aroshas R, Rosenthal I, Stern A, et al. Silicon carbide diffusion bonding by spark plasma sintering. Mater Manuf Process 2015, 30: 122–126.CrossRefGoogle Scholar
  24. [24]
    Grasso S, Tatarko P, Rizzo S, et al. Joining of β-SiC by spark plasma sintering. J Eur Ceram Soc 2014, 34: 1681–1686.CrossRefGoogle Scholar
  25. [25]
    Okuni T, Miyamoto Y, Abe H, et al. Joining of silicon carbide and graphite by spark plasma sintering. Ceram Int 2014, 40: 1359–1363.CrossRefGoogle Scholar
  26. [26]
    Kishimoto H, Shibayama T, Abe T, et al. Diffusion bonding technology of tungsten and SiC/SiC composites for nuclear applications. IOP Conf Ser: Mater Sci 2011, 18: 162015CrossRefGoogle Scholar
  27. [27]
    Kishimoto H, Shibayama T, Shimoda K. Microstructural and mechanical characterization of W/SiC bonding for structural material in fusion. J Nucl Mater 2011, 417: 387–390.CrossRefGoogle Scholar
  28. [28]
    Matsuo G, Shibayama T, Kishimoto H, et al. Micro-chemical analysis of diffusion bonded W–SiC joint. J Nucl Mater 2011, 417: 391–394.CrossRefGoogle Scholar
  29. [29]
    Zhong Z, Hinoki T, Kohyama A. Microstructure and mechanical strength of diffusion bonded joints between silicon carbide and F82H steel. J Nucl Mater 2011, 417: 395–399.CrossRefGoogle Scholar
  30. [30]
    Pan H, Itoh I, Matsubara M. Mechanical properties of diffusion bonding joint of SiC and Al–Sn alloys at elevated temperatures. Mater Trans 2001, 42: 2543–2547.CrossRefGoogle Scholar
  31. [31]
    Sozhamannan GG, Prabu SB. Influence of interface compounds on interface bonding characteristics of aluminium and silicon carbide. Mater Charact 2009, 60: 986–990.CrossRefGoogle Scholar
  32. [32]
    Sozhamannan GG, Balasivanandha Prabu S. Evaluation of interface bonding strength of aluminum/silicon carbide. Int J Adv Manuf Technol 2009, 44: 385–388.CrossRefGoogle Scholar
  33. [33]
    Valenza F, Gambaro S, Muolo ML, et al. Wetting of SiC by Al–Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C2. J Eur Ceram Soc 2018, 38: 3727–3734.CrossRefGoogle Scholar
  34. [34]
    Zhang Z, Huang J, Zhang H, et al. Microstructures of Si/SiC ceramic and invar alloy brazing joint. Rare Metal Mater Eng 2009, 38: 493–496.CrossRefGoogle Scholar
  35. [35]
    Zhao HT, Huang JH, Zhang H, et al. Vacuum brazing of Si/SiC ceramic and low expansion titanium alloy by using Cu–Ti fillers. Rare Metal Mater Eng 2007, 36: 2184–2188.Google Scholar
  36. [36]
    Riccardi B, Nannetti CA, Woltersdorf J, et al. Brazing of SiC and SiCf/SiC composites performed with 84Si–16Ti eutectic alloy: Microstructure and strength. J Mater Sci 2002, 37: 5029–5039.CrossRefGoogle Scholar
  37. [37]
    Riccardi B, Nannetti CA, Woltersdorf J, et al. Joining of SiC based ceramics and composites with Si–16Ti and Si–18Cr eutectic alloys. Int J Mater Prod Technol 2004, 20: 440–451.CrossRefGoogle Scholar
  38. [38]
    Li JK, Liu L, Liu X. Joining of SiC ceramic by 22Ti–78Si high-temperature eutectic brazing alloy. J Inorg Mater 2011, 26: 1314–1318.CrossRefGoogle Scholar
  39. [39]
    Nagatsuka K, Sechi Y, Nakata K. Dissimilar joint characteristics of SiC and WC–Co alloy by laser brazing. J Phys: Conf Ser 2012, 379: 012047.Google Scholar
  40. [40]
    Liu HJ, Feng JC, Qian YY. Microstructure and strength of the SiC/TiAl joint brazed with Ag–Cu–Ti filler metal. J Mater Sci Lett 2000, 19: 1241–1242.CrossRefGoogle Scholar
  41. [41]
    Liu Y, Huang ZR, Liu XJ. Joining of sintered silicon carbide using ternary Ag–Cu–Ti active brazing alloy. Ceram Int 2009, 35: 3479–3484.CrossRefGoogle Scholar
  42. [42]
    Prakash P, Mohandas T, Raju PD. Microstructural characterization of SiC ceramic and SiC-metal active metal brazed joints. Scripta Mater 2005, 52: 1169–1173.CrossRefGoogle Scholar
  43. [43]
    Liu Y, Zhu YZ, Yang Y, et al. Microstructure of reaction layer and its effect on the joining strength of SiC/SiC joints brazed using Ag–Cu–In–Ti alloy. J Adv Ceram 2014, 3: 71–75.CrossRefGoogle Scholar
  44. [44]
    Moszner F, Mata-Osoro G, Chiodi M, et al. Mechanical behavior of SiC joints brazed using an active Ag–Cu–In–Ti braze at elevated temperatures. Int J Appl Ceram Technol 2017, 14: 703–711.CrossRefGoogle Scholar
  45. [45]
    Lv H, Kang ZJ, Chu JX, et al. Microstructure and strength of SiC/Nb joint with Cu based brazing filler metal. Trans Chin Weld Inst 2005, 26: 29–31.Google Scholar
  46. [46]
    Südmeyer I, Hettesheimer T, Rohde M. On the shear strength of laser brazed SiC–steel joints: Effects of braze metal fillers and surface patterning. Ceram Int 2010, 36: 1083–1090.CrossRefGoogle Scholar
  47. [47]
    Tian WB, Sun ZM, Zhang P, et al. Brazing of silicon carbide ceramics with Ni–Si–Ti powder mixtures. J Aust Ceram Soc 2017, 53: 511–516.CrossRefGoogle Scholar
  48. [48]
    Xiong HP, Mao W, Xie YH, et al. Control of interfacial reactions and strength of the SiC/SiC joints brazed with newly-developed Co-based brazing alloy. J Mater Res 2007, 22: 2727–2736.CrossRefGoogle Scholar
  49. [49]
    Xiong HP, Mao W, Xie YH, et al. Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si,B)CrTi filler metal. Mater Lett 2007, 61: 4662–4665.CrossRefGoogle Scholar
  50. [50]
    Chen XG, Xie RS, Lai ZW, et al. Interfacial structure and formation mechanism of ultrasonic-assisted brazed joint of SiC ceramics with Al–12Si filler metals in air. J Mater Sci Technol 2017, 33: 492–498.CrossRefGoogle Scholar
  51. [51]
    Chen XG, Yan JC, Ren SC, et al. Ultrasonic-assisted brazing of SiC ceramic to Ti–6Al–4V alloy using a novel AlSnSiZnMg filler metal. Mater Lett 2013, 105: 120–123.CrossRefGoogle Scholar
  52. [52]
    Chen XG, Yan JC, Ren SC, et al. Microstructure, mechanical properties, and bonding mechanism of ultrasonic-assisted brazed joints of SiC ceramics with ZnAlMg filler metals in air. Ceram Int 2014, 40: 683–689.CrossRefGoogle Scholar
  53. [53]
    Koltsov A, Hodaj F, Eustathopoulos N. Brazing of AlN to SiC by a Pr silicide: Physicochemical aspects. Mat Sci Eng A 2008, 495: 259–264CrossRefGoogle Scholar
  54. [54]
    Riccardi B, Nannetti CA, Petrisor T, et al. Issues of low activation brazing of SiCf/SiC composites by using alloys without free silicon. J Nucl Mater 2004, 329: 562–566.CrossRefGoogle Scholar
  55. [55]
    Li HX, Wang ZQ, Zhong ZH, et al. Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium–silicon eutectic alloy. J Alloys Compd 2018, 738: 354–362.CrossRefGoogle Scholar
  56. [56]
    Li WW, Chen B, Xiong HP, et al. Brazing SiC matrix composites using Co–Ni–Nb–V alloy. Weld World 2017, 61: 839–846.CrossRefGoogle Scholar
  57. [57]
    Mao YW, Li SJ, Han WB. Joining of SiC by high temperature brazing with Ni–51Cr filler. Rare Metal Mater Eng 2006, 35: 312–315.Google Scholar
  58. [58]
    Mao YW, Li SJ, Han WB. Joining of recrystallized SiC ceramic using Ni–Cr–Nb powders as filler. Rare Metal Mater Eng 2009, 38: 276–279.Google Scholar
  59. [59]
    Chen B, Xiong HP, Mao W, et al. Microstructures and property of SiC/SiC joints brazed with PdNi–Cr–V brazing filler. Acta Metall Sin 2007, 43: 1181–1185.Google Scholar
  60. [60]
    Wang Q, Li QH, Sun DL, et al. Microstructure and mechanical properties of SiC/Ti diffusion bonding joints under electric field. Rare Metal Mater Eng 2016, 45: 1749–1754.CrossRefGoogle Scholar
  61. [61]
    Jung YI, Park JH, Kim HG, et al. Effect of Ti and Si interlayer materials on the joining of SiC ceramics. Nucl Eng Technol 2016, 48: 1009–1014.CrossRefGoogle Scholar
  62. [62]
    Cockeram BV. Flexural strength and shear strength of silicon carbide to silicon carbide joints fabricated by a molybdenum diffusion bonding technique. J Am Ceram Soc 2005, 88: 1892–1899.CrossRefGoogle Scholar
  63. [63]
    Kim JH, Kim DS, Lim ST, et al. Interfacial microstructure of diffusion-bonded SiC and Re with Ti Interlayer. J Alloys Compd 2017, 701: 316–320.CrossRefGoogle Scholar
  64. [64]
    Kurumada A, Imamura Y, Tomota Y, et al. Evaluation of the integrity of divertor models of tungsten or SiC/SiC composites joined with copper. J Nucl Mater 2003, 313: 245–249.CrossRefGoogle Scholar
  65. [65]
    Ji X Q, Li SJ, Ma TY, et al. Joining of SiC ceramic to Ni-based superalloy with Zr/Nb multiple interlayers. J Chin Ceram Soc 2002, 30: 305–310.Google Scholar
  66. [66]
    Tenyama K, Maeda M, Shibayanagi T, et al. Interfacial microstructure of silicon carbide and titanium aluminide joints produced by solid-state diffusion bonding. Mater Trans 2004, 45: 2734–2739.CrossRefGoogle Scholar
  67. [67]
    Liu HJ, Feng JC. Diffusion bonding of SiC ceramic to TiAl-based alloy. J Mater Sci Lett 2001, 20: 815–817.CrossRefGoogle Scholar
  68. [68]
    Feng JC, Liu HJ, Naka M, et al. Interface structure and formation mechanism of diffusion-bonded SiC/Ni–Cr joint. J Mater Sci Lett 2001, 20: 301–302.CrossRefGoogle Scholar
  69. [69]
    Feng JC, Liu HJ, Naka M, et al. Reaction products and growth kinetics during diffusion bonding of SiC ceramic to Ni–Cr alloy. Mater Sci Technol 2003, 19: 137–142.CrossRefGoogle Scholar
  70. [70]
    Li JQ, Zhu GM, Xiao P. Joining reaction-bonded silicon carbide using Inconel 600 superalloy. J Mater Sci Lett 2003, 22: 759–761.CrossRefGoogle Scholar
  71. [71]
    Zhong ZH, Hinoki T, Kohyama A, et al. Joining of silicon carbide to ferritic stainless steel using a W–Pd–Ni interlayer for high-temperature applications. Int J Appl Ceram Technol 2010, 7: 338–347.CrossRefGoogle Scholar
  72. [72]
    Li HX, Zhong ZH, Zhang HB, et al. Microstructure characteristic and its influence on the strength of SiC ceramic joints diffusion bonded by spark plasma sintering. Ceram Int 2018, 44: 3937–3946.CrossRefGoogle Scholar
  73. [73]
    Liu GW, Muolo ML, Valenza F, et al. Survey on wetting of SiC by molten metals. Ceram Int 2010, 36: 1177–1188.CrossRefGoogle Scholar
  74. [74]
    Hynes NRJ, Velu PS, Kumar R, et al. Investigate the influence of bonding temperature in transient liquid phase bonding of SiC and copper. Ceram Int 2017, 43: 7762–7767.CrossRefGoogle Scholar
  75. [75]
    Liu GW, Valenza F, Muolo ML, et al. SiC/SiC and SiC/Kovar joining by Ni–Si and Mo interlayers. J Mater Sci 2010, 45: 4299–4307.CrossRefGoogle Scholar
  76. [76]
    Zhang JJ, Li SJ, Duan HP, et al. Effects of technological parameters on the joining strength of SiC ceramic by hot pressing reaction welding. Rare Metal Mater Eng 2003, 32: 542–545.Google Scholar
  77. [77]
    Duan HP, Li SJ, Zhang YG, et al. Investigation on welding process of SiC ceramic with Ni-based superalloy using Gleeble 1500 thermo-mechanical testing machine. Chin J Rare Metal 1999, 23: 326–329.Google Scholar
  78. [78]
    Lin YC, McGinn PJ, Mukasyan AS. High temperature rapid reactive joining of dissimilar materials: Silicon carbide to an aluminum alloy. J Eur Ceram Soc 2012, 32: 3809–3818.CrossRefGoogle Scholar
  79. [79]
    Gianchandani PK, Casalegno V, Smeacetto F, et al. Pressure-less joining of C/SiC and SiC/SiC by a MoSi2/Si composite. Int J Appl Ceram Technol 2017, 14: 305–312.CrossRefGoogle Scholar
  80. [80]
    Lin GB, Huang JH, Zhang JG, et al. Microstructure of reactive composite brazing joints of SiC ceramics and Ti alloy by using Ag–Cu–Ti–(Ti+C) as bonding material. Chin J Nonfer Metal 2005, 15: 1326–1331.Google Scholar
  81. [81]
    Dai XY, Cao J, Chen Z, et al. Brazing SiC ceramic using novel B4C reinforced Ag–Cu–Ti composite filler. Ceram Int 2016, 42: 6319–6328.CrossRefGoogle Scholar
  82. [82]
    Dai XY, Cao J, Tian YT, et al. Effect of holding time on microstructure and mechanical properties of SiC/SiC joints brazed by Ag–Cu–Ti+B4C composite filler. Mater Charact 2016, 118: 294–301.CrossRefGoogle Scholar
  83. [83]
    Ma Q, Li ZR, Wang ZY, et al. Relieving residual stress in brazed joint between SiC and Nb using a 3D-SiO2-fiber ceramic interlayer. Vacuum 2018, 149: 93–95.CrossRefGoogle Scholar
  84. [84]
    Liu Y, Qi Q, Zhu YZ, et al. Microstructure and joining strength evaluation of SiC/SiC joints brazed with SiCp/Ag–Cu–Ti hybrid tapes. J Adhes Sci Technol 2015, 29: 1563–1571.CrossRefGoogle Scholar
  85. [85]
    Mao YW, Li SJ, Yan LS. Joining of SiC ceramic to graphite using Ni–Cr–SiC powders as filler. Mat Sci Eng A 2008, 491: 304–308.CrossRefGoogle Scholar
  86. [86]
    Tian WB, Kita H, Kondo N, et al. Effect of composition and joining parameters on microstructure and mechanical properties of silicon carbide joints. J Ceram Soc Jpn 2010, 118: 799–804.CrossRefGoogle Scholar
  87. [87]
    Tian WB, Kita H, Hyuga H, et al. Reaction joining of SiC ceramics using TiB2-based composites. J Eur Ceram Soc 2010, 30: 3203–3208.CrossRefGoogle Scholar
  88. [88]
    Tian WB, Kita H, Hyuga H, et al. Joining of SiC by Al infiltrated TiC tape: Effect of joining parameters on the microstructure and mechanical properties. J Eur Ceram Soc 2012, 32: 149–156.CrossRefGoogle Scholar
  89. [89]
    Rosa R, Veronesi P, Han S, et al. Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results. J Eur Ceram Soc 2013, 33: 1707–1719.CrossRefGoogle Scholar
  90. [90]
    Katoh Y, Kotani M, Kohyama A, et al. Microstructure and mechanical properties of low-activation glass-ceramic joining and coating for SiC/SiC composites. J Nucl Mater 2000, 283: 1262–1266.CrossRefGoogle Scholar
  91. [91]
    Ferraris M, Salvo M, Casalegno V, et al. Joining of SiC-based materials for nuclear energy applications. J Nuc Mater 2011, 417: 379–382.CrossRefGoogle Scholar
  92. [92]
    Ferraris M, Salvo M, Rizzo S, et al. Torsional shear strength of silicon carbide components pressurelessly joined by a glass-ceramic. Int J Appl Ceram Technol 2012, 9: 786–794.CrossRefGoogle Scholar
  93. [93]
    Ferraris M, Ventrella A, Salvo M, et al. Torsional shear strength tests for glass-ceramic joined silicon carbide. Int J Appl Ceram Technol 2015, 12: 693–699.CrossRefGoogle Scholar
  94. [94]
    Lippmann W, Knorr J, Wolf R, et al. Laser joining of silicon carbide—a new technology for ultra-high temperature resistant joints. Nucl Eng Des 2004, 231: 151–161.CrossRefGoogle Scholar
  95. [95]
    Herrmann M, Lippmann W, Hurtado A. High-temperature stability of laser-joined silicon carbide components. J Nucl Mater 2013, 443: 458–466.CrossRefGoogle Scholar
  96. [96]
    Ferraris M, Casalegno V, Rizzo S, et al. Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications. J Nucl Mater 2012, 429: 166–172.CrossRefGoogle Scholar
  97. [97]
    Schaafhausen S, Börner FD, Chand T, et al. Corrosion of laser joined silicon carbide in gasification environment. Adv Appl Ceram 2015, 114: 350–360.CrossRefGoogle Scholar
  98. [98]
    Herrmann M, Lippmann W, Hurtado A. Y2O3–Al2O3–SiO2-based glass-ceramic fillers for the laser-supported joining of SiC. J Eur Ceram Soc 2014, 13:1935–1948.Google Scholar
  99. [99]
    Fan SW, Liu JL, Ma X, et al. Microstructure and properties of SiCf/SiC joint brazed by Y–Al–Si–O glass. Ceram Int 2018, 44: 8656–8663.CrossRefGoogle Scholar
  100. [100]
    Ahmad S, Herrmann M, Mahmoud MM, et al. Application of Nd2O3–Al2O3–SiO2 glass solder for joining of silicon carbide components. J Eur Ceram Soc 2016, 36: 1559–1569.CrossRefGoogle Scholar
  101. [101]
    Herrmann M, Ahmad S, Lippmann W, et al. Rare earth (RE: Nd, Dy, Ho, Y, Yb, and Sc) aluminosilicates for joining silicon carbide components. Int J Appl Ceram Technol 2017, 14: 675–691.CrossRefGoogle Scholar
  102. [102]
    Luo ZH, Jiang DL, Zhang JX, et al. Investigation of interfacial bonding between Na2O–B2O3–SiO2 solder and silicon carbide Substrate. Sci Technol Weld Joining 2011, 16: 592–596.CrossRefGoogle Scholar
  103. [103]
    Luo ZH, Jiang DL, Zhang JX, et al. Joining of sintered silicon carbide ceramics using sodium borosilicate glass as the solder. Int J Appl Ceram Technol 2012, 9: 742–750.CrossRefGoogle Scholar
  104. [104]
    Luo ZH, Jiang DL, Zhang JX, et al. Thermal shock behavior of the SiC–SiC joints joined with Na2O–B2O3–SiO2 glass solder. J Inorg Mater 2012, 27: 234–238.CrossRefGoogle Scholar
  105. [105]
    Jung HC, Park YH, Park JS, et al. R&D of joining technology for SiC components with channel. J Nucl Mater 2009, 386–388: 847–851.CrossRefGoogle Scholar
  106. [106]
    Jung HC, Hinoki T, Katoh Y, et al. Development of a shear strength test method for NITE–SiC joining material. J Nucl Mater 2011, 417: 383–386.CrossRefGoogle Scholar
  107. [107]
    Yoon HK, Jung HC, Hinoki T, et al. Characteristics of shear strength for joined SiC–SiC ceramics. Trans Korean Soc Mech Eng A 2014, 38: 483–487.CrossRefGoogle Scholar
  108. [108]
    Tian WB, Kita H, Hyuga H, et al. Joining of SiC by tape-cast SiC–Al2O3–Y2O3 interlayer. Key Eng Mater 2011, 484: 26–31.CrossRefGoogle Scholar
  109. [109]
    Dong HY, Yu YD, Jin XL, et al. Microstructure and mechanical properties of SiC–SiC joints joined by spark plasma sintering. Ceram Int 2016, 42: 14463–14468.CrossRefGoogle Scholar
  110. [110]
    Zhou XB, Han YH, Shen XF, et al. Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology. J Nucl Mater 2015, 466: 322–327.CrossRefGoogle Scholar
  111. [111]
    Tatarko P, Chlup Z, Mahajan A, et al. High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding. J Eur Ceram Soc 2017, 37: 1205–1216.CrossRefGoogle Scholar
  112. [112]
    Henager CH, Kurtz RJ. Low-activation joining of SiC/SiC composites for fusion applications. J Nucl Mater 2011, 417: 375–378.CrossRefGoogle Scholar
  113. [113]
    Henager CH, Shin Y, Bium Y, et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems. J Nucl Mater 2007, 367: 1139–1143.CrossRefGoogle Scholar
  114. [114]
    Yu YD, Dong HY, Ma BL, et al. Effect of different filler materials on the microstructure and mechanical properties of SiC–SiC joints joined by spark plasma sintering. J Alloys Compd 2017, 708: 373–379.CrossRefGoogle Scholar
  115. [115]
    Zhang AF, Chen YC, Chen ZQ, et al. Joining of silicon carbide ceramic for optical application by reaction bonded technology. In Proceedings of the 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. International Society for Optics and Photonics, 2010, 7654: 765410.CrossRefGoogle Scholar
  116. [116]
    Tian WB, Kita H, Hyuga H, et al. Joining of SiC with Si infiltrated tape-cast TiB2–C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties. Mat Sci Eng A 2011, 530: 580–584.CrossRefGoogle Scholar
  117. [117]
    Wu QD, Sun F, Ji XL, et al. Joining of pure carbide reaction-bonded silicon carbide ceramics. Rare Metal Mater Eng 2005, 34: 515–518.Google Scholar
  118. [118]
    Wu QD, Sun F, Tian TY, et al. Effect of welding solder properties on joining of reaction-bonded silicon carbide. J Chin Ceram Soc 2006, 34: 796–800.Google Scholar
  119. [119]
    Lewinsohn CA, Singh M, Shibayama T, et al. Joining of silicon carbide composites for fusion energy applications. J Nucl Mater 2000, 283–287: 1258–1261.CrossRefGoogle Scholar
  120. [120]
    Liu HL, Li S J. Joining of SiC and SiC-based composites using preceramic ploymers. J Chin Ceram Soc 2004, 32: 1246–1251.Google Scholar
  121. [121]
    Colombo P, Riccardi B, Donato A, et al. Joining of SiC/SiCf ceramic matrix composites for fusion reactor blanket applications. J Nucl Mater 2000, 278: 127–135.CrossRefGoogle Scholar
  122. [122]
    Liu HL, Li SJ, Chen ZJ. Joining of reaction-bonded silicon carbide using a polysiloxane. Rare Metal Mater Eng 2006, 35: 134–137.Google Scholar
  123. [123]
    Yuan XK, Chen S, Zhang XH, et al. Joining SiC ceramics with silicon resin YR3184. Ceram Int 2009, 35: 3241–3245.CrossRefGoogle Scholar
  124. [124]
    Tang B, Wang MC, Liu RM, et al. A heat-resistant preceramic polymer with broad working temperature range for silicon carbide joining. J Eur Ceram Soc 2018, 38: 67–74.CrossRefGoogle Scholar
  125. [125]
    Zhou BF, Feng KQ, Zhou HL, et al. Joining of SiC ceramic by using the liquid polyvinylphenylsiloxane. Adv Appl Ceram 2018, 117: 212–216.CrossRefGoogle Scholar
  126. [126]
    Liu HL, Li S J, Zhang T, et al. Joining of reaction-bonded silicon carbide using SiC/Si3N4 preceramic polymer. Rare Metal Mater Eng 2005, 34: 1469–1472.Google Scholar
  127. [127]
    Liu HL, Li S J, Li XG. Effect of nickel nanopowders addition on joining property of silicon carbide to itself by polysilazane. Rare Metal Mater Eng 2005, 34: 1905–1908.Google Scholar
  128. [128]
    Wang XZ, Wang J, Wang H. Synthesis of a novel preceramic polymer (V-PMS) and its performance in heat-resistant organic adhesives for joining SiC ceramic. J Eur Ceram Soc 2012, 32: 3415–3422.CrossRefGoogle Scholar
  129. [129]
    Wang XZ, Wang J, Wang H. Preparation of high-temperature organic adhesives and their performance for joining SiC ceramic. Ceram Int 2013, 39: 1365–1370.CrossRefGoogle Scholar
  130. [130]
    Wang XZ, Wang J, Wang H. Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS). Ceram Int 2015, 41: 7283–7288.CrossRefGoogle Scholar
  131. [131]
    Zheng J, Beckman SP, Gray JN, et al. X-ray tomography study on green state joining of silicon carbide using polymer precursors. J Am Ceram Soc 2001, 84: 1961–1967.CrossRefGoogle Scholar
  132. [132]
    Zheng J, Akinc M. Green state joining of SiC without applied pressure. J Am Ceram Soc 2001, 84: 2479–2483.CrossRefGoogle Scholar
  133. [133]
    Khalifa HE, Koyanagi T, Jacobsen GM, et al. Radiation stable, hybrid, chemical vapor infiltration/preceramic polymer joining of silicon carbide components. J Nucl Mater 2017, 487: 91–95.CrossRefGoogle Scholar

Copyright information

© The Author(s) 2019

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Authors and Affiliations

  • Guiwu Liu
    • 1
    Email author
  • Xiangzhao Zhang
    • 1
  • Jian Yang
    • 1
  • Gunjun Qiao
    • 1
    • 2
  1. 1.School of Materials Science and EngineeringJiangsu UniversityZhenjiangChina
  2. 2.State Key Laboratory for Mechanical Behavior of MaterialsXi’an Jiaotong UniversityXi’anChina

Personalised recommendations