Advertisement

Influence of Joint Orientation on the Behavior of Dam Resting on Jointed Rock Mass Under Static Condition

  • Saurabh Kumar
  • Prasun Halder
  • Bappaditya Manna
  • K. G. Sharma
Original Paper
  • 20 Downloads

Abstract

In this paper, elasto-plastic analyses of concrete gravity dam are performed to investigate the influences of intact rock, rock foundations with single set of joints (0°, 30°, 60°, 90°, 120° and 150°) and orthogonal set of joints (0°/90°, 30°/120°, 60°/150°) on the stress-deformation behavior of such dam. Discrete element analyses are carried out using UDEC (1993) for two specific static load combinations (LC) i.e. considering dead weight of the dam having empty reservoir (LC-A) and considering dead weight of the dam along with full reservoir condition (LC-B) as per IS: 6512 (Criteria for solid gravity dams, Bureau of Indian Standard, New Delhi, 1984). The orientations and spacing of the single and orthogonal joints in the rock masses are found to play vital roles in stress generation and deformation characteristics within the dam body. For all the dam foundations, the compressive stresses are found greater in magnitude at the heel of the dam than the toe for load combination A whereas, under load combination B, the stresses are higher at the toe of the dam than the heel. The rock foundations having 30°/120° and 0°/90° orthogonal set of joints are found to be critical in terms of possessing maximum compressive stresses in the dam body for load combinations A and B respectively. The magnitude of principal stresses is observed to follow an increasing pattern as the spacing between the joints decreases for all the rock foundations.

Keywords

Concrete gravity dam Elastic behavior Joint orientation DEM technique Stress-deformation 

References

  1. 1.
    Jing L, Stephansson O (2007) Fundamentals of discrete element methods for rock engineering: theory and applications. Elsevier, RotterdamGoogle Scholar
  2. 2.
    Noorishad J, Ayatollahi MS, Witherspoon PA (1982) A finite element method for coupled stress and fluid flow analysis in fractured rock mass. Int J Rock Mech Min Sci 19:185–193CrossRefGoogle Scholar
  3. 3.
    Ng KLA, Small JC (1997) Behavior of joints and interfaces subjected to water pressure. Comput Geotech 20(1):71–93CrossRefGoogle Scholar
  4. 4.
    Callari C, Fois N, Cicivelli R (2004) The role of hydromechanical coupling in the behavior of dam foundation system. In: Proceedings of the VI world congress on computational mechanics, Pequim, China, pp 1–11Google Scholar
  5. 5.
    Cammarata G, Fidelibus C, Cravero M, Barla G (2007) The Hydro mechanically coupled response of rock fractures. Rock Mech Rock Eng 40(1):41–61CrossRefGoogle Scholar
  6. 6.
    Bondarchuk A, Dahlstro L, Nordlund OE (2011) Rock mass behavior under hydropower embankment dams: a two-dimensional numerical study. Rock Mech Rock Eng 45:819–835Google Scholar
  7. 7.
    Latham JP, Xiang J, Belayneh M, Nick HM, Tsang CF, Blunt MJ (2013) Modelling stress dependent permeability in fractured rock including effects of propagating and bending fractures. Int J Rock Mech Min Sci 57:100–112Google Scholar
  8. 8.
    Huang J, Aspasia Z (2013) Earthquake performance assessment of concrete gravity dams subjected to spatially varying seismic ground motions. Struct Infrastruct Eng 10:1011–1026CrossRefGoogle Scholar
  9. 9.
    Bretas E, Lemos JV, Lourenco P (2013) Hydromechanical analysis of masonry gravity dams and their foundations. Rock Mech Rock Eng 46:327–339CrossRefGoogle Scholar
  10. 10.
    IS: 6512 (1984) Criteria for solid gravity dams. Bureau of Indian Standard, New DelhiGoogle Scholar
  11. 11.
    Sharma R (2004) Dam–foundation interaction analysis with joints and seams using UDEC. M Tech Thesis, IIT Delhi, New Delhi, IndiaGoogle Scholar
  12. 12.
    Itasca Consulting group, Inc. (1993) Universal Distinct Element Code (UDEC) user’s manual, ver.4.0, MinneapolisGoogle Scholar

Copyright information

© Indian Geotechnical Society 2018

Authors and Affiliations

  • Saurabh Kumar
    • 1
  • Prasun Halder
    • 1
  • Bappaditya Manna
    • 1
  • K. G. Sharma
    • 1
  1. 1.Department of Civil EngineeringIndian Institute of Technology DelhiHauz Khas, New DelhiIndia

Personalised recommendations