Testing and Modelling of Screw Nailed Soil Slopes
- 164 Downloads
Abstract
This paper aims at testing and numerical modelling of soil slopes reinforced by using screw nails. Two model soil slopes at 45° and 90° with the horizontal are stabilized by inclusion of six screw nails at 0° inclination with horizontal. The screw nailed soil slopes are subjected to an increasing surcharge load at slope crest and their failure mechanism is studied. The present investigation also examines the failure load and displacement, failure surface and volumetric deformation of screw nailed slopes. Numerical modelling of the two screw nailed slopes using limit equilibrium method and generalized finite element analysis method has also been carried out. Factor of safety along with failure slip surfaces has been analysed by limit equilibrium method. Generalized finite element analysis is used with strength reduction method to determine factor of safety and slip surfaces. The slope displacement, failure load and volumetric deformation of these two screw nailed slopes are also studied by generalized finite element analysis method. The model testing results are validated by its numerical modelling. It is found that factor of safety, slip surfaces, load–displacements from testing and modelling are in accordance with slight variations. A comparative study between factor of safety and load–displacement of slopes with smooth nails and screw nails under study is also done. A higher factor of safety and a decrease in slope displacement is observed for screw nailed slopes. With the advantage of ease of installation, the screw nails are found to provide sufficient slope stability for the two modelled slopes.
Keywords
Testing Modelling Screw nail Slope stability Failure mechanismReferences
- 1.Luo SQ, Tan SA, Yong KY (2000) Pull-out resistance mechanism of a soil nail reinforcement in dilative soils. Soil Found Jpn Geotech Soc 40(1):47–56CrossRefGoogle Scholar
- 2.Zhou WH, Yin JH, Hong CY (2011) Finite element modelling of pullout testing on a soil nail in a pullout box under different overburden and grouting pressures. Can Geotech J 48(4):557–567CrossRefGoogle Scholar
- 3.Tokhi H (2016) A study of new screw soil nail. Dissertation, RMIT University, MelbourneGoogle Scholar
- 4.Prashant A, Mukherjee M (2010) Soil nailing for stabilization of steep slopes near railway tracks. Research Design and Standard Organisation, LucknowGoogle Scholar
- 5.Shaw-Shong L (2005) Soil nailing for slope strengthening. Geotechnical Engineering Gue & Partners Sdn Bhd, Kuala LumpurGoogle Scholar
- 6.Wang Z, Richwien W (2002) A study of soil-reinforcement interface friction. J Geotech Geoenviron Eng 128(1):92–94CrossRefGoogle Scholar
- 7.Gosavi M, Saran S, Mittal S (2008) Evaluation of apparent co-efficient of friction between soil and nails. In: Proceedings of the 12th international conference of the international association for computer methods and advances in geomechanics (IACMAG), Goa, pp 1346–1354Google Scholar
- 8.Cartier G, Gigan JP (1983) Experiments and observations on soil nailing structures. In: Paper presented at the 8th European conference on soil mechanics and foundation engineering, Helsinki, FinlandGoogle Scholar
- 9.Milligan GWE, Tei K (1998) The pull-out resistance of model soil nails. Soils Found 38(2):179–190CrossRefGoogle Scholar
- 10.Franzén G (1998) Soil nailing. A laboratory and field study of pullout capacity. Doctoral dissertation, Chalmers University of TechnologyGoogle Scholar
- 11.Junaideen SM, Tham LG, Law KT, Lee CF, Yue ZQ (2004) Laboratory study of soil–nail interaction in loose, completely decomposed granite. Can Geotech J 41(2):274–286CrossRefGoogle Scholar
- 12.Pradhan B (2003) Study of the pull-out behaviour of soil nails in completely decomposed granite fill. M.Phil., University of Hong KongGoogle Scholar
- 13.Su L, Chan T, Yin J, Shiu Y, Chiu S (2008) Influence of overburden pressure on soil–nail pullout resistance in a compacted fill. J Geotech Geoenviron Eng 134(9):1339–1347CrossRefGoogle Scholar
- 14.Wu JY, Zhang ZM (2009) Evaluations of pullout resistance of grouted soil nails. In: Ge L, Liu J, Ni JC, Yi He Z (eds) Slope stability, retaining walls, and foundations; Selected papers from the 2009 GeoHunan internatinal conference. American Society of Civil Engineers (ASCE), Reston, USA, pp 108–114Google Scholar
- 15.Hong CY, Yin JH, Pei HF (2013) Comparative study on pullout behaviour of pressure grouted soil nails from field and laboratory tests. J Cent South Univ 20:2285–2292CrossRefGoogle Scholar
- 16.Chu LM, Yin JH (2005) Comparison of interface shear strength of soil nails measured by both direct shear box tests and pullout tests. J Geotech Geoenviron Eng 131(9):1097–1107CrossRefGoogle Scholar
- 17.Kim D, Juran I, Nasimov R, Drabkin S (1995) Model study on the failure mechanism of soil-nailed structure under surcharge loading. Geotech Test J 18(4):421–430CrossRefGoogle Scholar
- 18.Kodaka T, Akira A, Pokharel G (1995) Model tests and theoretical analysis of reinforced soil slopes with facing panels. Soils Found Jpn Soc Soil Mech Found Eng 35(1):133–145Google Scholar
- 19.Gosavi M, Saran S, Mittal S (2009) Model tests for validation of analysis of nailed cuts. Indian Geotech J 39(1):96–116Google Scholar
- 20.Rawat S, Zodinpuii R, Manna B, Sharma KG (2014) Investigation on failure mechanism of nailed soil slopes under surcharge loading: testing and analysis. Geomech Geoeng 9(1):18–35CrossRefGoogle Scholar
- 21.Rawat S, Gupta AK (2016) An experimental and analytical study of slope stability by soil nailing. Electron J Geotech Eng 21(17):5577–5597Google Scholar
- 22.Zhang M, Song E, Chen Z (1999) Ground movement analysis of soil nailing construction by three-dimensional (3-D) finite element modeling (FEM). Comput Geotech 25(4):191–204CrossRefGoogle Scholar
- 23.Srinivasa Murthy BR, Sivakumar Babu GL, Srinivas A (2002) Analysis of prototype soil-nailed retaining wall. Proc Inst Civ Eng Ground Improv 6(3):129–136CrossRefGoogle Scholar
- 24.Fan CC, Luo JH (2008) Numerical study on the optimum layout of soil nailed slopes. Comput Geotech 35(4):585–599CrossRefGoogle Scholar
- 25.Rotte V, Viswanadham B, Chourasia D (2011) Influence of slope geometry and nail parameters on the stability of soil-nailed slopes. Int J Geotech Eng 5(3):267–281CrossRefGoogle Scholar
- 26.Chan CM, Raman MHA (2017) Screw-in soil nail for slope reinforcement against slip failure: a lab-based model study. Int J 12(29):148–155Google Scholar
- 27.Bruce DA, Jewell RA (1986) Soil nailing: application and practice-part 1. Ground Eng 19(8):10–15Google Scholar
- 28.Gosavi MS (2006) Behaviour of nailed open cuts. Doctoral dissertation, Indian Institute of Technology, RoorkeeGoogle Scholar
- 29.Zhang G, Cao J, Wang L (2014) Failure behavior and mechanism of slopes reinforced using soil nail wall under various loading conditions. Soils Found 54(6):1175–1187CrossRefGoogle Scholar
- 30.Plumelle C, Schlosser F (1990) A French national research project on soil nailing: CLOUTERRE. In: Performance of reinforced soil structures proceedings of international reinforced soil conference, Glassgow, pp 219–223Google Scholar
- 31.Byrne RJ, Cotton D, Porterfield J, Wolschlag C, Ueblacker G (1996) Manual for design and construction monitoring of soil nail walls. No. FHWA-SA-96-069Google Scholar
- 32.Gosavi M, Saran S, Mittal S (2009) Pseudo-static analysis of soil nailed excavations. Geotech Geol Eng 27(4):571–583CrossRefGoogle Scholar
- 33.Tei K (1993) A study of soil nailing in sand. Doctoral dissertation, Magdalen College, University of OxfordGoogle Scholar
- 34.Kulhawy FH, Peterson MS (1979) Behavior of sand-concrete interfaces. In: Proceedings of 6th Pan-American conference on soil mechanics and foundation engineering vol. 7, pp 225–236Google Scholar
- 35.FHWA (2003) Geotechnical engineering circular No. 7—soil nail walls. Report FHWA0-IF-03–017. US Department of Transportation Federal Highway Administration, Washington DCGoogle Scholar
- 36.SLOPE/W (2001) A software package for slope stability analysis, Ver. 5. Geo-Slope International, Calgary, AltaGoogle Scholar
- 37.Hubble Power Systems Inc (2015) Screw nailing retention earth structures. Design manual, CHANCE USAGoogle Scholar
- 38.Brinkgreve RBJ (ed) (2002) Plaxis: finite element code for soil and rock analyses: 2D-Version 8. User’s Guide BalkemaGoogle Scholar
- 39.Shiu YK, Chang GWK (2006) Effects of inclination, length pattern and bending stiffness of soil nails on behavior of nailed structures. GEO Report No.197 Geotchnical Engineering Office, Hong KongGoogle Scholar
- 40.Chmoulian AY (2015) Effect of axial stiffness on soil nail forces. Proc Inst Civ Eng Geotech Eng 168(1):42–52CrossRefGoogle Scholar
- 41.Babu GS, Singh VP (2009) Simulation of soil nail structures using PLAXIS 2D. Plaxis Bull 25:16–21Google Scholar
- 42.Geoguide 7 (2008) Guide to soil nail design and construction. Geotechnical Engineering Office, Civil Engineering and Development Department, The Government of the Hong Kong Special Administrative RegionGoogle Scholar
- 43.Rawat S, Gupta AK (2016) Analysis of a nailed soil slope using limit equilibrium and finite element methods. Int J Geosynth Ground Eng 2(4):34CrossRefGoogle Scholar
- 44.Schlosser F (1982) Behaviour and design of soil nailing. In: Symposium on recent developments in ground improvement techniques, Bangkok, pp 399–413Google Scholar
- 45.Gassler G, Gudehus G (1981) Soil nailing—some aspects of new technique. In: Proceedings of tenth ICSMFE, Stockholm, Balkema, pp 943–962Google Scholar