Advertisement

Fracture Toughness and Shear Strength of the Bonded Interface Between an Aluminium Alloy Skin and a FRP Patch

  • Prashant Kumar
  • Prakash Sonyabapu ShindeEmail author
  • Gaurav Bhoyar
Original Contribution
  • 66 Downloads

Abstract

The existing techniques to determine the fracture properties such as critical energy release rate in mode I (GIc) and mode II (GIIc) of an interface between two sheets of same material were modified to determine these properties between the sheets of dissimilar materials and thickness. In addition, the interface shear strength (ISS) was also determined. Experiments were carried out on the specimens made of a pre-cracked thin aluminium alloy skin and a Fiber reinforced polymer (FRP) patch. Two kinds of surface preparation of the aluminium skin were employed; (i) emery-paper roughened surface (ERS) and (ii) Sodium Hydroxide (NaOH) treated surface (NTS). GIc of ERS specimen was found to be 36.1 J/m2, while it was found to be much higher for NTS specimens, that is, 87.3 J/m2. GIIc was found to be 282.4 J/m2 for ERS specimens and much higher as 734.5 J/m2 for NTS specimens. ISS was determined as 32.6 MPa for ERS specimen and significantly higher for NTS specimen, that is, 44.5 MPa. The micrographs obtained from a field emission-scanning electron microscope (FE-SEM) and the surface roughness test showed that the NTS was significantly rougher than the ERS, explaining the higher values of all the three kinds of NTS specimens.

Keywords

Critical energy release rate Mode I Mode II Interfacial shear strength Bonded interface 

References

  1. 1.
  2. 2.
    H. Terryn, Aluminium surface pre-treatments, training in aluminium application technologies (TALAT) Lecture 5201 (1994)Google Scholar
  3. 3.
    N. Saleema, D.K. Sarkar, R.W. Paynter, D. Gallant, M. Eskandarian, A simple surface treatment and characterization of AA 6061 aluminium alloy surface for adhesive bonding applications. Appl. Surf. Sci. 261, 742–748 (2012)CrossRefGoogle Scholar
  4. 4.
    P. Kumar, Elements of Fracture Mechanics (Tata McGraw Hill, New Delhi, 2009), pp. 35–61Google Scholar
  5. 5.
    B.D. Davidson, S.J. Gharibian, Y.U. Lijie, Evaluation of energy release rate-based approaches for predicting delamination growth in laminated composites. Int. J. Fract. 105, 343–365 (2000)CrossRefGoogle Scholar
  6. 6.
    M.S. Prasad, C.S. Venkatesha, T. Jayaraju, Experimental methods of determining fracture toughness of fibre reinforced polymer composites under various loading conditions. J. Miner. Mater. Charact. Eng. 10(13), 1263–1275 (2011)Google Scholar
  7. 7.
    I.S. Raju, J.H. Crews Jr., M.A. Aminpou, Convergence of strain energy release rate components for edge-delaminated composite laminates. NASA Tech. Memo. 89135, 1–39 (1987)Google Scholar
  8. 8.
    J.L. Curiel-Sosa, B. Tafazzolimoghaddam, On the calculation of energy release rates in composite laminates by finite elements, boundary elements and analytical methods. Compos. Mech. Comput. Appl. 6(3), 219–237 (2015)CrossRefGoogle Scholar
  9. 9.
    J.A. Nairn, Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses. Int. J. Adhes. Adhes. 20, 59–70 (1999)CrossRefGoogle Scholar
  10. 10.
    N. Anagreh, A. Robaidi, Improvement in adhesion behaviour of aluminium due to surfaces treatment with arc discharge. J. Mech. Ind. Eng. 4(2), 330–339 (2010)Google Scholar
  11. 11.
    G.W. Critchlow, K.A. Yendall, D. Bahrani, A. Quinn, F. Andrews, Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys. Int. J. Adhes. Adhes. 26, 419–453 (2006)CrossRefGoogle Scholar
  12. 12.
    O. Lunder, F. Lapique, B. Johnsen, K. Nisancioglu, effect of pre-treatment on the durability of epoxy-bonded AA6060 aluminium joints. Int. J. Adhes. Adhes. 24, 107–117 (2004)CrossRefGoogle Scholar
  13. 13.
    E. Sancaktar, R. Gomatam, A study on the effects of surface roughness on the strength of single lap joints. J. Adhes. Sci. Technol. 15(1), 97–117 (2012)CrossRefGoogle Scholar
  14. 14.
    P. Cortes, W.J. Cantwell, The fracture properties of a fibre-metal laminate based on magnesium alloy. Compos. B 37, 63–170 (2006)CrossRefGoogle Scholar
  15. 15.
    S.B. Basturk, A. Guruscu, M. Tanoglu, Interfacial properties of aluminium/glass-fibre reinforced polypropylene sandwich composites. Mech. Compos. Mater. 49(3), 317–324 (2013)CrossRefGoogle Scholar
  16. 16.
    R. Kumar, P. Kumar, Joining of pipes using FRP—an experimental study. J. Inst. Eng. Mech. Eng. Div. 89, 7–25 (2008)Google Scholar
  17. 17.
    P.S. Shinde, P. Kumar, K.K. Singh, V.K. Tripathi, P.K. Sarkar, Experimental study of CFRP patches bonded on a cracked aluminum alloy panel. Compos. Interfaces 22(4), 233–248 (2015)CrossRefGoogle Scholar
  18. 18.
    P.S. Shinde, P. Kumar, K.K. Singh, V.K. Tripathi, P.K. Sarkar, The role of yield stress on cracked thin panels of aluminum alloys repaired with a FRP patch. J. Adhes. 93(5), 412–429 (2017)CrossRefGoogle Scholar
  19. 19.
    P.S. Shinde, P. Kumar, V.K. Tripathi, Dependence of repair strength on the size of FRP patch bonded to a cracked aluminum alloy panel. Thin Walled Struct. 124, 303–311 (2018)CrossRefGoogle Scholar
  20. 20.
    A.R. Rasane, P. Kumar, M.P. Khond, Optimising the size of a CFRP patch to repair a crack in a thin sheet. J. Adhes. (2016).  https://doi.org/10.1080/00218464.2016.1204236 CrossRefGoogle Scholar
  21. 21.
    S.H. Crandall, N.C. Dahl, T.J. Lardner, An Introduction to Mechanics of Solids (McGraw-Hill Book Company, Auckland, 1978), pp. 156–160Google Scholar

Copyright information

© The Institution of Engineers (India) 2018

Authors and Affiliations

  • Prashant Kumar
    • 1
  • Prakash Sonyabapu Shinde
    • 1
    Email author
  • Gaurav Bhoyar
    • 1
  1. 1.Department of Mechanical EngineeringCollege of Engineering PunePuneIndia

Personalised recommendations