Advertisement

Design and Control of a Multifunctional Grid-Connected Battery Energy Storage with Enhanced Performance Using SOGI

  • Sai PranithEmail author
  • Shailendra Kumar
  • Bhim Singh
  • T. S. Bhatti
Original Contribution
  • 14 Downloads

Abstract

This paper presents the design and control of a multifunctional two-stage grid-connected battery to provide peak shaving along with reactive power and harmonics compensation. The system comprises of a bidirectional converter and a grid-connected voltage source converter (VSC). The bidirectional converter is controlled to provide the battery charging and to maintain constant DC-link voltage. A peak shaving logic is developed, and a ‘dual-mode synchronous reference frame control’ is designed using a moving average filter to control the VSC to provide peak shaving along with reactive power and harmonics compensation. A second-order generalized integrator is utilized to enhance system performance both during steady state and during mode transitions. The performance of the grid-connected battery system is tested for various scenarios in both simulation and experimentation. Simulated and test results validate the effectiveness of the proposed control in achieving the set objectives.

Keywords

Peak shaving SOGI Battery Bidirectional converter Power quality 

Notes

References

  1. 1.
    J. Eyer, G. Corey, Energy storage for the electricity grid: benefits and market potential assessment guide. Report SAND2010-0815, Sandia National Laboratories, CA, 2010Google Scholar
  2. 2.
    P. Nayar, B. Singh, S. Mishra, Neural network based control of SG based standalone generating system with energy storage for power quality enhancement. J. Inst. Eng. Ser. B 98(4), 405–413 (2017)CrossRefGoogle Scholar
  3. 3.
    H. Rahimi-Eichi, U. Ojha, F. Baronti, M. Chow, Battery management system: an overview of its application in the smart grid and electric vehicles. IEEE Ind. Electron. Mag. 7, 4–16 (2013)CrossRefGoogle Scholar
  4. 4.
    E. Reihani, S. Sepasi, L.R. Roose, M. Matsuura, Energy management at the distribution grid using a battery energy storage system (BESS). Int. J. Electr. Power Energy Syst. 77, 337–344 (2016)CrossRefGoogle Scholar
  5. 5.
    E.C. McKinnon, Storage batteries: a review of their application. IEEE Trans. Electr. Eng. 87(525), 225–242 (1940)Google Scholar
  6. 6.
    B. Singh, S. Kumar, Harmonics mitigation and phase compensation technique for 3P4 W SPV system, in 2016 National Power Systems Conference (NPSC), Bhubaneswar, 2016, pp. 1–6Google Scholar
  7. 7.
    R. Sebastián, Application of a battery energy storage for frequency regulation and peak shaving in a wind diesel power system. IET Gener. Transm. Distrib. 10(3), 764–770 (2016)CrossRefGoogle Scholar
  8. 8.
    G. Wang, G. Konstantinou, C.D. Townsend, J. Pou, S. Georgios, V. Agelidis, A review of power electronics for grid connection of utility-scale battery energy storage systems. IEEE Trans. Sustain. Energy 7(4), 1778–1790 (2016)CrossRefGoogle Scholar
  9. 9.
    IEEE Standard for ‘Test Procedure for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications’, IEEE Std. 2030.3-2016, 2016Google Scholar
  10. 10.
    B. Singh, A. Chandra, K. Al-Haddad, Power Quality Problems and Mitigation Techniques (Wiley, London, 2015)CrossRefGoogle Scholar
  11. 11.
    B. Singh, J.A. Solanki, Comparison of control algorithms for DSTATCOM. IEEE Trans. Ind. Electron. 56(7), 2738–2745 (2009)CrossRefGoogle Scholar
  12. 12.
    S. Chakraborty, M.G. Simões, W.E. Kramer, Power Electronics for Renewable and Distributed Energy Systems (Springer, Berlin, 2013)CrossRefGoogle Scholar
  13. 13.
    D.W. Gao, Energy Storage for Sustainable Microgrid (Elsevier, Amsterdam, 2015)Google Scholar
  14. 14.
    Y. Fuad, W.L. De Koning, J.W. Van Der Woude, Pulse-width modulated D.C.–D.C. converters. Int. J. Electr. Eng. Educ. 38, 54–79 (2001)CrossRefGoogle Scholar
  15. 15.
    A. Chakraborty, S.K. Musunuri, A. Srivastava, A. Kondabathini, Integrating STATCOM and battery energy storage system for power system transient stability: a review and application. Adv. Power Electron. Art. no. 676010 (2012)Google Scholar
  16. 16.
    X. Tan, Q. Li, H. Wang, Advances and trends of energy storage technology in microgrid. Int. J. Electr. Power Energy Syst. 44(1), 179–191 (2013)CrossRefGoogle Scholar
  17. 17.
    M. Salehifar, G. Putrus, P. Barras, Analysis and comparison of conventional two-stage converter and single stage bridgeless AC–DC converter for off-road battery charger application, in IET Conference Publications, 2016Google Scholar
  18. 18.
    S. Devassy, B. Singh, Design and performance analysis of three phase solar PV integrated UPQC. IEEE Trans. Ind. Appl. 54(1), 73–81 (2018)CrossRefGoogle Scholar
  19. 19.
    B. Xie, K. Dai, D. Xiang, F. Xin, K. Yong, Application of moving average algorithm for shunt active power filter, in 2006 IEEE International Conference on Industrial Technology, 2006, pp. 1147–1151Google Scholar
  20. 20.
    V. Pires, D. Foito, A. Cordeiro, A DC–DC converter with quadratic gain and bidirectional capability for batteries/supercapacitors. IEEE Trans. Ind. Appl. 54(1), 274–285 (2018)CrossRefGoogle Scholar
  21. 21.
    S. Kumar, B. Singh, Seamless transition of three phase microgrid with load compensation capabilities, IEEE Industry Applications Society annual meeting, IEEE, 2017, pp. 1–9Google Scholar
  22. 22.
    P. Rodriguez, A. Luna, I. Candela, R. Mujal, R. Teodorescu, F. Blaabjerg, Multi-resonant frequency-locked loop for grid synchronization of power converters under distorted grid conditions. IEEE Trans. Ind. Electron. 58(1), 127–138 (2011)CrossRefGoogle Scholar
  23. 23.
    A. Bhattacharya, C. Chakraborty, S. Bhattacharya, Shunt Compensation. IEEE Ind. Electron. Mag. 3(3), 38–49 (2009)CrossRefGoogle Scholar

Copyright information

© The Institution of Engineers (India) 2019

Authors and Affiliations

  1. 1.Centre for Energy StudiesIIT DelhiNew DelhiIndia
  2. 2.Department of Electrical EngineeringIIT DelhiNew DelhiIndia

Personalised recommendations