A Shell of Wireless Sensor Network Node for High-Temperature and High-Humidity Environment: Modeling, Simulation, and Experimental Analysis
- 43 Downloads
With more and more applications of wireless sensor network technology in intelligent management of greenhouse, high-temperature and high-humidity resistance of wireless sensor nodes are becoming more and more important. This paper takes the wireless sensor nodes of the greenhouse as the research object. Aiming at the characteristics of high-temperature and high-humidity environment in summer, solid–liquid phase change material (stearic acid/lauric acid/graphite powder = 0.18:0.67:0.15) is selected as the cooling solution, the mixed desiccant of silica gel and clay is the dehumidification solution, and the high-temperature and high-humidity resistant shell of wireless sensor node is designed; the COMSOL software is used to simulate the high-temperature and high-humidity performance of the wireless sensor nodes. The results show that the maximum temperature of the node with the shell is kept below 45 °C and the relative humidity is kept within 60.9%; the experimental results of high-temperature and high-humidity environment show that the designed greenhouse wireless sensor nodes have obvious high-temperature and high-humidity resistance and can meet the requirements of wireless sensor nodes working in high-temperature and high-humidity environment of the greenhouse in summer.
KeywordsWireless sensor Greenhouse COMSOL High-temperature and high-humidity resistance
This work was funded by the Natural Science Foundation of Henan Province of China (Grant No. 162300410054) and the Fundamental Research Funds for the Universities of Henan Province of China (Grant No. 2015RCJH13).
- 1.P.P. Li, J.Z. Wang, Research progress of intelligent management for greenhouse environment information. Trans. Chin. Soc. Agric. Mach. 45, 236–243 (2014)Google Scholar
- 2.J. Li, M.R. Guo, L.L. Gao, Application and innovation strategy of agricultural Internet of Things. Trans. Chin. Soc. Agric. Eng. 31, 200–209 (2015)Google Scholar
- 3.W.J. Ge, C.J. Zhao, State-of-the-art and developing strategies of agricultural internet of things. Trans. Chin. Soc. Agric. Mach. 45, 222–230 (2014)Google Scholar
- 4.Y. He, P.C. Nie, F. Liu, Advancement and trend of internet of things in agriculture and sensing instrument. Trans. Chin. Soc. Agric. Mach. 44, 216–226 (2013)Google Scholar
- 9.C. Zhao, H.W. Tan, H.F. Shi, Cooling performance of evaporative cooling pad-fan unit in greenhouse in hot and humid environment. Heat. Vent. Air Cond. 41, 108–112 (2011)Google Scholar
- 10.S.M. Zhao, T. Yaguchi, Q. Zhou, B.M. Li et al., Study on pad and fan cooling system in modern greenhouse. J. Agric. Mech. Res. 2017, 147–152 (2007)Google Scholar
- 11.W. Zhou, X.C. Wang, Simulation research on combination cooling measure of Venlo greenhouse in summer based on CFD. J. Agric. Mech. Res. 37, 20–24 (2015)Google Scholar
- 16.K. Xu, X.L. Zhang, P.P. Li et al., Development of portable wireless detector for multi-parameter of soilless cultivation substrates. Trans. Chin. Soc. Agric. Mach. 46, 302–309 (2015)Google Scholar