Advertisement

Preparation and characterization of polyvinylidene fluoride/1-butyl-3-methylimidazolium bromide-based ionogel membranes for desalination applications

  • T. Iqbal
  • R. Sahrash
  • A. Siddiqa
  • S. Afsheen
  • M. B. Tahir
  • M. I. Khan
  • K. N. Riaz
  • G. Nabi
  • M. Fahad
  • M. Sharif
  • M. AbrarEmail author
Original Paper
  • 23 Downloads

Abstract

Polyvinylidene fluoride and an ionic liquid, 1-butyl-3-methylimidazolium bromide-based ionogel membranes, were fabricated by phase inversion method. The concentration of ionic liquid was varied in these membranes ranging from 0 to 15 wt%. The membranes were characterized by X-ray diffraction analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The X-ray diffraction and Fourier transform infrared spectroscopy results confirmed the conversion of alpha phase of pure polyvinylidene fluoride into beta phase with the addition of ionic liquid. The thermogravimetric results exhibited an increase in thermal stability, whereas scanning electron microscopy analysis displayed an increase in porosity of the ionogel membranes with the increase in concentration of ionic liquid. These fabricated membranes were applied for desalination such as the removal of copper nitrate trihydrate and cobalt nitrate hexahydrate from water. Different membrane properties including porosity, water content, solvent content, shrinkage ratio, pure water flux, salt rejection and fouling recovery ratio were also studied for the determination of applicability of these membranes in desalination. The porosity, water content, pure water flux and fouling recovery ratio manifested an increasing trend. The solvent content decreased as we moved from less hydrophobic solvents toward more hydrophobic solvents. Shrinkage ratio also decreased with the subsequent addition of ionic liquid. All these results evidenced the efficiency of these membranes in desalination and are mainly attributed to an increase in hydrophilicity and porosity of membranes.

Keywords

Ionic liquid Ionogels Polymer Polyvinylidene fluoride 

Notes

Acknowledgments

The authors wish to thank all who assisted in conducting this work.

References

  1. Abrar M et al (2013) Enhancement of the electrical properties of carbon nanotubes with Ar–N2 plasma treatment. Curr Appl Phys 13(3):567–575CrossRefGoogle Scholar
  2. Armand M et al (2011) Ionic-liquid materials for the electrochemical challenges of the future. Materials for sustainable energy: a collection of peer-reviewed research and review articles from Nature Publishing Group. World Scientific, Singapore, pp 129–137Google Scholar
  3. Baba Y et al (2011) Selective recovery of dysprosium and neodymium ions by a supported liquid membrane based on ionic liquids. Solvent Extr Res Dev Jpn 18:193–198CrossRefGoogle Scholar
  4. Begum S et al (2016) Potential of polyvinylidene fluoride/carbon nanotube composite in energy, electronics, and membrane technology: an overview. Polym Plast Technol Eng 55(18):1949–1970CrossRefGoogle Scholar
  5. Du CH et al (2011a) Structure design and properties of porous PVDF membranes based on ionic liquid. In: Advanced materials research, vol 311–313. Trans Tech Publication, pp 1102–1105Google Scholar
  6. Du CH et al (2011b) Structure design and properties of porous PVDF membranes based on ionic liquid. Adv Mater Res 311–313:1102–1105CrossRefGoogle Scholar
  7. Fan L-L, Li H-J, Chen Q-H (2014) Applications and mechanisms of ionic liquids in whole-cell biotransformation. Int J Mol Sci 15(7):12196–12216CrossRefGoogle Scholar
  8. Freire MG et al (2012) Insight into the interactions that control the phase behaviour of new aqueous biphasic systems composed of polyethylene glycol polymers and ionic liquids. Chemistry 18(6):1831–1839CrossRefGoogle Scholar
  9. Ghandi K (2014) A review of ionic liquids, their limits and applications. Green Sustain Chem 04(01):44–53CrossRefGoogle Scholar
  10. Guichard E et al (2016) Flavour: from food to perception. Wiley, New YorkCrossRefGoogle Scholar
  11. Guo L et al (2011) Preparation of PVDF-based polymer inclusion membrane using ionic liquid plasticizer and Cyphos IL 104 carrier for Cr(VI) transport. J Membr Sci 372(1):314–321CrossRefGoogle Scholar
  12. Hayes R, Warr GG, Atkin R (2015) Structure and nanostructure in ionic liquids. Chem Rev 115(13):6357–6426CrossRefGoogle Scholar
  13. Hui YH (2006) Handbook of food science, technology, and engineering, vol 149. CRC Press, Boca RatonGoogle Scholar
  14. Kang G, Cao Y (2014) Application and modification of poly (vinylidene fluoride) (PVDF) membranes: a review. J Membr Sci 463:145–165CrossRefGoogle Scholar
  15. Mannheim C (2008) Innovations in food packaging, edited by Jung H. Han. Elsevier Academic Press, Amsterdam. ISBN: 9780080455174Google Scholar
  16. Martinelli A (2014) Effects of a protic ionic liquid on the reaction pathway during non-aqueous sol–gel synthesis of silica: a Raman spectroscopic investigation. Int J Mol Sci 15(4):6488–6503CrossRefGoogle Scholar
  17. Martins P, Lopes AC, Lanceros-Mendez S (2014) Electroactive phases of poly(vinylidene fluoride): determination, processing and applications. Prog Polym Sci 39(4):683–706CrossRefGoogle Scholar
  18. Marzec A (2014) The effect of dyes, pigments and ionic liquids on the properties of elastomer composites. Université Claude Bernard-Lyon I, VilleurbanneGoogle Scholar
  19. Matsumoto M et al (2011) Effect of ammonium- and phosphonium-based ionic liquids on the separation of lactic acid by supported ionic liquid membranes (SILMs). Membranes 1(2):98–108CrossRefGoogle Scholar
  20. Moscoso F et al (2013) Pesticide removal from aqueous solutions by adding salting out agents. Int J Mol Sci 14(10):20954–20965CrossRefGoogle Scholar
  21. Noorashikin MS et al (2013) Cloud point extraction of parabens using non-ionic surfactant with cylodextrin functionalized ionic liquid as a modifier. Int J Mol Sci 14(12):24531–24548CrossRefGoogle Scholar
  22. Nor NAM et al (2017) Effects of heat treatment of TiO2 nanofibers on the morphological structure of PVDF nanocomposite membrane under UV irradiation. J Water Process Eng 20:193–200CrossRefGoogle Scholar
  23. Otitoju TA, Ahmad AL, Ooi BS (2016) Polyvinylidene fluoride (PVDF) membrane for oil rejection from oily wastewater: a performance review. J Water Process Eng 14:41–59CrossRefGoogle Scholar
  24. Park J et al (2014) Application of ionic liquids in hydrometallurgy. Int J Mol Sci 15(9):15320–15343CrossRefGoogle Scholar
  25. Rivera-Rubero S, Baldelli S (2004) Influence of water on the surface of hydrophilic and hydrophobic room-temperature ionic liquids. J Am Chem Soc 126(38):11788–11789CrossRefGoogle Scholar
  26. Rodríguez de San Miguel E, Aguilar JC, de Gyves J (2008) Structural effects on metal ion migration across polymer inclusion membranes: dependence of transport profiles on nature of active plasticizer. J Membr Sci 307(1):105–116CrossRefGoogle Scholar
  27. Silvester DS (2011) Recent advances in the use of ionic liquids for electrochemical sensing. Analyst 136(23):4871–4882CrossRefGoogle Scholar
  28. Singh G, Kumar A (2008) Ionic liquids: physico-chemical, solvent properties and their applications in chemical processes. Indian J Chem Sect A 47(4):495Google Scholar
  29. Vander Hoogerstraete T, Onghena B, Binnemans K (2013) Homogeneous liquid–liquid extraction of rare earths with the betaine-betainium bis(trifluoromethylsulfonyl)imide ionic liquid system. Int J Mol Sci 14(11):21353–21377CrossRefGoogle Scholar
  30. Wang J et al (2016) Recent development of ionic liquid membranes. Green Energy Environ 1(1):43–61CrossRefGoogle Scholar
  31. Yongquan D et al (2012) Preparation, characterization of P (VDF-HFP)/[bmim] BF 4 ionic liquids hybrid membranes and their pervaporation performance for ethyl acetate recovery from water. Desalination 295:53–60CrossRefGoogle Scholar

Copyright information

© Islamic Azad University (IAU) 2019

Authors and Affiliations

  1. 1.Department of Physics, Faculty of ScienceUniversity of GujratGujratPakistan
  2. 2.Nanoscience and Technology DepartmentNational Centre for PhysicsIslamabadPakistan
  3. 3.Department of Zoology, Faculty of ScienceUniversity of GujratGujratPakistan
  4. 4.Department of Electrical EngineeringCOMSATS University IslamabadAbbottabadPakistan
  5. 5.Department of PhysicsGovernment College University FaisalabadFaisalabadPakistan
  6. 6.Department of PhysicsHazara UniversityMansehraPakistan

Personalised recommendations