Advertisement

Rapid and greener method for utilization of Plaster of Paris (POP) waste generated from biomedical samples

  • G. R. Navale
  • K. N. Gohil
  • K. R. Puppala
  • S. S. Shinde
  • S. Umbarkar
  • M. S. DharneEmail author
Short Communication

Abstract

Plaster of Paris (POP) is one of the recalcitrant wastes generated from dentistry and orthopaedic materials used in healthcare sector. The current practice of disposal of POP waste-harbouring biomedical material by incineration is very critical and environmentally unfriendly. The eco-friendly and rapid disintegration of such biomedical-related POP waste was done by treating with ammonium bicarbonate solution (20% w/v ABC) to form non-hazardous products like ammonium sulphate and calcium carbonate in the form of sludge. The ammonium sulphate (NH4)2SO4 is generally used in agriculture as a chemical fertilizer and calcium carbonate (CaCO3) as an additive in construction sector making this process cost-effective and value addition. Interestingly, 20% ABC solution also had significant antibiofilm, antimicrobial activity against fungi, yeast and bacterial strains probably due to its high pH-driven osmotic effect. Therefore, 20% ABC solution finds dual eco-friendly application in disinfection of used POP, especially arising from biomedical waste from patients.

Keywords

Plaster of Paris waste Biomedical waste Eco-friendly disintegration 

Notes

Acknowledgements

Authors would like to acknowledge Council of Scientific and Industrial Research (CSIR), India, for financial support and are also grateful to director, CSIR-National Chemical, India, for his constant support and encouragement. GN and KP acknowledge CSIR for fellowship. KG acknowledges University Grants Commission (UGC), New Delhi, for fellowship. This work has been carried out under Societal Programme (CSIR-800) aiming to provide affordable solutions to around 800 million populations in India.

References

  1. Atar N, Eren T, Yola ML, Wang S (2015) A sensitive molecular imprinted surface plasmon resonance nanosensor for selective determination of trace triclosan in wastewater. Sens Actuators B Chem 216:638–644CrossRefGoogle Scholar
  2. Atar N, Yola ML, Eren T (2016) Sensitive determination of citrinin based on molecular imprinted electrochemical sensor. Appl Surf Sci 362:315–322CrossRefGoogle Scholar
  3. Chandara C, Azizli KAM, Ahmad ZA, Sakai E (2009) Use of waste gypsum to replace natural gypsum as set retarders in portland cement. Waste Manag 29:1675–1679.  https://doi.org/10.1016/j.wasman.2008.11.014 CrossRefGoogle Scholar
  4. Chartier Y, Emmanuel J, Pieper U et al (2014) Safe management of wastes from health-care activities, vol 2. World Health Organization, GenevaGoogle Scholar
  5. Craswell ET, De Datta SK, Obcemea WN, Hartantyo M (1981) Time and mode of nitrogen fertilizer application to tropical wetland rice. Fertil Res 2:247–259.  https://doi.org/10.1007/BF01050197 CrossRefGoogle Scholar
  6. Declet A (2016) Calcium carbonate precipitation: a review of the carbonate crystallization process and applications in bioinspired composites. Rev Adv Mater Sci 44:87–107Google Scholar
  7. Ertan B, Eren T, Ermiş İ et al (2016) Sensitive analysis of simazine based on platinum nanoparticles on polyoxometalate/multi-walled carbon nanotubes. J Colloid Interface Sci 470:14–21CrossRefGoogle Scholar
  8. Ferdowsi A, Ferdosi M, Mehrani MJ (2013) Incineration or autoclave? A comparative study in Isfahan hospitals waste management system. Mater Sociomed 25:48–51.  https://doi.org/10.5455/msm.2013.25.48-51 CrossRefGoogle Scholar
  9. Gupta VK, Yola ML, Eren T, Atar N (2015) Selective QCM sensor based on atrazine imprinted polymer: its application to wastewater sample. Sens Actuators B Chem 218:215–221CrossRefGoogle Scholar
  10. IPEN study (2014) Bio-medical waste management: situational analysis & predictors of performances in 25 districts across 20 Indian States. Indian J Med Res 139:141–153Google Scholar
  11. Jikan SS, Arshat IM, Badarulzaman NA (2013) Melt flow and mechanical properties of polypropylene/recycled plaster of paris. Appl Mech Mater 315:905–908.  https://doi.org/10.4028/www.scientific.net/AMM.315.905 CrossRefGoogle Scholar
  12. Kanthe VN (2013) Use of waste plaster of paris in concrete. Int J Innov Res Dev 2:855–862Google Scholar
  13. Krishnappa P, Sreekantaiah P, Hiremath SS et al (2015) Quantification of dental health care waste generated among private dental practices in Bengaluru city. J Int Oral Health JIOH 7:84–87Google Scholar
  14. Liu F, Wang S, Zhang X et al (2009) Study on ammonium bicarbonate decomposition after CO2 sequestration by ammonia method. Huanjing Kexue Xuebao/Acta Sci Circumst 29:1886–1890Google Scholar
  15. Manyele SV (2014) Effects of improper hospital-waste management on occupational health and safety. Afr Newslett Occup Health Saf 14:30–33Google Scholar
  16. Mastorakis NE, Bulucea CA, Oprea TA et al (2011) Holistic approach of biomedical waste management system with regard to health and environmental risks. Int J Energy Environ 5:309–318Google Scholar
  17. Navale GR, Dharne MS, Shinde SS (2015a) Antibiofilm activity of tert-BuOH functionalized ionic liquids with methylsulfonate counteranions. RSC Adv 5:68136–68142.  https://doi.org/10.1039/c5ra12854d CrossRefGoogle Scholar
  18. Navale GR, Rout CS, Gohil KN et al (2015b) Oxidative and membrane stress-mediated antibacterial activity of WS2 and rGO2 nanosheets. RSC Adv 5:74726–74733.  https://doi.org/10.1039/c5ra15652a CrossRefGoogle Scholar
  19. Navale GR, Thripuranthaka M, Late DJ (2015c) Antimicrobial activity of ZnO nanoparticles against pathogenic bacteria and fungi. JSM Nanotechnol Nanomed 3(1):1033Google Scholar
  20. Ngamsurat S, Boonkerd K, Leela-Adisorn U, Potiyaraj P (2011) Curing characteristics of natural rubber filled with gypsum. Energy Procedia 9:452–458.  https://doi.org/10.1016/j.egypro.2011.09.051 CrossRefGoogle Scholar
  21. Payne A, Slover J, Inneh I et al (2015) Orthopedic implant waste: analysis and quantification. Am J Orthop (Belle Mead NJ) 44:554–560Google Scholar
  22. Ram A, Sen S (1959) Plaster of paris. Trans Indian Ceram Soc 18:35–54.  https://doi.org/10.1080/0371750X.1959.11011909 CrossRefGoogle Scholar
  23. Ramesh Babu B, Parande AK, Rajalakshmi R et al (2009) Management of biomedical waste in India and other countries: a review. J Int Environ Appl Sci 4:65–78Google Scholar
  24. Schmidt VE, Somerset JH, Porter RE (2018) Mechanical properties of orthopedic plaster bandages. J Biomech 6:177–185.  https://doi.org/10.1016/0021-9290(73)90086-9 Google Scholar
  25. Shukla NP, Bundela PS, Khare SK, Sarsaiya S (2014) Study of the impact of plaster of paris (Pop) and clay idols immersion in water. Int J Sci Eng Technol 864:861–864Google Scholar
  26. Vekinis G, Ashby MF, Beaumont PWR (1993) Plaster of paris as a model material for brittle porous solids. J Mater Sci 28:3221–3227.  https://doi.org/10.1007/BF00354239 CrossRefGoogle Scholar
  27. Yola ML, Atar N (2017) Electrochemical detection of atrazine by platinum nanoparticles/carbon nitride nanotubes with molecularly imprinted polymer. Ind Eng Chem Res 56:7631–7639.  https://doi.org/10.1021/acs.iecr.7b01379 CrossRefGoogle Scholar
  28. Yola ML, Eren T, Atar N (2014) A novel efficient photocatalyst based on TiO2 nanoparticles involved boron enrichment waste for photocatalytic degradation of atrazine. Chem Eng J 250:288–294.  https://doi.org/10.1016/j.cej.2014.03.116 CrossRefGoogle Scholar
  29. Yola ML, Gupta VK, Atar N (2016) New molecular imprinted voltammetric sensor for determination of ochratoxin A. Mater Sci Eng, C 61:368–375CrossRefGoogle Scholar
  30. Yu Z, Juhasz A, Islam S et al (2018) Impact of mid-season sulphur deficiency on wheat nitrogen metabolism and biosynthesis of grain protein. Sci Rep 8:2499.  https://doi.org/10.1038/s41598-018-20935-8 CrossRefGoogle Scholar

Copyright information

© Islamic Azad University (IAU) 2018

Authors and Affiliations

  1. 1.NCIM Resource CentreCSIR-National Chemical LaboratoryPuneIndia
  2. 2.Division of Organic ChemistryCSIR-National Chemical LaboratoryPuneIndia
  3. 3.Department Industrial and Chemical EngineeringInstitute of Chemical Technology Mumbai Marathwada CampusJalnaIndia
  4. 4.Division of CatalysisCSIR-National Chemical LaboratoryPuneIndia

Personalised recommendations