Skip to main content

Advertisement

Log in

A cheap and third-age-friendly home device for monitoring indoor air quality

  • Original Paper
  • Published:
International Journal of Environmental Science and Technology Aims and scope Submit manuscript

Abstract

Nowadays, thanks to the hardware costs reduction everyone at home owns at least one hi-technology devices to support life quality. This paper proposes a new methodology to analyse the indoor air quality with a cheap and third-age-dedicated device. A new prototype, called Home Pollution Embedded System (HOPES), was developed to give simple and understandable information, also comprehensible for people with cognitive problems or that are not familiar with new technologies. The device gathers pollutants data and displays to the user different air pollutants concentrations, from toxics gasses up to explosives. Moreover, an overall air quality index has been elaborated and is displayed by HOPES with lights and numerical information. HOPES is an Internet of things device that works in real time and that can be connected to the web and to a geographic information system platform to add spatial information of each pollutant. The hardware architecture employs a set of gas semiconductor sensors and an IR particulate matter sensor. Experimental results demonstrated that HOPES has an accurate sensor response and is suitable to be used with the proposed indices. In fact, despite of the poor-selective metal oxide sensors, the results highlighted how it is possible to get useful air quality information with a cheap device. However, the system needs more tests to validate the sensors array with different substances.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  • ACGIH (2003) Threshold limit values for chemical substances and physical agents and biological exposure indices, TLVs and BEIs. American Conference of Governmental Industrial Hygienists, Cincinnati, p 25

    Google Scholar 

  • Ahmadi A, Abbaspour M, Arjmandi R, Abedi Z (2015) Air quality risk index (AQRI) and its application for a megacity. Int J Environ Sci Technol 12:3773–3780

    Article  Google Scholar 

  • Alesheikh AA, Oskouei AK, Atabi F, Helali H (2005) Providing interoperability for air quality in situ sensors observations using GML technology. Int J Environ Sci Technol 2:133–140

    Article  CAS  Google Scholar 

  • Almeida-Silva M, Wolterbeek HT, Almeida SM (2014) Elderly exposure to indoor air pollutants. Atmos Environ 85:54–63

    Article  CAS  Google Scholar 

  • Astiaso Garcia D, Cinquepalmi F, Cumo F (2013) Air quality in Italian small harbours: a proposed assessment methodology. Rend Lincei 24:309–318

    Article  Google Scholar 

  • Bitter F, Muller B, Muller D (2010) Estimation of odour intensity of indoor air pollutants from building materials with a multi-gas sensor system. Build Environ 45:197–204

    Article  Google Scholar 

  • Choi S, Kim N, Cha H, Ha R (2009) Micro sensor node for air pollutant monitoring: hardware and software issues. Sensors 9(10):7970–7987

    Article  CAS  Google Scholar 

  • Devarakonda S, Sevusu P, Liu H, Liu R, Iftode L, Nath B (2013) Real-time air quality monitoring through mobile sensing in Metropolitan areas. In: Proceedings of the 2nd ACM SIGKDD international workshop on urban computing (UrbComp’13)

  • European Commission, Air Quality Standards, http://ec.europa.eu/environment/air/quality/standards.htm. Accessed 09 Apr 16

  • Fromme H, Twardella D, Dietrich S, Heitmann D, Schierl R, Liebl B, Rüden H (2007) Particulate matter in the indoor air of classrooms-exploratory results from Munich and surrounding area. Atmos Environ 41:854–866

    Article  CAS  Google Scholar 

  • Gao M, Cao J, Seto E (2015) A distributed network of low-cost continuous reading sensors to measure spatiotemporal variations of PM2.5 in Xi’an, China. Environ Pollut 199:56–65

    Article  CAS  Google Scholar 

  • Gugliermetti L, Mattoni B, Nardecchia F, Bisegna F, Galati C (2015) Home smart grid device for energy saves and failure monitoring. In: IEEE 15th international conference on environment and electrical engineering, EEEIC 2015 - conference proceedings. pp 671–676

  • Han Y, Qi M, Chen Y, Shen H, Liu J, Huang Y, Chen H, Liu W, Wang X, Liu J, Xing B, Tao S (2015) Influences of ambient air PM2.5 concentration and meteorological condition on the indoor PM2.5 concentrations in a residential apartment in Beijing using a new approach. Environ Pollut 205:307–314

    Article  CAS  Google Scholar 

  • Hebbar S, Kiran KV, Kumar GKA, Kumari ASA, Yasasvi R, Gupta AK, Mishra V, Amrutur B, Bhat N (2014) System engineering and deployment of envirobat: an urban air pollution monitoring device. In: IEEE international conference on electronics, computing and communication technologies. pp 1–6

  • Herberger S, Ulmer H (2012) Indoor air quality monitoring improving air quality perception. CLEAN Soil Air Water 40(6):578–585

    Article  CAS  Google Scholar 

  • Jelicic V, Magno M, Paci G, Brunelli D, Benini L (2011) Design, characterization and management of a wireless sensor network for smart gas monitoring. In: Proceedings of the 4th IEEE international workshop on advances in sensors and interfaces (IWASI’11). pp 115–120

  • Jovasevic-Stojanovic M, Bartonova A, Topalovic D, Lazovic I, Pokric B, Ristovski Z (2015) On the use of small and cheaper sensors and devices for indicative citizen-based monitoring of respirable particulate matter. Environ Pollut 206:696–704

    Article  CAS  Google Scholar 

  • Khedo KK, Perseedoss R, Mungur A (2010) A wireless sensor network air pollution monitoring system. Int J Wirel Mobile Netw 2(2):31–45

    Article  Google Scholar 

  • Kim S, Paulos E (2010) inAir: sharing indoor air quality measurements and visualizations. Conf Hum Factors Comput Syst Proc 3:1861–1870

    Google Scholar 

  • Mandayo GG, Herrán J, Castro-Hurtado I, Castano E (2011) Performance of a CO2 impedimetric sensor prototype for air quality monitoring. Sensors 11:5047–5057

    Article  CAS  Google Scholar 

  • Manes G, Collodi G, Fusco R, Gelpi L, Manes A (2012) A wireless sensor network for precise volatile organic compound monitoring. Int J Distrib Sens Netw 8(4):820716. doi:10.1155/2012/820716

    Article  Google Scholar 

  • NIOSH (2007) Department of Health and Human Services - National Institute for Occupational Safety and Health. Niosh pocket guide to chemical hazards. http://www.cdc.gov/niosh/docs/2005-149/pdfs/2005-149.pdf. Accessed 09 Apr 16

  • Noh SK, Kim KS, Ji YK (2013) Design of a room monitoring system for wireless sensor networks. Int J Distrib Sens Netw 2013:1–7

    Google Scholar 

  • Peng X, Zhang L, Tian F, Zhang D (2015) A novel sensor feature extraction based on kernel entropy component analysis for discrimination of indoor air contaminants. Sens Actuators A 234:143–149

    Article  CAS  Google Scholar 

  • Stellman JM (2012) Encyclopaedia of occupational health and safety: guides, indexes, directory, 4th edn. International Labor Office, Geneve

    Google Scholar 

  • Tien SC, Lin R, Lee TY, Lee RG, Huang SY (2014) Development and implementation of wireless multigas concentration cloud system. Hindawi Publishing Corporation, ISRN Sensor Networks Volume, London, UK

  • Tsow F, Forzani E, Rai A, Wang R, Tsui R, Mastroianni S, Knobbe C, Gandolfi AJ, Tao NJ (2009) A wearable and wireless sensor system for real-time monitoring of toxic environmental volatile organic compounds. IEEE Sens J 9(12):1734–1740

    Article  CAS  Google Scholar 

  • Tzeng CB, Wey T (2011) Design and implement a cost effective and ubiquitous air quality monitoring system based on ZigBee wireless sensor network. In: Proceedings of the 2nd international conference on innovations in bio-inspired computing and applications (IBICA’11). pp 245–248

  • Yao DJ (2009) A gas sensing system for indoor air quality control and polluted environmental monitoring. In: 9th IEEE Conference on Nanotechnology, IEEE NANO. pp 806–811

  • Yaws C, Braker W, Matheson Mossman AL (2001) Gas data book, 7th edn. McGraw-Hill, New York

    Google Scholar 

  • Zhang L, Tian F, Nie H, Dang L, Li G, Ye Q, Kadri C (2012) Classification of multiple indoor air contaminants by an electronic nose and a hybrid support vector machine. Sens Actuators B Chem 174:114–125

    Article  CAS  Google Scholar 

Download references

Acknowledgements

Thanks to Dynamic Makers Team for their support and help in developing the web platform and the experimental test section. Other thanks go to the CNR for their disposability and help to make the tests. This research was carried out within the significant bilateral project PRACTICE (Planning Rethinked Ageing Cities Through Innovative Cellular Environments), financed by the Italian Ministry for Education, Universities and Research (MIUR) under the Executive Programme on Scientific and Technological Cooperation between Italian Republic and the Kingdom of Sweden for the years 2014–2016.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to D. Astiaso Garcia.

Additional information

Editorial responsibility: M. Abbaspour.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gugliermetti, L., Astiaso Garcia, D. A cheap and third-age-friendly home device for monitoring indoor air quality. Int. J. Environ. Sci. Technol. 15, 185–198 (2018). https://doi.org/10.1007/s13762-017-1382-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13762-017-1382-3

Keywords

Navigation