Advertisement

Utilization of palm oil mill effluent for polyhydroxyalkanoate production and nutrient removal using statistical design

  • M. F. Md. Din
  • M. PonrajEmail author
  • M. Van Loosdrecht
  • Z. Ujang
  • S. Chelliapan
  • V. Zambare
Original Paper

Abstract

The optimization for poly-β-hydroxyalkanoate production was carried out with nutrient removal efficiency for total organic carbon (TOC), phosphate, and nitrate from palm oil mill effluent waste. The experiment was conducted in a fabricated fed-batch reactor and the data obtained was analyzed using central composite rotatable design and factorial design for response surface methodology as a systematic approach for designing the experiment statistically to obtain valid results with minimum effort, time, and resources. The analysis of numerical optimization with propagation of error showed that 66 % of poly-β-hydroxyalkanoate production can be obtained with nutrient removal of TOC and nitrate by 19 and 3 %, respectively. However, phosphate removal efficiency was not found to be much effective. More over, the chemical oxygen demand: nitrogen phosphate (509 g/g N), chemical oxygen demand: phosphate (200 g/g P), air flow rate (0.59 L/min), substrate feeding rate (20 mL/min), and cycle length (20 h) were the optimized variables for maximum poly-β-hydroxyalkanoate production and nutrient removal.

Keywords

Biopolymer Nitrate removal Palm oil mill effluent Phosphate removal Statistical design 

Notes

Acknowledgments

The authors are pleased to acknowledge the Ministry of Science and Innovation (MOSTI) for providing the research grant (IRPA, vot 74262) and National Foundation for Tropical Country (WOTRO) of the Netherlands for financial support. We are also grateful to Universiti Teknologi Malaysia (UTM) and Technical University of Delft for their facilities and training opportunities.

References

  1. Ahn WS, Park SJ, Lee SY (2000) Production of poly(3-hydroxybutyrate) by fed-batch culture of recombinant Escherichia Coli with a highly concentrated whey solution. Appl Environ Microbiol 66:3624–3627CrossRefGoogle Scholar
  2. Anderson AJ, Haywood GW, Williams DR, Dawes EA (1990) The production of polyhydroxyalkanoates from unrelated carbon sources. In: Dawes EA (ed) Novel biodegradable microbial polymers. Kluwer Academic Publishers, Netherlands, pp 119–129CrossRefGoogle Scholar
  3. Bocchini DA, Alves-Prado HF, Baida LC, Roberto IC, Gomes E, Da Silva R (2002) Optimization of xylanase production by Bacillus circulans D1 in submerged fermentation using response surface methodology. Process Biochem 38:727–731CrossRefGoogle Scholar
  4. Clesceri LS, Eaton AD, Greenberg AE, Franson MAH, APHA, AWWA, WEF (1995) Standard methods of the examination of water and wastewater, 19th edn. American Public Health Association, WashingtonGoogle Scholar
  5. Dey G, Mitra A, Banerjee R, Maiti BR (2001) Enhanced production of amylase by optimization of nutritional constituents using response surface methodology. Biochem Eng J 7:227–231CrossRefGoogle Scholar
  6. Fuchtenbusch B, Wullbrandt D, Steinbuchel A (2000) Production of polyhydroxyalkanoic acids by Ralstonia eutropha and Pseudomonas oleovorans from oil remaining from biotechnological rhamnose production. Appl Microbiol Biotechnol 53:167–172CrossRefGoogle Scholar
  7. Hassan MA, Nawata O, Shirai Y, Nor Aini AR, Yee PL, Arif A, Abdul Karim MI (2002) A proposal for zero emission from palm oil industry incorporating the production of polyhydroxyalkanoates from palm oil mill effluent. J Chem Eng 35:9–14CrossRefGoogle Scholar
  8. Hong K, Leung YC, Kwok SY, Law KH, Lo WH, Chua H, Yu PHF (2000) Construction of recombinant Escherichia coli strains for polyhydroxybutyrate production using soy waste as nutrient. Appl Biochem Biotechnol 84–86:381–390CrossRefGoogle Scholar
  9. Kulpreecha S, Boonruangthavorn A, Meksiriporn B, Thongchul N (2009) Inexpensive fed-batch cultivation for high poly(3-hydroxybutyrate) production by a new isolate of Bacillus megaterium. J Biosci Bioeng 107:240–245CrossRefGoogle Scholar
  10. Kumar S, Katiyar N, Ingle P, Negi S (2011) Use of evolutionary operation (EVOP) factorial design technique to develop a bioprocess using grease waste as a substrate for lipase production. Bioresour Technol 102:4909–4912CrossRefGoogle Scholar
  11. Lam MK, Lee KT (2011) Renewable and sustainable bioenergies production from palm oil mill effluent (POME): win–win strategies toward better environmental protection. Biotechnol Adv 29:124–141CrossRefGoogle Scholar
  12. Lee SL, Chen WC (1997) Optimization of medium composition for the production of glucosyltransferase by Aspergillus niger with response surface methodology. Enzyme Microb Technolnol 21:436–440CrossRefGoogle Scholar
  13. Malaysia Palm Oil Board (2005) Palm oil update-for the latest information on palm oil. 25(09/05). Ministry of Plantation Industries and Commodities, MalaysiaGoogle Scholar
  14. Marchessaul RH (2009) Polyhydroxyalkanoate (PHA) history at Syracuse University and beyond. Cellulose 16:357–359CrossRefGoogle Scholar
  15. Md Din MF, Yunus S, Ujang Z, Salim MR, Loosdrecht MCM, Ahmad A, Marpongahtun M (2005) A complete analysis on PHA production and their rates using sunflower oil and mixed cultures: hydraulic retention times (HRT) effects. J Sains Kimia 9: 31–41Google Scholar
  16. Montgomery DC, Peck EA (1982) Introduction to Linear regression analysis. John Wiley & Sons, New yorkGoogle Scholar
  17. Mumtaz T, Yahaya NA, Aziz SA, Rahman NAA, Yee PL, Shirai Y, Hassan MA (2010) Turning waste to wealth-biodegradable plastics polyhydroxyalkanoates from palm oil mill effluent—a Malaysian perspective. J Cleaner Product 18:1393–1402CrossRefGoogle Scholar
  18. Myers RH, Montgomery DC (2002) Response surface methodology: process and product optimization using designed experiments, 2nd edn. John Wiley and Sons, New YorkGoogle Scholar
  19. Otari SV, Ghosh JS (2009) Production and Characterization of the polymer polyhydroxy butyrate-copolyhydroxy valerate by Bacillus Megaterium NCIM 2475. Curr Res J Biol Sci 1:23–26Google Scholar
  20. Reddy CSK, Ghai R, Rashmi T, Kalia VC (2003) Polyhydroxyalkanoates: an overview. Bioresour Technol 87: 137–146Google Scholar
  21. Rodríguez-Carmona E, Bastida J, Manresa A (2011) Utilization of agro-industrial residues for poly(3-hydroxyalkanoate) production by Pseudomonas aeruginosa 42A2 (NCIMB 40045): optimization of culture medium. J Am Oil Chem Soc 89:111–122CrossRefGoogle Scholar
  22. Salehizadeh H, Van Loosdrecht MCM (2004) Production of polyhydroxyalkanoates by mixed culture: recent trends and biotechnical importance. Biotechnol Adv 22:261–279CrossRefGoogle Scholar
  23. Salmiati Z, Ujang MR, Salim MF, Md Din MF, Ahmad MA (2007) Intracellular biopolymer productions using mixed microbial cultures from fermented POME. Water Sci Technol 56:179–185CrossRefGoogle Scholar
  24. Serafim LS, Lemos PC, Oliveira R, Reis MAM (2004) The optimization of polyhydroxybutyrate production by mixed cultures submitted to aerobic dynamic feeding conditions. Biotechnol Bioeng 87:145–160CrossRefGoogle Scholar
  25. Sreekumar O, Chand N, Basappa AC (1999) Optimization and interaction of media components in ethanol production using Zymomonas mobilis by response surface methodology. J Biosci Bioeng 83:334–338CrossRefGoogle Scholar
  26. Tokiwa Y, Calabia BP (2004) Degradation of microbial polyesters. Biotechnol Lett 26:1181–1189CrossRefGoogle Scholar
  27. Vijayendra SVN, Rastogi NK, Shamala TR, Anil Kumar PK, Kshama L, Joshi GJ (2007) Optimization of polyhydroxybutyrate production by Bacillus sp. CFR 256 with corn steep liquor as a nitrogen source. Indian J Microbiol 47:170–175CrossRefGoogle Scholar
  28. Watier D, Dubourguier HC, Leguerinel I, Hornez JP (1996) Response surface models to describe the effects of temperature, ph, and ethanol concentration on growth kinetics and end products of a Pectinatus sp. Appl Environ Microbiol 62:1233–1237Google Scholar
  29. Wong AL, Chua H, Lo WH, Yu PHF (2000) Synthesis of bioplastics from food industry wastes with activated sludge biomass. Water Sci Technol 41:55–59Google Scholar
  30. Yu PH, Chua H, Huang AL, Lo W, Chen GQ (1998) Conversion of food industrial wastes into bioplastics. Appl Biochem Biotechnol 70:603–614CrossRefGoogle Scholar

Copyright information

© Islamic Azad University (IAU) 2013

Authors and Affiliations

  • M. F. Md. Din
    • 1
  • M. Ponraj
    • 1
    Email author
  • M. Van Loosdrecht
    • 3
  • Z. Ujang
    • 2
  • S. Chelliapan
    • 1
  • V. Zambare
    • 4
  1. 1.Faculty of Civil EngineeringInstitute of Environmental and Water Resource Management (IPASA), Water Research Alliance, Universiti Teknologi MalaysiaSkudaiMalaysia
  2. 2.Faculty of Natural and Chemical EngineeringUniversiti Teknologi MalaysiaSkudaiMalaysia
  3. 3.Kluyver Laboratory for Biotechnology, Department of Biochemical EngineeringDelft University of TechnologyDelftThe Netherlands
  4. 4.Sequence Biotech Pvt. Ltd.Dist-NashikIndia

Personalised recommendations