Advertisement

Electrospun polyvinylidene fluoride/polyacrylonitrile composite fibers: fabrication and characterization

  • Guizhen KeEmail author
  • Xinya Jin
  • Haoxuan Hu
Original Research
  • 6 Downloads

Abstract

The purpose of this study is to make use of the advantages of both polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN) to fabricate a flexible electronic device. Polyvinylidene fluoride (PVDF)/polyacrylonitrile (PAN) composite fibrous mats with different blend ratios were fabricated using electrospinning. The effects of PVDF and PAN mass ratio on fiber morphology, chemical structure, thermal stability, and piezoelectric properties of the produced composite fibers were investigated by scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and piezoelectric tester. The SEM images showed that the PVDF/PAN composite nanofibers were fabricated successfully and fiber diameters increased with the increase of PVDF content. The FTIR and XRD analyses showed that both the α- and β-crystal phases existed in PVDF/PAN composite fibers. The thermal stability of PVDF/PAN fibrous mats was less than that of neat PVDF fibers. The piezoelectric properties of PVDF/PAN fibrous mats were significant and a function of PVDF content. The output voltage of PVDF/PAN fibrous mats increased from 1.2 to 5.0 V as PVDF content increased from 20 to 100%. The piezoelectric voltages of PVDF/PAN composite nanofibers also increased with the increase of impacting force. Tensile and contact angle testing indicated that the PVDF/PAN fibrous mats were more flexible and hydrophilic than neat PVDF membrane. PVDF/PAN nanocomposite fiber mats were observed suitable for potential application in flexible electronic devices.

Keywords

PVDF PAN Nanocomposites Electrospinning Piezoelectricity 

Notes

Acknowledgements

This work was financially supported by Hubei Natural Science Foundation and Fundamental Research Funds of Wuhan Textile Universities. Authors are thankful to Prof. Zikui Bai for providing piezoelectric characterization facility.

References

  1. 1.
    Ruan L, Yao X, Chang Y, Zhou L, Qin G, Zhang X (2018) Properties and applications of the β-phase poly(vinylidene fluoride). Polymers 10:1–27CrossRefGoogle Scholar
  2. 2.
    Gregorio R (2006) Determination of the α, β, and γ crystalline phases of poly(vinylidene fluoride) films prepared at different conditions. Proteomics 100:3272–3279Google Scholar
  3. 3.
    da Silva AB, Wisniewski C, Esteves JVA, Gregorio R (2010) Effect of drawing on the dielectric properties and polarization of pressed solution cast beta-PVDF films. J Mater Sci 45:4206–4215CrossRefGoogle Scholar
  4. 4.
    Du CH, Zhu BK, Xu YY (2007) Effects of stretching on crystalline phase structure and morphology of hard elastic PVDF fibers. J Appl Polym Sci 104:2254–2259CrossRefGoogle Scholar
  5. 5.
    He LH, Qun X, Hua CW, Song R (2010) Effect of multi-walled carbon nanotubes on crystallization, thermal, and mechanical properties of poly(vinylidene fluoride). Polym Compos 31:921–927Google Scholar
  6. 6.
    Sun J, Yao L, Zhao QL, Huang J, Song R, Ma Z, He LH, Huang W, Hao YM (2011) Modification on crystallization of poly(vinylidene fluoride) (PVDF) by solvent extraction of poly(methyl methacrylate) (PMMA) in PVDF/PMMA blends. Front Mater Sci 5:388–400CrossRefGoogle Scholar
  7. 7.
    Song R, Liu X, Wang HF, Xia GM, He LH, Wang Y, Huang W, Zhao QL (2014) Enhanced beta phase of polyvinylidene fluoride with addition of polyamide 6: role of interfacial interactions. Colloid Polym Sci 292:817–828CrossRefGoogle Scholar
  8. 8.
    Zabek D, Taylor J, Le Boulbar E, Bowen CR (2015) Micropatterning of flexible and free standing polyvinylidene difluoride (PVDF) films for enhanced pyroelectric energy transformation. Adv Energy Mater 5:1401891CrossRefGoogle Scholar
  9. 9.
    Dong WT, Xiao L, Hu W, Zhu C, Huang YA, Yin ZP (2017) Wearable human–machine interface based on PVDF piezoelectric sensor. T I Meas Control 39:398–403CrossRefGoogle Scholar
  10. 10.
    Lopes AC, Gutierrez J, Barandiaran JM (2018) Direct fabrication of a 3D-shape film of polyvinylidene fluoride (PVDF) in the piezoelectric beta-phase for sensor and actuator applications. Eur Polym J 99:111–116CrossRefGoogle Scholar
  11. 11.
    Fu YM, He HX, Zhao TM, Dai YT, Han WX, Ma J, Xing LL, Zhang Y, Xue XY (2018) A self-powered breath analyzer based on PANI/PVDF piezo-gas-sensing arrays for potential diagnostics application. Nano Micro Lett 10:1–12CrossRefGoogle Scholar
  12. 12.
    Motamedi AS, Mirzadeh H, Hajiesmaeilbaigi F, Bagheri-Khoulenjani S, Shokrgozar M (2017) Effect of electrospinning parameters on morphological properties of PVDF nanofibrous scaffolds. Prog Biomater 6:113–123CrossRefGoogle Scholar
  13. 13.
    Gee S, Johnson B, Smith AL (2018) Optimizing electrospinning parameters for piezoelectric PVDF nanofiber membranes. J Membr Sci 563:804–812CrossRefGoogle Scholar
  14. 14.
    Xing J, Ni QQ, Deng BY, Liu QS (2016) Morphology and properties of polyphenylene sulfide (PPS)/polyvinylidene fluoride (PVDF) polymer alloys by melt blending. Compos Sci Technol 134:184–190CrossRefGoogle Scholar
  15. 15.
    Sun D, Yue DM, Li BB, Zheng ZS, Meng XC (2019) Preparation and performance of the novel PVDF ultrafiltration membranes blending with PVA modified SiO2 hydrophilic nanoparticles. Polym Eng Sci 59:E412–E421CrossRefGoogle Scholar
  16. 16.
    Sidorina AI, Druzhinina TV (2016) Macrostructure of polyacrylonitrile nanofibers produced by electrospinning. Fibre Chem 47:362–366CrossRefGoogle Scholar
  17. 17.
    Choi S, Kim HR, Jeong YK (2018) Mechanism of electrospinning for poly(amic acid)/polyacrylonitrile fiber fabrication. J Macromol Sci Part B Phys 57:222–230CrossRefGoogle Scholar
  18. 18.
    Guo ZW, Nilsson E, Rigdahl M, Hagström B (2013) Melt spinning of PVDF fibers with enhanced β phase structure. J Appl Polym Sci 130:2603–2609CrossRefGoogle Scholar
  19. 19.
    Hossein F, Mohammad MA, Parastoo S, Nima Z, Li QX, Minoo N (2016) Morphological changes towards enhancing piezoelectric properties of PVDF electrical generators using cellulose nanocrystals. Cellulose 23:3625–3637CrossRefGoogle Scholar
  20. 20.
    Neppalli R, Wanjale S, Birajdar M, Causin V (2013) The effect of clay and of electrospinning on the polymorphism, structure and morphology of poly(vinylidene fluoride). Eur Polym J 49:90–99CrossRefGoogle Scholar
  21. 21.
    Layek RK, Samanta S, Chatterjee DP, Nandi AK (2010) Physical and mechanical properties of poly(methyl methacrylate)-functionalized graphene/poly(vinylidine fluoride) nanocomposites Piezoelectric beta polymorph formation. Polymer 51:5846–5856CrossRefGoogle Scholar
  22. 22.
    Gaur MS, Indolia AP, Rogachev AA, Rahachou AV (2015) Influence of SiO2 nanoparticles on morphological, thermal, and dielectric properties of PVDF. J Therm Anal Calorim 122:1403–1416CrossRefGoogle Scholar
  23. 23.
    Wang G, Liu T, Sun XC, Li P, Xu YS, Hua JG, Yu YH, Li SX, Dai YZ, Song YX, Lv C, Xia H (2018) Flexible pressure sensor based on PVDF nanofiber. Sens Actuator A Phys 280:319–325CrossRefGoogle Scholar

Copyright information

© Iran Polymer and Petrochemical Institute 2019

Authors and Affiliations

  1. 1.State Key Laboratory for Hubei New Textile Materials and Advanced Processing TechnologyWuhan Textile UniversityWuhanChina

Personalised recommendations