Advertisement

Iranian Polymer Journal

, Volume 27, Issue 11, pp 899–911 | Cite as

Interactive effect of ammonium polyphosphate and montmorillonite on enhancing flame retardancy of polycarbonate/acrylonitrile butadiene styrene composites

  • Soo-Tueen Bee
  • Kien-Sin Lim
  • Lee Tin Sin
  • Chantara Thevy Ratnam
  • Soo Ling Bee
  • Abdul Razak Rahmat
Original Research

Abstract

The effect of two flame retardants [ammonium polyphosphate (APP) and montmorillonite (MMT)] was studied in relation to flame retardancy, mechanical properties and physical characteristics of polycarbonate (PC)/acrylonitrile butadiene styrene (ABS) blends. Moreover, the possible synergistic effect of these two flame retardant additives on the macromolecular blends was studied as well. Based on this research, it was revealed that APP- and MMT-raised loading has significantly increased the limiting oxygen index (LOI) of the resulting PC/ABS blends, which is due to the intumescence effect provoked by the incorporation of these flame retardant fillers. Incorporation of APP improved the LOI through intumescence effect while the addition of MMT led to intercalation of PC/ABS polymer matrix into the interlayer galleries of MMT particles. Besides, higher APP loading in PC/ABS blends has significantly promoted the formation of carbonaceous char residues as evidenced in TGA analysis, which indicates that addition of higher APP could improve thermal stability of PC/ABS blends. To improve the tensile strength and elongation-at-break, APP loading of 25 phr in PC/ABS blends together with various MMT loading would be suitable to ensure good dispersion and interfacial adhesion between the polymer chains and the additives. However, it is important to control the loading level of MMT as its excessive incorporation could result in flame-retarded PC/ABS blends with brittle behavior, showing weaker mechanical properties.

Keywords

Ammonium polyphosphate Flame retardance Mechanical properties Montmorillonite Thermogravimetric analysis 

Notes

Acknowledgements

The authors are very grateful to Malaysian Nuclear Agency, Bangi, Selangor for allowing usage their equipments on performing this research.

References

  1. 1.
    Wang H, Zhou H, Huang Z, Zhang Y, Qiao H, Yu Z (2016) Experimental investigation and modeling of the mechanical behavior of PC/ABS during monotonic and cyclic loading. Polym Test 50:216–223CrossRefGoogle Scholar
  2. 2.
    Suarez H, Barlow JW, Paul DR (1984) Mechanical properties of ABS/polycarbonate blends. J Appl Polym Sci 29:3253–3259CrossRefGoogle Scholar
  3. 3.
    Bee ST, Sin LT, Ch’ng BS, Ratnam CT, Rahmat AR (2018) Electron beam irradiation of zinc borate flame retardant containing acrylonite-butadiene-styrene (ABS) composites. J Polym Res 25:89CrossRefGoogle Scholar
  4. 4.
    Yuan B, Fan A, Yang M, Cjen X, Hu Y, Bao C, Jiang S, Niu Y, Zhang Y, Dai H (2017) The effects of graphene on the flammability and fire behaviour of intumescent flame retardant polypropylene composites at different flame scenarios. Polym Degrad Stab 143:42–56CrossRefGoogle Scholar
  5. 5.
    Lu H, Song L, Hu Y (2011) A review on flame retardant technology in China. Part II: flame retardant polymeric nanocomposites and coatings. Polym Adv Technol 22:379–394CrossRefGoogle Scholar
  6. 6.
    Zhang Y, Li X, Fang Z, Hull TR, Kelarakis A, Stec AA (2017) Mechanism of enhancement of intumescent fire retardancy by metal acetates in polypropylene. Polym Degrad Stab 136:139–145CrossRefGoogle Scholar
  7. 7.
    Cullis CF, Hirschler MM, Tao QM (1991) Studies of the effects of phosphorus-nitrogen-bromine systems on the combustion of some thermoplastic polymers. Eur Polym J 27:281–289CrossRefGoogle Scholar
  8. 8.
    Lin Y, Jiang S, Hu Y, Chen G, Shi X, Peng X (2018) Hybrids of aluminum hypophosphite and ammonium polyphosphate: highly effective flame retardant system for unsaturated polyester resin. Polym Compos 39:1763–1770CrossRefGoogle Scholar
  9. 9.
    Laoutid F, Bonnaud L, Alexandre M, Lopez-Cuesta JM, Dubois P (2009) New prospects in flame retardant polymer materials: from fundamentals to nanocomposites. Mater Sci Eng R Rep 63:100–125CrossRefGoogle Scholar
  10. 10.
    Liu W, Wang D, Zhang Y, Bai T, Li J (2018) Flammability and flame-retardant mechanism of high density polyethylene/wood fiber/modified ammonium polyphosphate composite. Polym Compos 39:1192–1199CrossRefGoogle Scholar
  11. 11.
    Meri RM, Zicans J, Ivanova T, Berzina R, Saldabola R, Maksimovs R (2015) The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene styrene (ABS). Compos Struct 134:950–956CrossRefGoogle Scholar
  12. 12.
    Arostegui A, Sarrionandia M, Aurrekoetxea J, Urrutibeascoa I (2006) Effect of dissolution-based recycling on the degradation and the mechanical properties of acrylonitrile-butadiene-styrene copolymer. Polym Degrad Stab 91:2768–2774CrossRefGoogle Scholar
  13. 13.
    Zhang Y, Chen X, Fang Z (2013) Synergistic effects of expandable graphite and ammonium polyphosphate with a new carbon source derived from biomass in flame retardant ABS. J Appl Polym Sci 128:2424–2432CrossRefGoogle Scholar
  14. 14.
    Ge LL, Duan HJ, Zhang XG, Chen C, Tang JH, Li ZM (2012) Synergistic effect of ammonium polyphosphate and expandable graphite on flame-retardant properties of acrylonitrile-butadiene-styrene. J Appl Polym Sci 126:1337–1343CrossRefGoogle Scholar
  15. 15.
    Xia Y, Jian XG, Li JF, Wang XH, Xu YY (2007) Synergistic effect of montmorillonite and intumescent flame retardant on flame retardance enhancement of ABS. Polym-Plast Technol Eng 46:227–232CrossRefGoogle Scholar
  16. 16.
    Wang S, Hu Y, Song L, Wang Z, Chen Z, Fan W (2002) Preparation and thermal properties of ABS/montmorillonite nanocomposite. Polym Degrad Stab 77:423–426CrossRefGoogle Scholar
  17. 17.
    Suzuki M, Wilkie CA (1995) The thermal degradation of acrylonitrile-butadiene-styrene terpolymer as studied by TGA/FTIR. Polym Degrad Stab 47:217–221CrossRefGoogle Scholar
  18. 18.
    Bourbigot S, Bras MJ, Dabrowski F, Gilman JW, Kashiwagi T (2000) PA-6 clay nanocomposite hybrid as char forming agent in intumescent formulations. Fire Mater 24:201–208CrossRefGoogle Scholar
  19. 19.
    Wang S, Hu Y, Wang Z, Yong T, Chen Z, Fan W (2003) Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites. Polym Degrad Stab 80:157–161CrossRefGoogle Scholar
  20. 20.
    Bee ST, Hassan A, Ratnam CT, Tee TT, Sin LT, Hui D (2014) Dispersion and roles of montmorillonite on structural, flammability, thermal and mechanical behaviours of electron beam irradiated flame retarded nanocomposite. Compos Part B: Eng 61:41–48CrossRefGoogle Scholar
  21. 21.
    He X, Zhang W, Yi D, Yang R (2016) Flame retardancy of ammonium polyphosphate-montmorillonite nanocompounds on epoxy resin. J Fire Sci 34:212–225CrossRefGoogle Scholar
  22. 22.
    Castrovinci A, Camino G, Drevelle C, Duquesne S, Magniez C, Vouters M (2005) Ammonium polyphosphate-aluminum trihydroxide antagonism in fire retarded butadiene-styrene block copolymer. Eur Polym J 41:2023–2033CrossRefGoogle Scholar
  23. 23.
    Bee ST, Hassan A, Ratnam CT, Tee TT, Lee TS (2014) Interactions of montmorillonite and electron beam irradiation in enhancing the properties of alumina trihydrate-added polyethylene and ethylene vinyl acetate blends. J Compos Mater 48:1155–1171CrossRefGoogle Scholar
  24. 24.
    Bee ST, Hassan A, Ratnam CT, Tee TT, Sin LT (2013) Investigation of nano-size montmorillonite on electron beam irradiated flame retardant polyethylene and ethylene vinyl acetate blends. Nucl Inst Meth Phys Res B 299:42–50CrossRefGoogle Scholar
  25. 25.
    Ferfera-Harrar H, Dairi N (2014) Green nanocomposite films based on cellulose acetate and biopolymer-modified nanoclays: studies on morphology and properties. Iran Polym J 23:917–931CrossRefGoogle Scholar
  26. 26.
    Jiang W, Hao J, Han Z (2012) Study on the thermal degradation of mixtures of ammonium polyphosphate and a novel caged bicyclic phosphate and their flame retardant effect in polypropylene. Polym Degrad Stab 97:632–637CrossRefGoogle Scholar
  27. 27.
    Li J, Ke C, Xu L, Wang Y (2012) Synergistic effect between a hyperbranched charring agent and ammonium polyphosphate on the intumescent flame retardance of acrylonitrile-butadiene-styrene polymer. Polym Degrad Stab 97:1107–1113CrossRefGoogle Scholar
  28. 28.
    Lim KS, Bee ST, Sin LT, Tee TT, Ratnam CT, Hui D, Rahmat AR (2016) A review of application of ammonium polyphosphate as intumescent flame retardant in thermoplastic composites. Compos Part B: Eng 84:155–174CrossRefGoogle Scholar
  29. 29.
    Bee ST, Hassan A, Ratnam CT, Tee TT, Sin LT (2012) Effects of montmorillonite on the electron beam irradiated alumina trihydrate added polyethylene and ethylene vinyl acetate nanocomposite. Polym Compos 33:1883–1892CrossRefGoogle Scholar
  30. 30.
    Heidar Pour R, Soheilmoghaddam M, Hassan A, Bourbigot S (2015) Flammability and thermal properties of polycarbonate/acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene. Polym Degrad Stab 120:88–97CrossRefGoogle Scholar
  31. 31.
    Lu C, Liu L, Chen N, Wang X, Yang D, Huang XH, Yao DH (2015) Influence of clay dispersion on flame retardancy of ABS/PA6/APP blends. Polym Degrad Stab 114:16–29CrossRefGoogle Scholar
  32. 32.
    Wang Z, Jiang S, Sun H (2017) Expanded polystyrene foams containing ammonium polyphosphate and non-zirconia with improved flame retardancy and mechanical properties. Iran Polym J 26:71–79CrossRefGoogle Scholar
  33. 33.
    Wang W, Chen X, Gu Y, Jiao C (2018) Synergistic fire safety effect between nano-CuO and ammonium polyphosphate in thermoplastic polyurethane elastomer. J Therm Anal Calorim 131:3175–3183CrossRefGoogle Scholar

Copyright information

© Iran Polymer and Petrochemical Institute 2018

Authors and Affiliations

  1. 1.Department of Chemical Engineering, Lee Kong Chian Faculty of Engineering and ScienceUniversiti Tunku Abdul RahmanKajangMalaysia
  2. 2.Radiation Processing Technology DivisionMalaysian Nuclear AgencyKajangMalaysia
  3. 3.School of Materials and Mineral Resources Engineering, Engineering CampusUniversiti Sains MalaysiaNibong TebalMalaysia
  4. 4.Department of Polymer Engineering, Faculty of Chemical EngineeringUniversiti Teknologi Malaysia, UTMSkudaiMalaysia

Personalised recommendations