Iranian Polymer Journal

, Volume 23, Issue 10, pp 801–807 | Cite as

Investigating effect of ferric stearate on stabilization efficiency of a phenolic antioxidant during thermal oxidation of polyethylene

  • Mona Mohammadhosseini
  • Reza JahanmardiEmail author
Original Paper


This study aimed to achieve a formulation for an additive to produce oxo-biodegradable films that accelerates oxidative degradation of the films after preservation of properties over a span of desired service life. Thermal oxidation behavior of high-density polyethylene (HDPE) films (approximately 250 μm thick) containing various weight ratios of a commercially used phenolic antioxidant (Irganox 1010) to ferric stearate as pro-oxidant has been studied in both melt and solid states. Thermo-oxidative stability in melt state was studied using differential scanning calorimetry. The rate of thermal oxidation in solid state was investigated via oven aging experiments at 90 °C followed by measuring changes in tensile properties, gel content, carbonyl index and density. Comparing thermo-oxidative stability of the HDPE samples containing a combination of Irganox 1010 and ferric stearate with the samples containing Irganox 1010 alone confirmed that ferric stearate reduces the stabilization efficiency of the phenolic antioxidant in the polymer either in melt or in solid state. It was also shown that the efficiency of the phenolic antioxidant in thermo-oxidative stabilization of the polymer in both melt and solid states could be changed by altering weight ratio of Irganox 1010/ferric stearate. On the basis of the obtained results, it was concluded that weight ratio of 0.1/0.1 wt% of the antioxidant to the pro-oxidant is suitable for attaining desired stability during melt processing as well as retaining properties during a reasonable service life when is used as a film and a favorable rate of thermal oxidation after the service life.


Polyethylene Antioxidant Pro-oxidant Thermal oxidation 


  1. 1.
    Guillet JE (1995) In: Gilead D, Scott G (eds) Degradable polymers: principals and applications. Chapman & Hall, LondonGoogle Scholar
  2. 2.
    Gugumus F (2000) In: Hamid SH (ed) Handbook of polymer degradation. Marcel & Dekker, New YorkGoogle Scholar
  3. 3.
    Albertsson AC, Karlsson S (1988) The three stages in degradation of polymers—polyethylene as a model substance. J Appl Polym Sci 35:1289–1302CrossRefGoogle Scholar
  4. 4.
    Albertsson AC, Karlsson S (1998) Biodegradable polymers and environmental interaction. Polym Eng Sci 38:1251–1253CrossRefGoogle Scholar
  5. 5.
    Guillet JE (1973) Polymers and ecological problems. Plenum Press, New YorkCrossRefGoogle Scholar
  6. 6.
    Chaudhuri S, Chakraborty R, Bhattacharya P (2013) Optimization of biodegradation of natural fiber (Chorchorus capsularis): HDPE composite using response surface methodology. Iran Polym J 22:865–875CrossRefGoogle Scholar
  7. 7.
    Djellali S, Haddaoui N, Sadoun T, Bergeret A, Grohens Y (2013) Structural, morphological and mechanical characteristics of polyethylene, poly(lactic acid) and poly(ethylene-co-glycidyl methacrylate) blends. Iran Polym J 22:245–257CrossRefGoogle Scholar
  8. 8.
    Ammala A, Bateman S, Dean K, Patinakis E, Sangwan P, Wong S, Yuan Q, Yu L, Patrick C, Leong KH (2011) An overview of degradable and biodegradable polyolefins. Prog Polym Sci 36:1015–1049CrossRefGoogle Scholar
  9. 9.
    Fontanella S, Bonhomme S (2010) Comparison of the biodegradability of various polyethylene films containing pro-oxidant additives. Polym Degrad Stab 95:1011–1021CrossRefGoogle Scholar
  10. 10.
    Hwu HD, Hsu HY, Chen JH, Jiang SF (1995) Improved metallic soaps of fatty acids for use as photolyzing agents for photodegradable polymer films. US Patent 5,434,277Google Scholar
  11. 11.
    Rodriguez-Vazquez M, Liauw CM, Allen NS, Edge M, Fontan E (2006) Degradation and stabilisation of poly(ethylene-stat-vinyl acetate): 1-spectroscopic and rheological examination of thermal and thermo-oxidative degradation mechanisms. Polym Degrad Stab 91:154–165CrossRefGoogle Scholar
  12. 12.
    Roy PK, Surekha P, Raman R, Rajagopal C (2009) Investigating the role of metal oxidation state on the degradation behaviour of LDPE. Polym Degrad Stab 94:1033–1039CrossRefGoogle Scholar
  13. 13.
    Sharma N, Chang LP, Chu YL, Ismail H, Ishiaku US, ishak ZAM (2001) A study on the effect of prooxidant on the thermo-oxidative degradation behaviour of sago starch filled polyethylene. Polym Degrad Stab 71:381–393CrossRefGoogle Scholar
  14. 14.
    Yang R, Liu Y, Yu J, Wang K (2006) Thermal oxidation products and kinetics of polyethylene composites. Polym Degrad Stab 91:1651–1657CrossRefGoogle Scholar
  15. 15.
    Jahanmardi R, Assempour H (2008) Effects of galbanic Acid on thermal and thermo-oxidative stabilities of LLDPE. Iran Polym J 17:799–806Google Scholar
  16. 16.
    Khabbaz F, Albertsson AC, Karlsson S (1999) Chemical and morphological changes of environmentally degradable polyethylene films exposed to thermo-oxidation. Polym Degrad Stab 63:127–138CrossRefGoogle Scholar
  17. 17.
    Hoang EM, Allen NS, Liauw CM, Fontan E, Lafuente P (2006) The thermo-oxidative degradation of metallocene polyethylenes. Part 1: long-term thermal oxidation in the solid state. Polym Degrad Stab 91:1356–1362CrossRefGoogle Scholar
  18. 18.
    Jakubowicz I, Yarahmadi N, Petersen H (2006) Evaluation of the rate of abiotic degradation of biodegradable polyethylene in various environments. Polym Degrad Stab 91:1556–1562CrossRefGoogle Scholar
  19. 19.
    Boukezzi L, Boubakeur A, Laurent C, Lallouani M (2008) Observations on structural changes under thermal ageing of cross-linked polyethylene used as power cables insulation. Iran Polym J17:611–624Google Scholar
  20. 20.
    Gugumus F (2002) Re-examination of the thermal oxidation reactions of polymers2. Thermal oxidation of polyethylene. Polym Degrad Stab 76:329–340CrossRefGoogle Scholar
  21. 21.
    Roy PK, Surekha P, Rajagopal C, Chatterjee SN, Chouodhary V (2007) Studies on the photo-oxidative degradation of LDPE films in the presence of oxidised polyethylene. Polym Degrad Stab 92:1151–1160CrossRefGoogle Scholar
  22. 22.
    Allen NS, Edge M (1992) Fundamentals of polymer degradation and stabilization. Elsevier, LondonGoogle Scholar
  23. 23.
    La Mantia FP, Dintcheva NT (2004) Photooxidation and stabilization of photooxidized polyethylene and of its monopolymer blends. Appl Polym Sci 91:2244–2255CrossRefGoogle Scholar
  24. 24.
    Gulmine JV, Janissek PR, Heise HM, Akcelrud L (2003) Degradation profile of polyethylene after artificial accelerated weathering. Polym Degrad Stab 79:385–397CrossRefGoogle Scholar
  25. 25.
    Jose J, Nag A, Nando GB (2014) Environmental ageing studies of impact modified waste polypropylene. Iran Polym J 23:619–636CrossRefGoogle Scholar

Copyright information

© Iran Polymer and Petrochemical Institute 2014

Authors and Affiliations

  1. 1.Department of Polymer EngineeringScience and Research Branch, Islamic Azad UniversityTehranIran

Personalised recommendations