Advertisement

Metallography, Microstructure, and Analysis

, Volume 7, Issue 5, pp 618–626 | Cite as

The Effect of New Double Solution Heat Treatment on the High Manganese Hadfield Steel Properties

  • Mahboobeh Azadi
  • Ali Mirani Pazuki
  • Mohammad Javad Olya
Technical Note

Abstract

In this paper, the influence of double solution process on microstructure changes and the hardness behavior of Hadfield steel at different quenching environments were investigated. High magnesium (17.5 wt.%) Hadfield steel with different mean grain sizes, alloy carbides, and sulfides inclusions was prepared during different heat treatments. Scanning electron microscopy, optical microscopy, X-ray diffraction, energy-dispersive spectrometry, and Rockwell B hardness test (HRB) were used to study the microstructural features and properties of various samples. Results show that the double solution heat treatments were more effective than the standard solution process to dissolve more amount of carbides in the austenite phase. The specimen, which had the mean grain size of 145 μm through the double solution process at 1100 °C, contained lower amount of sulfides inclusions and showed lowest hardness (92.1 HRB). However, the salt solution quenching environment had a fast quenching rate to dissolve more amount of carbides, and this environment caused microscopic cracks on the specimen surface. This environment could be substituted by the mixture of water and ice with the temperature of 0 °C in the second stage of solution heat treatment. In this situation, the mean grain size decreased to 115 μm to show the higher hardness value of 95.4 HRB, although a small amount of (Fe, Mn)3C phase was distributed in the austenite matrix.

Keywords

Hadfield steel High manganese steel Double solution Quenching rate Hardness Microstructure 

References

  1. 1.
    A.F. Khan, A.M. Rana, M.U.I. Islam, T. Abbas, Microstructural changes in Hadfield steel, Pakistan. J. Appl. Sci. 1(3), 317–320 (2001)CrossRefGoogle Scholar
  2. 2.
    L. Qian, X. Feng, F. Zhang, Deformed microstructure and hardness of Hadfield high manganese steel. Mater. Trans. 52, 1623–1628 (2011)CrossRefGoogle Scholar
  3. 3.
    S.W.B Hero, B. Nyembe, K. Lentsoana, Common failure of Hadfield steel in application, in International Conference on Mining, Mineral Processing and Metallurgical Engineering (ICMMME) April 1516 (2014) Johannesburg, South Africa Google Scholar
  4. 4.
    E.G. Moghaddam, N. Varahram, P. Davami, On the comparison of microstructural characteristics and mechanical properties of high-vanadium austenitic manganese steels with the Hadfield steel. Mater. Sci. Eng., A 532, 260–266 (2012)CrossRefGoogle Scholar
  5. 5.
    A.K. Srivastava, K. Das, Microstructural characterization of Hadfield austenitic manganese steel. J. Mater. Sci. 43, 5654–5658 (2008)CrossRefGoogle Scholar
  6. 6.
    G. Tecza, S. Sobula, Effect of heat treatment on change microstructure of cast high-manganese Hadfield steel with elevated chromium content. Arch. Foundry Eng. 14, 67–70 (2014)Google Scholar
  7. 7.
    S. Hosseini, M.B. Limooei, Optimization of heat treatment to obtain desired mechanical properties of high carbon Hadfield steels. World Appl. Sci. J. 15(10), 1421–1424 (2011)Google Scholar
  8. 8.
    R. Ueji, D. Kondo, Y. Takagi, T. Mizuguchi, Y. Tanaka, K. Shinagawa, Grain size effect on high-speed deformation of Hadfield steel. J. Mater. Sci. 47, 7946–7953 (2012)CrossRefGoogle Scholar
  9. 9.
    C. Chen, X.Y. Feng, B. Lv, Z.N. Yang, F.C. Zhang, A study on aging carbide precipitation behavior of Hadfield steel by dynamic elastic modulus. Mater. Sci. Eng., A 677, 446–452 (2016)CrossRefGoogle Scholar
  10. 10.
    A. Pribulova, J. Babic, D. Baricova, Influence of Hadfield´s steel composition on its mechanical properties. Chem. Listy 105, 430–432 (2011)Google Scholar
  11. 11.
    J.O. Agunsoye, S.I. Talabi, O. Bello, Wear characteristics of heat-treated Hadfield austenitic manganese steel for engineering application. Adv. Prod. Eng. Manag. 10(2), 97–107 (2015)Google Scholar
  12. 12.
    R. Lencina, C. Caletti, K. Brunelli, R. Micone, Assessing wear performance of two high-carbon Hadfield steels through field tests in the mining industry. Procedia Mater. Sci. 9, 358–366 (2015)CrossRefGoogle Scholar
  13. 13.
    J.O. Agunsoye, S.A. Balogun, D.E. Esezobor, M. Nganbe, Wear of Hadfield austenitic manganese steel casting. Adv. Prod. Eng. Manag. 10, 97–107 (2015)Google Scholar
  14. 14.
    J.O. Olawale, S.A. Ibitoye, M.D. Shittu, Work hardening behavior and microstructural analysis of failed austenitic manganese steel crusher jaws. Mater. Res. 16, 15–30 (2013)CrossRefGoogle Scholar
  15. 15.
    M. Azadi, A.S. Rouhaghdam, S. Ahangarani, H.H. Mofidi, Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel. Surf. Coat. Technol. 245, 156–166 (2014)CrossRefGoogle Scholar
  16. 16.
    J.O. Agunsoye, T.S. Isaac, A.A. Abiona, On the comparison of microstructure characteristics and mechanical properties of high chromium white iron with the Hadfield austenitic manganese steel. J. Miner. Mater. Charact. Eng. 1, 24–28 (2013)Google Scholar
  17. 17.
    S.R. Allahkaram, Cause of catastrophic failure of high Mn steel utilized as crusher overlaying shields. Int. J. Eng. Trans. B 21(1), 55–65 (2008)Google Scholar
  18. 18.
    W. Yan, L. Fang, K. Sun, Y. Xu, Effect of surface work hardening on wear behavior of Hadfield steel. Mater. Sci. Eng., A 460–461, 542–549 (2007)CrossRefGoogle Scholar
  19. 19.
    S. German, Steel Heat Treatment, Metallurgy and Technologies (Taylor and Francis, London, 2004)Google Scholar
  20. 20.
    A.K. Srivastava, K. Das, S.K. Toor, Corrosion behavior of TiC-reinforced Hadfield manganese austenitic steel matrix in situ composites. Open J. Met. 5, 11–17 (2015)CrossRefGoogle Scholar
  21. 21.
    S. Hosseini, M.B. Limooei, M. Hossein Zade, E. Askarnia, Z. Asadi, Optimization of heat treatment due to austenising temperature, time and quenching solution in Hadfield steels. Int. J. Chem. Mol. Nucl. Mater. Metall. Eng. 7, 582–586 (2013)Google Scholar
  22. 22.
    M.K.E. Fawkhry, A.M. Fathy, M.M. Eissa, H.E. Faramway, Eliminating heat treatment of Hadfield steel in stress abrasion wear applications. Int. J. Met. Cast. 8, 29–36 (2014)Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature and ASM International 2018

Authors and Affiliations

  • Mahboobeh Azadi
    • 1
  • Ali Mirani Pazuki
    • 1
  • Mohammad Javad Olya
    • 1
  1. 1.Faculty of Materials and Metallurgical EngineeringSemnan UniversitySemnanIran

Personalised recommendations